HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

Similar Questions

• Windows 7 - print spooler starts is not after the October 14 update

  I have a HP pavilian HPE running Windows 7 professional 64-bit.   After that the windows updates were installed on 14 October, the print spooler service does not start.  So yesterday I used the system restore to go back, and the problem was solved.  Today, I removed some old print drivers and re-installed updates, and now the print spooler service does not start again.

  What should do?

  Hi Matthew,

  Thanks for posting on Microsoft Community.

  We are sorry for the inconvenience caused to you. We will help you resolve the problem you are having with.

  Before following the steps below, I would like to ask you a question in relation to your query.

  You get an error message when the print spooler service stops?

  Try these steps and see if it helps:

  Step 1: Press the Windows key + R on the keyboard, type services.msc and press enter.

  Step 2: You can get the Print Spooler Service in the window and double-click it.
  Step 3: Check if the Startup type is set to Automatic. If this isn't the case, set it to automatic and restart your PC.
  Step 4: Check if the Print Spooler Service restarts automatically on reboot (given that the startup type is set to automatic).

  Step 5: Also check if the status shows running under the status column in the print spooler service.

  I hope this helps!
   
  Download to us if you have any questions about Windows, we will be happy to help you.
   
  Thank you.

• OBIEE 11 g "eas" starts is not after the execution of OBIEE as Windows Services

  After having configured AdminServer and BIServer to run as Windows Services, two deployments has not started in WebLogic. One was "bi content server" and the other is 'EE '.

  I had the 'bi content server' to start adding the environment however 'EE' BI_ORACLE_HOME variable still does not start.

  
  Is there an other environment variable must be set to the EAS?

  OBIEE 11.1.1.7.0

  Windows 2008 R2 Enterprise SP1

  You a fix it by adding the path of \Oracle_BI1\products\Essbase\eas\server\bin [middleware_home] in the PATH environment variable in one of the two locations at the end of the line. Either location is acceptable, it is preferably where you place.

  1. In the environment variable PATH for the windows service.

     For example:

     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Oracle bifoundation_domain_bi_server1\Parameters\Path

     You can place the path at the end of the string

  2. In the PATH environment variable of the Windows system on the server.

     For example:

     My computer-> properties-> system settings advanced-> Environment Variables

• Windows starts is not after the upgrade to 8 GB of ram on Dv6 3200

  I have a dv6 - 3220tx with Windows 7 64 bit Home Premium edition

  When I start the laptop with the 2 sticks of PC3-12800 4 GB of ram installed, it will start and go to the screen where it told me that windows has had a mistake and asks if I want to 'start windows normally or launch start up repair. If I choose start windows normally, it will go to the screen where it says "starting windows" and go back to the Hp screen then to the same ' start windows normally or.. "screen. Same thing happens when I want to launch start up repair.

  Hello

  It accepts DDR3 PC3-8500 or DDR3 PC3-10600. This means that it cannot agree to 12800. I have not tried 12800.

  Kind regards.

• First Pro CC2015.2 starts is not after the upgrade

  I'm on WIndows 7 using a Z820 workstation HP with Xeon processors and not updating applications seem to work as expected. PP would load and appear in the Task Manager, but would not load the user interface. AFX seems to hang without any notification. Photoshop does not load the Welcome screen (which could be a new default) and doesn't connect to the libraries. The same Illustrator and seems to crash on quit.

  Hope the downgrade works for the moment

  Before opening applications have you restart your computer after the update?

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Edge 13 - start is not after the BIOS update

  Hello

  I have a Thinkpad Edge 13 0196 - 32G and had problems with the battery capacity. Windows 7 has shown a red cross next to the battery icon, battery lasted very little).

  A representative of the Romanian Lenovo Lenovo Support suggested that I have make a few updates in the following order:

  -last update of the BIOS

  -last Power Manager

  -last power manager driver

  -latest firmware of the battery

  -perform a battery to reset using Power Manager

  I downloaded the above and started the process with update of the BIOS, but during the final phase, if the update, the computer stops suddenly (I wasn't looking at the screen at that moment), and the computer is now * try * to begin with, but it seems not somehow.

  Here's what happens:

  -the Red led lights up every now and then, during short periods of time (~ 1 second)

  -When it turns off, I hear a sound mechanical sorting of the left side of the laptop, I believe it's from the hard drive

  -the process repeats indefinitely

  -I can shut down the computer by pressing the button for a few seconds.

  I'm desperate! How could this have happened?

  Please give me some clue as to how I can start the computer and solve this problem - I have some very important documents on the hard drive.

  Thank you

  Change later [1]: I tried to install the BIOS version is 1.19-1.13(6YET36WW)/1.24-1.13(6ZET37WW)

  (that's what he said when I start the BIOS Setup

  Change later [2]: I read in the file read me the utility to update the BIOS if the computer crashes, you should unplug the power and remove the battery, then put back them and try to start the computer - it worked, and now I'm in the last stages of the above mentioned battery update procedure.

  For those expierencing a battery problem with their ThinkPad Edge 13 with machine type models 0196, 0197, 0492, it would be prudent to first check this firmware for you the battery.

  A few other steps you can take with your machine in addition to those you listed is a discharge of static electricity. Here's how to make the discharge of static electricity:

  • Unplug the power supply
  • Remove the battery
  • Unplug cords or express cards
  • Press the button power 10 times and the 10th press hold for 30 seconds

  In addition, you also meet noise hard drive? If so, can you describe the noise you hear?

• HP 2000 2116 you crash

  My HP 2000 2116 you everything hangs and crashes, itz jst 3 months old, needed help. He had 8 installed windows before with the same problem, so I changed to windows7 and the problem still persists... Gives some 'KERNEL_PAGE_ERROR', sometimes screen dosent light up / failure screen and sometimes "ERROR 0xc00000e9 IO error reading '... Help, please...

  My research into the errors in the original post has indicated it might be a problem of BIOS or hardware failure.  Since you received a failure on a Long DST test, this does not mean that there is a problem with the HARD drive.  My recommendation is to contact HP to service because it must be under warranty if he just bought three months ago.  The number of HP in the United States and the Canada is 1-800-474-6836.  If you reside outside the United States and the Canada, go here and select your country for contact information.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• HP deskjet 3050 a j611 can not find the driver software when connected

  I tried to plug my new printer Hp deskjet 3050 a j611 range but can't get furthur than coonecting because it can not find the driver software. I had to download the driver software myself via this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=5061082& but once I downloaded that and is entered in the details of the wireless connection, it cannot find the driver software. I can't use the CD my drive is broken and I am awaitng delivery of an external in a few weeks, but I'd like to get my printer started. Help, please

  Hello Buzbybumble

  I looked into it further and found that all J611 Deskjet 3050 a models use the same software. So, you should be able to download and run the installation from the link below.
  Software HP Deskjet 3050 has complete features J611

  IMPORTANT: Make sure that the printer is not connected to the computer until the installation program ask you to do. Run the Setup and follow the instructions on the screen.

  If the printer is not yet seen, then choose the option "continue INSTALLATION WITHOUT CONNECTION NOW I WILL CONNECT the PRINTER LATER. A shortcut must be placed on your desktop and it will try to add a printer when it is executed.

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

  Hi all.

  I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

  I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

  Thanks in advance.

  The problem is simple.
  Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

  The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

  In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

  Mayen a user manual would provide details on the management of records.
  If not, then contact the ASP in your country and ask some compatible devices!

  At soon buddy

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!