HP 2000: Start window

Is there another way for me to reset my laptop rather than press F11 or start-up because my laptop is light and the start of the HP logo

Hello

If this isn't the start of the dvd, try the following.

Start Notepad, insert the Windows 10 installation disc, and then stop the laptop by pressing the button of power continuously for 10 seconds.

Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

Use the arrow keys to select the CDROM (uefi) option and press ENTER - if you are prompted to "Press any key to continue...". "- make.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • How can I start windows in safe mode if I have the error status code 2000-142 7?

    I NEED TO KNOW HOW TO START WINDOWS IN SAFE MODE, I CAN GO TO THE INSTALLATION PAGE BUT ONLY THEN, HOW I START ON SAFE MODE?

    Hello

    Looks like your hard drive is defective or has failed.

    Use the following steps to confirm that.

    Hard drive:

    Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

    See you soon.

  • Re: C855-1EL Satellite will not start Windows system

    I have had trouble with my Satellite C855 1EL lately and now cannot even start Windows.
    The black screen reads the following:

    Intel UNDI, PXE - 2.1 (build 083) Copyright (C) 1997-2000 Intel CorporationThis product is covered by one or more of the following patents: US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, U.S. 6 115 776 andUS6, 327, 625
    Series of Realtek PCIe FE Family Controller v1.24 (07/10/10)
    Press the buttons on the unit...

    and when I formatted I find no hard drive

    Hello

    As I understood the message: the HDD doesn't appear when you try to install the system. Right?
    HARD drive is listed in the BIOS?
    It should appear on the first page of the BIOS, providing details on the size of the HARD drive and name (part number)

    If this isn't the case, the HARD drive may be defective and that's why the system cannot be started.

  • Why have we not to sign in each time you start Windows 8?

    Separated from this thread.

    Why when we start windows 8 we must sign each time, boring

    It takes, it's your choice.  It's the same for 19 years.  Here's how:

    How to ignore the display of connection under Windows 95, 98, 2000, XP, Vista, 7, 8, 8.1 and Windows 10 [Video]

  • Unable to start Windows

    I have an iMac 13.2 running OS x 10.11 El Capitan, I also use windows 8.1 as a secondary OS for some of my games.

    The problem is that I wanted to try the Beta of Sierra 10.12 and partitioned my HARD drive for the triple boot, version beta worked fine, but when I tried to start on windows, I got a message saying "no operating system found". There are still some my data on the bootcamp partition, but I can't start windows... Is there a way to fix this? I don't want to back up my important files and reinstall everything...

    You cannot partition a disk containing a Boot Camp partition. Back up your data, then start again.

  • How can I get Thunderbird to start automatically when I start Windows

    I would like to than Thunderbird to start automatically whenever I start Windows running. It is how I get my calendar early alerts.

    This would be a feature of Windows rather than a feature of Thunderbird.
    http://Windows.Microsoft.com/en-us/Windows/run-program-automatically-Windows-starts#1TC=Windows-7

  • How can I find the default firefox start window so I can sync my phone and android

    I have trouble finding my starting window of Firefox so that I can get my android and phone in sync with my computer.

    Are what "start Firefox window" you referring?

  • Satellite P300 with XP hangs at the screen "starting windows."

    I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

    When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

    Thank you

    > There was an ASP.NET account, and he disappeared after the update of the BIOS
    The whole story is really strange

    I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
    Then install all service packs, hotfixes and patches of the XP!

    Simply show words on XP on P300.
    A friend of mine has installed XP on a P300 yesterday too and the XP works well
    Everything works fine!

  • Equium L20 - cannot start Windows mode of

    Hello

    I was wondering if you can help me. I have an Equium L20 - 197, windows xp home edition. (Also technically challenged!  :)) When I booted my computer laptop first time today, I received this message-

    «We are sorry for the inconvenience, but windows did not start successfully upward...» »
    and he gave me a few methods of commissioning:
    Safe mode
    Safe mode with networking
    Safe mode with command prompt
    Last good Configuration know (your most recent settings that worked)
    and
    Start Windows normally

    I was able to start press start windows normally and start the computer very well. I turned off the computer OK, then it was restarted later without any problems. I then restored in a frame earlier that the system did not work well. Restore seemed to go OK but then my computer froze, then were shut down by pressing the power button.

    However, the laptop will now not reboot. Just as I think it starts it goes to the error message and none of the options will work to start the computer, and I am now stuck on an endless loop of the above message.

    I don't want to use the product recovery disc, that he will wipe away all of the hard drive and I have the info I need access to! I have a recovery CD product for a Fujitsu which has windows xp edition family sp 1 on him. Is it possible that I can use this to start my computer or is there something else I need to do? I thought after pressing F12 and if it is possible to use the other drive Fujitsu to launch boot my system but do not know if this is possible. I don't have an xp disk from toshiba installation disc, when I bought the computer. :(

    I learned by a guy from the computer to the phone that sounds as if I need a new hard drive but would like to explore other methods before you go this route.

    Thank you very much in advance for any help you can give me. Susi

    Hi SusiB_1,

    Unfortunately, if you can start Windows t in any of these modes you have only one option and that is reinstall Windows. I mean you should do? You can do anything in this case

    As you wrote wipes disc, the whole HARD disc Toshiba Recovery and that's right because it of needed to recover to factory settings. But normally you should have a backup of your data or not?
    If this isn't the case, you can access the data, if you put the HARD drive into an external HARD drive enclosure. From another computer, you now have access to these data.

    By the way: for Toshiba recovery disc you n t need a product key. Everything is already done in the recovery image and no activation is necessary. :)

  • Satellite A100 - starts Windows

    Without changing anything, my Satellite A100 starts Windows.

    A screen with Windows foutherstel (failure recovery) gives two options; Start windows normally and start recovery. When I push the first option, there is a quick blue screen, which disappears too quickly to read the music. Finally the resumption of failure screen comes back. in the alternative, there is a system that is said; Recovery Options screen It cannot start the program installated. Click Ok to shut down the computer.

    How can I solve this problem?

    Hi hans_3,

    Maybe something has confused the Windows registry or some important system files and thus, you can t more to start Windows or start the system repair option.

    I think in this case it of necessary to reinstall Windows. Therefore, you can take the Toshiba recovery disc that brings your computer back settings factor o where all the drivers and tools are already installed but it erases the entire HARD disk.
    It only takes a few minutes and needs just a few clicks.

    Good luck! :)

  • Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

    After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.

    Is there any special step before installing a Dual Boot with Ubuntu system?

    My laptop is a Satellite C55 - C - 1 M 0.

    Thank you. Kind regards.

    I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8

  • Tecra S5 - Black display after starting windows XP

    Hello
    I had problems with the display driver last month after the new update, the driver of the original view was gone.
    After some restorations of older versions the screen worked, but not with the original display driver. I was Born the driver on the laptop and the character to install this new, but something is wrong.
    When I start the PC, the bios password is ask, filled, windows XP is started and the screen is dark without courier. Look of the screen reader does not start automatically to start Windows XP.

    What can I do? Only option work you the PC recovery CD?

    You can start a computer laptop properly using SafeMode (F8 at startup) option?

    What can you do?
    In my opinion, you have only two options: to install the Toshiba display driver or install the new OS by using the original recovery disk (radical option but it is better).

  • Satellite C660-1FS - error starting Windows 7

    Hello to everyone. I have this laptop with Windows 7 Home Premium (no data by purchase of installation disc). Since this morning, I feel the following message/problem

    Windows error recovery

    Windows could not start. A recent hardware or software change might be the cause. If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, chose to start windows normally

    Start the reboot system (recommended)

    Start Windows normally

    These two options do not work. In addition, Windows cannot enter Safe Mode. I live in Belgium and I don't know what to do. I will try with windows 7 installation disc a friend (from Dell laptops) or should I contact Toshiba?

    Thanks in advance

    When you start your notebook F8 press to display the advanced startup options.
    You see here option called fix my computer?

    It must be in the first place on the top of the screen.

  • Satellite A660-158 - cannot start Windows

    Toshiba Satellite A660-158

    I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

    My problem:
    Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
    -----
    Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
    1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
    2. choose the language settings, and then click Next.
    3. Select "repair your computer".
    If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

    Status: 0xc000000e

    Details: Unable to start menu, since the required device is inaccessible.
    -----
    Please help me! Idon't know what make me)
    Please write to E-Mail: [email protected]

    Post edited by: HunterS7777777

    Hey,.

    And why do you think the hard drive is faulty?
    Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

    Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

    If you have any other questions, please let us know! :)

  • HP pavilion 15-AC181NIA: laptop hp laptop pavilion 15-AC181NIA Intel pentium my brother is not able to start windows. Windows 8, 64

    The laptop is not booting of windows; Windows 8
    He pointed out that he cannot start Windows

    The test succeeded, past test of memory and hard drive too, installed a new windows 8 pro version, thank you

Maybe you are looking for