HP 255 G1: Internet connection does not

I bought a G1 from 255 HP and I installed a new hard drive and windows 7.  I had a problem with getting my Wi - Fi to work.

I've followed these tips for someone else:

Hello:

Please do...

Go to Device Manager and click on the network controller device.

At the top of the network controller window, click the Details tab.

Now, you see a Description of the list system default list drop-down property.

Drop down on it and select the second element (Hardware ID).

Now, you see 3-4 lines of characters, the upper line starting with PCI\VEN.

After this first line of characters.

Mine is: PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

I don't think so.

If you decide to upgrade to W10 and they do not work, then you can try these.

The revision of the hardware in your PC's atheros wireless card is perhaps too old to run W10.

http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_151470_1

http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_151473_1

Tags: Notebooks

Similar Questions

  • P850 satellite and a WiFi - internet connection does not work well

    Hello

    My internet connection does not work with a Wi - Fi connection.
    I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

    All solutions?

    > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    If such a problem would appear again start the console (window BACK in typing CMS in search)
    Here, use the command * ipconfig / renew *.

  • Cannot install, error 205 (disabling the antivirus does not help, another internet connection does not help)

    Don't know who else can talk me to about it.

    Basic cat / customer service does not know how to solve my problem. I get error 205. Support to that solution has been disable the antivirus. That did not work. The next idea was try another internet connection. Does not work either. Of course, all this could be avoided if there was more than one method of download available. Maybe one that installed CC how the rest of the planet is installed.

    Despite everything, I need someone who can help me with this. I pay Adobe on a monthly basis after all.

    Please see the links below.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • I have the Macbook pro (OS EL capitan). My dongle for internet connection does not work. Any solution?

    I have a MacPro 13 inch Keratina OS EL Capitan 10.11.5. I have the Dongle of Auntie Photon for Internet connectivity. Auntie Photon software is downloaded but it shows message 'Photon is not connected.

    Any solution?

    Thank you

    See: https://www.tatadocomo.com/en-in/list-of-customer-care

  • My internet connection does not work. IP Config (ipconfig) is in error.

    My internet does not work. When I type IPCONFIG at the command prompt. It gives the error follliwng:

    An internal error has occurred. The request is not supported.  Unable to query host name.

    Contact support services technical microsoft for more help.

    Additional information: host name of request impossible.

    Try to reinstall/network card upgrade for you device drivers

    Hope this will do the needfull

    Please let us know

  • On the Satellite A100-784 Internet connection does not work

    I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.

    It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?

    Thank you all in advance and my apologies for the newbie question.

    Each router must be configured and the right data ISP (internet service provider) must be inserted.

    -Don't configure you the router?
    -How about the TCP/IP settings? All the settings are set to automatic?
    -How about firewalls? Have you used one or you turn it?
    -Have you tested different browsers?

    Please check the points above.

  • Internet connection does not work after the virus scan

    Hello

    I recently did a virus with Adaware scan and now I can't connect to the internet. I guess that Adaware muts have deleted or changed a file that prevents me to connect. When I try to access Internet, french IE or Opera, screen pops up saying that it cannot access the internet. On the connection to the Local network, the State says "network address will acquire necessary", but this indefinitely and never connects.

    Thanks for any help on this. At this moment I am my work computer internet access.

    Niall O'Connor

    Ad-Aware is not an antivirus application, so chances are that the computer is still infected.

  • IPv6 internet connection does not, ipv6 does not.

    Exactly what the title says, how do I fix? Please?

    I tried

    netsh winsock reset catalog
    netsh int ipv6 reset reset.log

    Restarted my laptop did not work.

    I don't have any antivirus installed. I have the windows firewall on.

    Hello

    To help you solve this problem, please follow the steps below:

    Method 1: use the troubleshooting of the network connection.

    1. Open Control Panel and then search for Troubleshooting.
    2. Click network and Internet.
    3. Click Connections Internet and follow the instructions on the screen.

    Method 2: we invite you to update your network driver and reset your network profile. After resetting your network profile reconfigure the connection, restart the computer.

    1. Click on Search.
    2. Network type. Select the network connection settings.
    3. Click on Manage networks known.
    4. Click the networks save in your computer.
    5. Click on forget.

    Let us know how it goes.

  • Wireless Internet connection does NOT work.

    My laptop is a:

    HP - G60 Notebook PC F .3C

    Product #: NW148UA #ABA

    Serial No.: {removed privacy}

    Hello

    You have a few options in my opinion please try these steps can help you solve your problem.

    (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

    (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

    (3) Please update the Bios driver & wireless from the HP website.

    (4) click on start search type Recovery Manager and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

    (5) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

    If you still have the same issue then you need to call HP tech support and get the replaced part.

  • Why my wifi connection does not work correctly?

    I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

    Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

    I came across a thread that told me to access prompt as administrator and type in this

    netish int ip reset

    I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

    ipconfig/flushdns

    now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

    Hi Veronica,.

    Thanks for the reply.

    Sorry to hear about the inconvenience caused.

    According to my understanding, you are having trouble with internet connectivity.

    You upgrade windows or what was the first operating system installed on the computer?

    This problem is mainly due to drivers get damaged.

    To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

    Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

    https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

    To download the latest drivers from the computer manufacturer site, see the link below:

    http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

    Hope this information helps, for assistance please answer.

  • Satellite C70-B-306 - local network connection does not work

    Hello

    I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
    I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

    It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
    What can I do? I have the laptop 1 week.

    René

    Hello

    What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

    Open Device Manager and check if the LAN CSA is listed and enabled correctly.

  • Satellite L20-264: wireless Internet access does not work

    I have a US Robotics router and a wireless laptop, I followed the instructions exactly in the manual to set up but the internet still does not work wireless but it works through the ethernet connection.

    Can someone help me please.
    If it helps my laptop model is 264 L20
    Thank you

    It is a pity that you describe your problem WLAN so little time and we don t know what you tried exactly and what results are there.

    For properly WLAN use two hardware components must be configured right - the router itself and laptop. It will be interesting to know on what are the instructions you wrote.

    Are you sure that your router is configured correctly?

  • Help, INternet explorer does not work after windows update

    One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
     
    After installation, my INternet explorer does not work.

    It reads:

    Windows could not access 'ie.redirect.hp.com '.
    Windows received an HTTP error message: 403 (refused).
    -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

    Then I click ok, and then try to go on 'www.google.com '.
    It still does not work, so I click on diagnose connection problems
    This time, it reads:

    Windows not found no problem with the network connection on this computer.

    You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
    Send information

    But when I send, I can not because I have Canon go online on my Internet Explore.
    When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

    I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

    I tried everything, but I can not do it by myself, so help please!

    @ceda only: See...

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Socket connection does not work with SIM network

    Hi all

    I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

    Can someone tell me why socket connection does not work when I use the SIM card network.

    If anyone knows about internal or the following BlackBerry setting that also tell me

    "Option-> advanced-> TCP Option.

    Thank you

    Neeraj Chauhan

    Thanks Peter,.

    For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

    Thank you & best regards

    Neeraj Chauhan

  • Excite PRO 3G connection does not work after last update Android v4.3

    Hello

    I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

    After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

    My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

    Please help me.
    Thank you

    > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

    Go to mobile network settings and search again for the 3G network.
    I had a similar problem with my Android Smartphone and my o2 provider
    I started to search for new, so I chose the O2 again and then I could solve the problem.

    In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

Maybe you are looking for

  • Why E-mail stopped to relay my ISP?

    I had my server running beautifully for serval months now.  Last Friday, we noticed that some of the emails from our office did not reach their destination in a few minutes. Some would take hours and days. I could very well receive emails. We organiz

  • I can no longer connect to my email on Comcast with Thunderbird

    Comcast technical support checked settings are now correct but still can't connect. changed to recommended ports and SSL, but still does not work. Can connect with webmail on this computer and other devices. I see other people seem to have the same p

  • can I add a 16 GB of ram for my macbook pro 2010 Middle

    I was wondering if I could add 16 GB of ram for my MacBook Pro.  It is a mid-2010 model.

  • Closing the error dialog boxes

    I use Windows XP Professional and everytime I try to shut down my PC, it displays a dialog box error saying "this program is not responding" and the name of the program that appears is just "WMS". Whenever this happens, I have to leave the program my

  • Cisco IOS - how config static nat to NAT on the VPN

    Hello world I need help. I configured a VPN site-to site between two routers IOS. One of the routers already had a static NAT (172.16.100.1 inside to the public IP address), but this static NAT prevents remote VPN hosts access to the 172.16.100.1 hom