HP 255 G3: how to pass my processor

Similar Questions

• How confirm a dead processor and get a new one?

  I have a desktop HP bought three years ago. The specs are below.

  The processor seems to be dead. The hard drive is fine. Food seems to be OK, the Green LED on the back being activated

  The Office was beautiful, but he gave me sounds of fans inside. So I turned off, looked inside to look for trouble, then I turned on it, the screen remained empty forever. The motherboard seems to show signs of life because the light on the Ethernet Jack is on. I open the heatsink and removed the processor and clean dust and residues, but the office is still dead.

  My questions are: how to confirm the processor died before ordering a new, and the second question is what processor to get? Is it a sold by Wal-Mart compatible? It uses the same socket

  http://www.Walmart.com/IP/AMD-Athlon-II-X2-dual-core-260-3.2GHz-processor/15746974

  ------------------------------ desktop specs ------------------------------

  HP Pavilion p6247c-b desktop PC

  Base processor
  Athlon ll X 4 620 (P) 2.6 GHz (95W)
  •4000 MHz HyperTransport 3.0
  •Socket AM3

  Chipset
  GeForce 9100

  Motherboard
  •The: Pegatron
  •Motherboard name: M2N78 - LA
  •HP/Compaq motherboard name: Violet-GL8E

  Memory
  6 GB installed memory
  Maximum allowed 16 GB (4 x 4 GB) (64-bit operating system)
  Speed supported PC2-6400 MB/s
  Pin type 240, DDR2

  The problem was a defective cable connecting the hard drive to the SATA port on the motherboard. I swapped the cables with CD-ROM drive and it works now.

• How to pass a string to a vi from a dll?

  I have a DLL that generates errors in the log. How can I display my Panel before these errors? In other words, how to pass a string from a DLL to a vi using the library to call feature?

  Thank you

  Diego

  The DLL actually allocates memory for the string? If this is the case, there should be another function to free the memory. Otherwise you won't be able to do the deallocation of LabVIEW, which means you would have to write a wrapper DLL. If you do not have the deallocation, then you will have a memory leak.

  Are you sure that the DLL is not simply wait for a buffer "of a proper size? In this case, you can simply create a U8 in LabVIEW to a size that is larger that the largest string that you expect to get.

• How to pass the Visa Resource Name parameter to labview dll in labwindows/cvi

  Hello world

  I build a dll of labview, the prototype is: double getchannelpower (double f, uintptr_t * VISAResourceName);

  I don't know how to go from VISAResourceName to this function.

  Is it related to the ViPSession paremeter in function viOpen(REES ViSession, rn ViRsrc, ViAccessMode am, ViUInt32 ti,ViPSession vi)?

  BRs,

  lotusky

  Hey, guys:

  I figured out how to pass the parameter.

  In labview, you must replace the control of visa with string control. In this way, the generated dll function at the entrance of the string type.

  I hope this will help others!

  lotusky

• How to pass data (more effective) autour

  Hello
  I wonder how to pass around large data around across the application.

  For example:
  1 data or data of my analog channels
  (I have a lot of screws that will process these data of waveform)
  Is it not wise to spend around analog continuous data?

  2. What if you want to process digital data?
  (I must treat these unique bits in several screws, for example,)
  security door bit, stop bit of emergency, must be treated as higher priority than screw
  input 1, selector, etc.).

  Or you have any suggestions, what type of data I should use. I have a
  global impression screw actually write these digital data in a file, then
  These files are passed around?

  3. is there a mechanism that pass around data in memory, NOT in the files?

  By far, the way the more effiecient to pass data autour is a thread.  If you are really worried about memory, then you must avoid the connection of the wire that he holds the large amount of data.  This could mean making your processes in series (one at a time) passing the data of one Subvi to another via the controls and indicators and the connector pane.

• How to pass the session IMAQ to the Subvi

  Hello

  My experience with LabView is neither very good nor extended. I am a scientist and I'm with IMAQ data acquisition. My current problem is that the people who wrote the script is modular, versatile, or clear initially structured. So I try to reduce the ridiculous number of tests in a simple flowchart to a level that people can actually understand it... and to make the more versatile script for future experiments.

  I'm introducing quite a few subVIs to be executed repeatedly. However, I can't know how to pass the IMAQ session on the Subvi. I constantly get the error messages. In this case, I want to acquire images with OIDE_CollectFrame.vi controlled by OIDE_TrialPhaseCollect.vi. I couldn't understand how to assign the refnum IMAQ session class, either.

  It is probably a newbie question, but usually I program with LabView.

  Dennis

  
  

• HOW TO PASS THE HEX OF THE MAIN PROGRAM VI ENUM, SUB VI ENUM VALUE

  HOW TO PASS THE HEX OF THE MAIN PROGRAM VI ENUM, SUB VI ENUM VALUE.

  HOW THEN IT WILL CHOOSE CORRECT ON SUB VI HEXAGONAL ENUM VALUES.

  Enum values are strings, you must first convert the hexadecimal value to a hexadecimal value chain represtation.

  Then that convert from the enum.

  

• How to passing arguments to an exe

  Hai Everbody

  I know that LabVIEW has the ability to call an exe file created in different platform, can I know how to pass arguments to the special exe (which is located in another platform) via LabVIEW... I wish someone could help me out of this

  Thanks for your answers, I found the solution... As the exe is in .net, I used the syntax for the command line arguments in .net...

• How to pass a string of e-mail with attachments?

  How to pass a string of e-mail with attachments? I received an email and had answers in both directions. I try now to send the original of the attachments on the first 2 emails. How do I do that? My receiptiant says that he gets the e-mail message but has no attachments?

  You don't mention what you use for e-mail.
   
  You can either transfer the messages all attachments, or save attachments and then attach them to a new message.

• Upgrade of RAM i7 540 how fast can the processor actually use

  I just got a 540 and I want to know how fast RAM i7 processor is able to use to my advantage. The BIOS can deal with setting parameters at a higher speed of RAM?

  Second question, the system tolerates 1.3V RAM?

  Standards JEDEC and Intel Haswell only supports 1600 MHz CL11 at 1.35v

  You can install RAM more fast (probably up to 1866 MHz depending on availability), but it might speed up to 1600 MHz.

  Note that faster RAM installation also slightly increases the temperature of the CPU.

  Don't lose sleep on it, you hardly notice the difference anyway.

  Before I forget, do not install any RAM with a voltage higher than 1.35v.

• I need to know how to determine my processor architecture or know what it is

  I looked around the site for the answer to my question 'how do I determine processor architecture?', but all I got is how to determine the weather its 64-bit or 32-bit. I need to know if my processor is AMD or i386

  I have an Intel Celeron proccessor under Windows 7 Home Premium... Can you tell me, on this basis, weather or not im AMD or i386 or tell me how to determine

  How will I know if my computer is running 32-bit or a 64-bit version of Windows?

  To find out if your computer is running a 32-bit version or 64-bit Windows Windows 7 or Windows Vista, follow these steps:

  1. System opened by clicking on the button start , right click on computer and then click Properties.

  2. Under system, you can view the system type.

  How do I know if my computer can run a 64-bit version of Windows?

  To run a 64-bit version of Windows, your computer must have a processor 64-bit capable. To see if your processor is 64-bit capable windows 7 or Windows Vista, follow these steps:

  1. Open data on the performance and tools by clicking on the button start , and then clicking Control Panel. In the search box, type data and performance tools, and then, in the list of results, clickPerformance information and tools.

  2. Do one of the following:

     • In Windows 7, click view and print detailed performance and system information.

     • In Windows Vista, click view and print details.

  3. In the section system, you can see what type of operating system you are currently running underSystem type, and whether or not you can run a 64-bit of Windows 64-bit version. (If your computer is already running a 64 - bit windows version, you won't see 64 - bit capable list).

  
  You can also run CPU - Z [1] to determine if your processor is 64-bit capable.

  André

  [1] http://www.cpuid.com/softwares/cpu-z.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to pass the value?

  Hello.. I'm creating an application of streaming, in which I have a list field in a screen like this...

  1

  --------

  2

  --------

  3

  --------

  and when the item 1 is selected means a url must be passed to the video player...

  I created the list field screen in a package and a video player in other package... but I do not know how to pass the value of the field from the list to the player... Help, please... its URGENT...

  You can get the index selected by the listname.getSelectedIndex () method and compare that value with Vector data (data store URL) .that you will give a correct value from the URL and pass it.

• How to pass an argument of javascript to java extension

  Hello, I have an application running with a Java Extension.

  For the course of time, I only call some java extension methods (ScriptableFunction, but now, I have to pass the variable javascript (arguments) to the extension.

  I call a method with:

  // In: public final class MyCamera extends ScriptableFunction
  
  public Object getField(String name) {
  
      if (name.equals("getImage")) {
       return callGestorCamera.pushUICameraSnapshot();
      } 
  
      return new String("do nothing");
  }
  

  and javascript :

  function getImage() {
      var name = mycamera.camera.getImage;
      return name;
  }
  

  and run correctly.

  But now I have to pass one argument, as some URL, and I don't know how to do.

  I try to move the handful of Java class to Javascript, something like this:

  // In: public final class MyCamera extends ScriptableFunction
  
  public Object getField(String name) {
  
      if (name.equals("getImage")) {
       return callGestorCamera.pushUICameraSnapshot();
      } 
  
      if (name.equals("getObject")) {
       return callGestorCamera;
      }
  
      return new String("do nothing");
  }
  

  and javascript :

  function setUrl(url) {   var handle = mycamera.camera.getObject;        handle.setUrl(url);
  
      return true;}
  

  but is not running and try:

  mycamera.camera.getObject.setUrl(url);
  

  but does not work.

  What is the way?

  Thank you!

  I believe that the Extensions lab shows how to pass a parameter to a function... For example, he spends the duration of the vibration.

  http://NA.BlackBerry.com/eng/developers/devbetasoftware/Lab_Widget_Extension.zip

• Try to upgrade Windows 7 Edition Home Premium to professional, but I can't access the site to upgrade. How to pass?

  original title: Windows7 Professional Upgrade

  I just bought a new computer running Windows 7 Edition Home Premium with an upgrade to windows 7 Pro. I have the PIN # for the upgrade, but I can't get the site to come www.windows7.com/get key. How to pass?

  If your PIN does not work, try the following:
  1. check that the PIN has been entered correctly. PIN code is not case sensitive and is alpha-numeric.
  2. make sure that the PIN has not already been used to obtain a product key. A PIN can be used only once to get a product key. If the PIN has been used, you can connect to your account with your Windows Live ID (if you have it when the PIN has been entered) to access your product key or you can check your email for the confirmation e-mail, that you have received when the PIN has been consumed to access your product key.
  3 contact support if you have any questions: www.windows7.com/getkeysupport.

• How to pass the vcs - e License? A server to Server B.

  Hello

  my company has a vcs test server.  and we buy the new server.

  I need to spend vcs again server.   I backup and deploy using the vmware ovf file.

  deploy the success. but new server vcs poster license error.

  How to pass the license of vcs?

  Of his assignment, it is not necessary to use both servers at the same time.

  If I see, if you move the virtual computer between two servers and you used local storage the

  Serial number will change...

  Please remember useful frequency responses and identify useful or correct answers.