HP 2600n prints with a blue vertical line on the sides

Similar Questions

• Blue vertical line on the screen of the Qosmio G20

  A few minutes ago, I was surfing the web and from nowhere share an apperead to the blue vertical line on the screen.
  A blue vertical line near the middle of the screen and crosses the screen all the up toward the bottom.

  If I'm looking at a white background, the line is undetectable, but if it is colored, it comes right thru.

  Please don't tell me they are dead... hoooo pixels... I am now, life away from any toshiba repair shop and I get a guarantee...
  I think that I bought 3 years ago. Need urgent help

  Hey Susana

  I wouldn't say it s a lack of dead pixel, but to me, it looks like a more serious problem.
  It looks like a malfunction of the graphics card. But to be sure, you should try to connect the external monitor to the computer and check if the same vertical line will appear on the second screen.

  If you're going to see the same line on the external monitor, then I assume that the question of the vertical blue line might be linked to the GPU fault.
  This could be the case value because the chip graphic card cannot be replaced. You need to replace the whole motherboard :(

  So, as you see it s not easy to solve this problem and I really recommend to contact a technician who has more experience with these laptop problems.

  Good luck

• Blue vertical line on the screen

  Hello

  After a day of use, I have a blue vertical line on the screen. Defective LCD screen? Tried to reapply the latest firmware, but that doesn't change anything. Other things to try before a sent an RMA?

  

  I dunno if Newegg "corresponds to" Amazon product replacement policy is defective products: Amazon will cover the shipping costs for the return (via a pre-paid return label he sends you) but also send a replacement free of charge.  You might want to check with Newegg, if your Clip has been purchased recently.

  Apart from Newegg, if you need to take advantage of the SanDisk warranty directly with her, SanDisk (at least in the United States) covers shipping as well as for the replacement that is sent back.

  http://www.SanDisk.com/about-SanDisk/contact-us?utm_source=contactus&utm_medium=hyperlink&utm_campai...

• How correctly to convert to SVG in illustrator. When I save as svg, I get a frame with a single vertical line in the box? Thank you

  any help would be greatly appreciated.

  These articles will help you:

  http://helpx.Adobe.com/Muse/using/SVG.html

  https://helpx.Adobe.com/Muse/how-to/add-SVG-graphics.html

  Thank you

  Sanjit

• Why am I a thin blue vertical line on screen?

  Why am I a thin blue vertical line on the screen of my PrecisionM4800

  .? Is there problem with Video card?

  Hello Karthi.SK44,

  Thanks for writing on the Dell Community Forum.

  I suggest you to test the display on the external monitor to confirm if the screen is bad on external monitor while the motherboard is faulty.

  Then run LCD BIST (built-in self-test) on the system to shut down the system, then press and hold the power button. Then put on the system where, in solid colors will be visible on the system. If the line is visible during the test, then the screen is defective.

  If these two tests pass and then make sure that the system ins safe mode with network to eliminate the operating system.

  I hope this helps. If there are questions more respond to this message.

  Nice day!

  Sincere greetings,

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• HP5530: Grainy prints when printing photos on HP5530. Also pink vertical lines on each side of the picture.

  When you print pictures from a SD card on advanced paper HP using HP instant ink pictures are grainy and present pink vertical lines on each side of the picture.

  Have tried Clean Printhead twice, own smear ink and printer to align. A photo then came out fine, but then returned to the problems of the original.

  Can anyone suggest how should I proceed to try to remedy this problem, please?

  Hey @Alastair2,

  Welcome to the Forums of HP Support!

  I see that you have problems with the print quality when printing photos. I also see that you are enrolled in the instant the ink program. As a subscriber to instant ink, for that matter, that I suggest contacting HP Cloud Services directly. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to reach a resolution with the support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Blue vertical line appear on the screen of the series M Satellite

  I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

  Hello

  If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• CP2020 leaving 2 vertical lines on the printed pages

  Our CP2020 has began to leave the two vertical lines to the bottom of every printed page - more print on the page, the more visible the lines. I printed a test page and join to view.

  We don't have any kind of warranty or service contract but I am the IT Manager and can do an interview or anything else that is necessary, I don't know what needs to be done to solve this problem. Thank you!!

  Replace the black toner cartridge if lines are only in black.

• Get a blue vertical line on my laptop

  I have a blue vertical line on my laptop. I can't even take a screenshot of that (in the screenshot is not there). I tried to update my driver too but it shows that you have the latest version of your display driver. Please help me...

  Depending on how "mechanical" you're - you could try the case remove and clean then reconnect the ribbon cable from the screen. It's actually not that hard to do and you can probably Google instructions specific to your model of laptop.

  I hope this helps.

• HP c4480 prints with a blue tinge in photos

  Problem of Strang. This printer prints several images very well.  Then started printing with a blue tint.  I installed new color and black ink cartridges with no improvement.  I used the suggestions of the HP user as cleaning the print heads and alignig all to nothing does not. I tried to print using different programs all without help.  Any suggestions?-ddh48183

  Hi again,

  Glad that it worked for you! Good choice of printer, sleek and stylish huh?

  Be sure to visit the new forums if you need help or you can contact HP Technical Support.

  Good impression!

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• I'm getting a vertical line in the middle of the page when I use the ADF on my Officejet Pro 8500 a but

  HP Officejet Pro 8500

  Windows XP

  No error message

  No changes to the system

  Scan using the ADF puts a vertical line in the middle of the scanned page.  This does not happen when I scan from the flat screen

  Brian, this is going to be a pretty easy fix. What you're going to need to get is a lint cloth (as a microfibre cloth or a filter coffee) and get just a wet touch. Then, open the top of your printer to reveal the glass. There are two sections, one large, and that is a thin strip of glass on the left side. If the line makes its appearance in the ADF scans/copies only - clean this thin section with a moist, lint cloth.

  This should help you!

  More information here: https://www.youtube.com/watch?v=SPdwUKnrDgM

  Let me know and have a great day!