HP 2709M 27 "monitor - Webcam issue

Similar Questions

• Monitor the issue after Windows update

  I installed the Windows updates today, and after installing and restarting, the saturation of the color on my monitor is out of line. There is intense color saturation and it made all my files photo as well.

  Running windows 7 and a HP w2338h monitor.

  Thanks for any help on this

  fifthboss,
  You should look through the updates installed to see if there was an update to the video card.  I would then check with the manufacturer of your video card for the latest driver.  If you just updated to the most recent and feel it affected the color then you can restore the previous driver.  Then you can contact the manufacturer of the video card on the driver and they know the issue and see if they are still aware and have a fix. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sony vaio vgn cr220e webcam issues

  Update to Windows 7 caused my webcam to stop working.  I think the problem is double.  (1) I don't have the original software.  (2) software can not detect the webcam.

  If I go to Device Manager it says my driver is up to date and I have a composite USB device with a pic of a camera.  When I download the software, it tries to bind to the cam and does not work.  Even google video chat will not recognize the camera.  The original software from sony on the site of sony vaio is still formatted for Vista I think what does not help either.

  Any suggestions are appreciated.

  Hi burner_na,
   
  Method 1. Drivers compatibility mode installation:
  If there are no drivers for Windows 7 64-bit, download Windows Vista drivers and install Windows Vista SP 2 compatibility mode.
   
  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions

  For more help see the following:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2.
  If the steps above do not help to resolve the issue. I recommend you contact sony support to even that he might need a software to install on your computer to make the webcam work
  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Several X201T problems solved - sleep problems, lock issues, multiple monitors / dock issues

  Hi, guys.

  Immediately after obtaining my Tablet last summer, I installed Win 7 Enterprise, our company holds a license for a microsoft SA customer.  Win 7 Enterprise has all the features of Ultimate edition, including Bitlocker, I needed.  I even restored the machine using discs I got from our Lenovo account manager and had the same problems as the image of the company.  My Tablet has the touch screen feature.

  I had the following problems with the Tablet, which are now resolved:

  Trackpad spoil randomly

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-trackpad-issues-randomly-tries-to...

  The tablet on the first day, there's a new trackpad.  The party has had more than 4 weeks to arrive, but it fixed the problem once it was replaced.  I tried 1 billion software solutions (different drivers, settings, etc...) and blew a lot of time, so if you have this problem, get your replaced trackpad.

  External monitor did not work with docking station

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-multi-monitor-issue-with-ultrabas...
  

  The solution was to use an adapter displayport to DVI to my Dell 24 "monitor.  The Displayport takes a long time to synchronize with the monitor that he thinks it isn't getting a signal, and the laptop turns off the display shortly after having tried to activate it.  In this case most of the time.  With the help of an adapter DVI worked very well.  I found myself propping my tablet in portrait mode with a cheap portable stand in a big box office supply store so I can have the OneNote upward on the tablet screen throughout the day.

  The final two problems have been solved with the application of a patch of Windows:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74813

  Thanks RP68

  Laptop won't sleep or shut

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-won-t-shut-down-hard-disk-light-f...

  At the end of each computer session, I had to shut down windows with one hand on the power button.  It was extremely disruptive.

  Laptop won't lock, will not close the session cannot bring up the Ctrl-Alt-Del screen

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-tablet-can-t-lock-the-computer-or...

  It was awful.  As I sometimes ran programs in respect of the whole of the high network privileges and have a sensitive Inbox, it meant that I had to basically hold the power to stop the machine when I go to the toilet.

  Why no system update?

  Lenovo - the fact that this fix does not appear as an update required in Lenovo System Update caused me a lot of grief.  If you have a technical reason why it was available on the site, I would like to hear about it.  The case, please make your tablet customers a favor and put this in the system update.  There is absolutely no doubt in my mind that the fix has solved all of my most serious problems, despite a description of Microsoft that doesn't seem to match the symptoms.

  I'm a happy guy now that all my stuff works.  A bad computer can really make your life difficult.

  @deathbots,

  Thanks for sharing the steps you have taken to solve the problem, I will drop a comment to the TVSU on this topic to see if it is possible to implement this go ahead.

  Thanks again
  JMT

• Satellite L670D-11 t (PSK3NE-00W001GR) - Webcam issue

  I have a problem with my Web Cam. I had problems with Windows 7 that was installed before then I installed Windows 7 Ultimate and now my cam does not work. I downloaded the driver from the toshiba cam but my cam does not work.

  What can I do?

  Hey Buddy,

  Can you post a little more information? Webcam work doesn t say anything and it might be
  You get an error message?
  The picture is all black?

  You should check if the webcam is properly recognized in Device Manager, and before installing a new driver webcam are of course the old version is removed from the control panel > uninstall a program.

  Check this box!

• Monitor external issues Elitebook 820 G1

  Hello

  I have problems to connect to an external monitor, Dell 2709W, for my G1 of 820 Elitebook.

  I have an Intel HD 4400 graphics solution. The monitor says:

  Out of range signal

  Cannot display this video mode

  change the input of the computer screen 1920 x 1200 at 60 Hz.

  I use a Display Port cable for the connection.

  All the ideas I maight operate?

  My OS is Win 8.1 64bits

  I used the HP support assistant to update all hardware drivers.

  Nicolai

  Hello @nicolaimp ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• double of Acer predator G3620 monitors the issue

  So iv got myself another monitor and iv had a problem like iv got my main monitor with a mini HDMI cable setup but there is no second mini HDMI or a normal HDMI and there is a VGA cable spot which is blocked... anyone got any ideas how I can connect my second monitor?

  Can you send me a private message with your serial number I can't tell the exact specifications of your system. The G3620 different models have different video output options.

• Monitor LCD issues

  On my Dell Inspiron 5520, I had to replace my LCD screen due to the damage caused and bought and replaced by part number who gave and purchased from an outside source. Installed and all was good. Now no matter what I set the settings, everything is tiny, to connect to the internet. The graphics are blurred and so tiny. I set it to 150% only to see.  When I look at my device manager it just says generic pnp monitor

  I need help.

  Hi Tracey,

  1. What is the default DPI that you use on Windows 7?

  2 are you referring to external screen LCD monitor or laptop LCD?

  3. What is the resolution of the screen on the computer?

  There are several reasons why view on Windows 7 may not work correctly. Follow these methods and check if that helps:

  Method 1:

  Windows uses a technology called ClearType to create more readable on the screen text. On some monitors, you might want to turn ClearType on or off, or need to adjust it. For more information on the start-up and adjustment of ClearType, I suggest you to refer to these Microsoft article and check if it helps:

  Make the text easier to read using ClearType

  http://Windows.Microsoft.com/en-in/Windows7/make-text-easier-to-read-using-ClearType

  ClearType: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/ClearType-frequently-asked-questions

  Method 2:

  If the problem persists, try uninstalling and reinstalling the latest graphics card drivers and check if it helps:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-5520

  Also, see this Microsoft article and check if that helps:

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• Computer problems AlienWare x 51 ~ monitor the issue and 2000:0142.

  Hi, I hope it's in the good post.

  I have a few questions about my Alienware computer X 51 does not.

  I turned on my computer after completing a tutorial (I know the tutorial) in the tutorial that it asked to change certain settings, which I don't remember, unfortunately.

  When I disconnected all the wires and readded them and turned on the computer was not connected with the screen, yes the computer turns on, but the screens are not. I tried 2 computers (Vga and Hdmi), but they have no connection or something like that, the threads are * properly * in and screens are set right, so I think it is the computer itself

  They are to solve this problem of monitor anyway?.

  Also, I tried to fix the problem (s) on the computer. I did a test (when the screens were working) and it came up saying that I have a 2000:0142 question, any ideas why?

  When I start my computer, it starts but a little how freezes on the login screen, I have tried to do this at the start also, however, it came not again.

  Any ideas to solve this problem too?

  I hope that this is in the right place, and I hope to have some answers...

  Thank you.

  Send me a private message with your serial number, contact information and link to this topic so I can help you.

• Microsoft Webcam issue

  I was wondering if there is a way to get the 2000 LifeCam to take pictures with a timer? Or if there is an upgrade, I can download for this

  Hi twp123,

  I suggest that you read the manual of the unit to learn more about its features and functionality.

  For more assistance, please contact Microsoft hardware support.

  http://www.Microsoft.com/hardware/support/default.mspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor synchronization issue with sonicwall tz210.

  Dear all, we have just configured Analyzer 8.0 in windows 7 pro 64 - bit o/s. I have a UTM of sonicwall TZ210. I've added in the section Firewall Analyzer. be synchronized successfully first time. but after sometimes the ip address of the firewall are empty. firmware SonicWALL's SonicOS Enhanced 5.9.1.1 - 39o. I tried several times.

  You go on MySonicWALL.com and go to free downloads then GMS/Analyzer and then download hotfix 161814. This hotfix resolves this problem.

  Thank you
  Ben D.
  #Iwork4Dell

• Satellite L350D - Webcam not working no-webcam must be restarted

  Hiya,

  first of all I don't know if there is a warranty issue, but I always seems to be getting in post offices closing at present.

  The new laptop sometimes seems to play and suggest the unrecognized USB device.
  In addition to that the webcam is not listed in the hardware setup.

  I tried to reinstall the webcam drivers, but although they install ok computer is actually the webcam, i.e. it is not listed in system devices and force Vista to get the camera does not lead to a bit of luck. (the adjacent microphone for the webcam works fine).
  Whenever I start the computer it tells me now that I need to restart the computer or the webcam.

  I'm running Vista 32 bit, the 250 d being a 1.9Athlon core duo with 2 GB of ram and certainly comes with a webcam (I don't seem to recall the little blue light come early during installation, but never again since).

  Is it worth getting a hard reinstall, even if Windows is normally good enough to pick up new equipment surely?
  I had a look on other webcam issues, but the drivers are not good because I can't really do the webcam anything.
  I've been on the guarantee page but you are trying to enter the serial No. He said: there is no.

  Any ideas?

  Thank you, Jason

  * Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.
  * Install the Service Pack 1 of Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
  * Update your e-mail software (MSN/Yahoo Messenger, etc...)
  * If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.
  * Try to close the bar Assistant camera on the left side of the office.
  * To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• SP2309W Webcam does not work

  Hello

  Dell SP2309W webcam doesn't seem to work. It is connected to the HP laptop. In Device Manager, I can see the Monitor webcam installed under imaging devices. The upstream USB cable is connected to the monitor of the docking station. Could someone help with this problem. Thank you. Smitha

  Please ignore my previous post. It works perfectly with one of the ports of the laptop. Thank you very much. Sorry for the confusion.

• Monitoring of virtual machines running on the UCS blades

  We are in the process of migration of servers HP rack to Cisco UCS blades. I have 4 blades UCS running ESXi and dΘmarrez from SAN. We have configured in HP SIM HP servers to monitor hardware issues and the status of the VM. Now Let's watch the material of the UCS in UCS Manager, but I still need to monitor the status of virtual machines. I looked at existing Solarwinds NPM we have all our ESXi HP servers to Solarwinds. What I've discovered, is that we cannot add the individual to NPM ESXi blades, because we can not configure SNMP (or we).

  Which means that migrate us from HP servers for UCS blades, we lose the ability to monitor the State of the CPU and VM.

  How people monitor their virtual machines in an environment of UCS?

  Thank you.

  We monitor our UCS ESXi 5 with SNMP hosts and use Solarwinds NPM.  It works well.  These are the commands that we send through our VMA (free VMware) server to a new host.

  vicfg-snmp - root server - username - password it

  vicfg-snmp - root server - username - password you @162.

  vicfg-snmp - root server - username - password e

  There's probably a way to do it on the console of the host, but I don't know what it could be.