HP 350 G1: Intel RAID driver but...

Similar Questions

• ESXi 5.0 U1 could be installed on a SATA drive, but can't the SATA RAID

  This is the case:
  My physical server includes the Intel series E5-2600, Intel C600 (A for SATA) chipsets.
  In the VMware ESXi 5.0 Update 1 Release Notes, I find his support for chipsets Intel C600 and E5-2600.
  So I want to confirm if ESXi 5.0 U1 could be installed in my machine.
  In my test, ESXi 5.0 U1 can be installed with a SATA, but not SATA RAID drive. (Installed by CD)
  What's wrong?
  Waiting for your help.
  Thank you!

  Another feature that is missing in ESXi is caching block... So if you buy a hardware RAID card choose one with a battery to use the cache policy writing and write I/O faster.

• Adding 3rd drive but not RAID?

  I have a TS200V with 2 x 250 GB drives in a RAID configuration. Can I add a separate 500 GB drive, but NOT add it to the controiller raid itself? As a standalone player? I'm new to RAID not too sure if this is possible. Or the question of whether the TS200V has same slots for additional disks.

  Thank you.

  John

  Hello

  Server does support RAID 0/1 only.

  There are instead of using the 3rd HARD drive inside.

  Means to refer to the knowledge base and in this topic

  http://forums.Lenovo.com/T5/ThinkServer-towers-knowledge/TS200v-RAID-5-controller-card/Ta-p/271321

• What Windows 7 64-bit installation crashes with BSOD when you ask to Raid driver

  Original title: HP dv7 7008 own ssd install question.

  While he was trying to do a clean install of Windows 7 64 bit Ultimate built in 32gig ssd blocks on a 7B BSOD.  Tried to re - install the driver iastor.sys, intel RAID ultilty without success.

  I tried to restore to the factory but can't.  Can boot from image of Windows 7 on USB and try to re - install.  Installation asks for the driver that I provided and about 30 seconds later it BSOD.

  HP uses a 32gig like Accelerator HD SSD where the problem with the iastor.sys.  There is no option in the BIOS to what whatever relevant and I am at a loss.

  Don't want to send it back under warranty.

  Turned out to be a bad SSD returned and replaced with new ones.  Just glad to know I wasn't losing my mind.

• Intel RAID Option ROM

  I tried to get ESXi 3.5 update 4 is installed on my Dell Dimersion 8400 and have encountered a problem with my RAID controller.

  A few statistics:

  Chipset: Intel 925 X

  RAID controller: 82801FR (ICH6R)

  Hard drives: 1 TB 2xSATA

  Given that ESX is not taken in the way Windows RAID support not I changed the setting in the BIOS to explicitly enable RAID (as opposed to deduction if there is a signature).  This allowed me to enter the Intel Application Acceleration RAID ROM (v4.0) option where I could create a RAID1 array with my hard drives.

  After you have created the RAID1 array installation ESX failed (he had worked without any active RAID).  I've updated the BIOS and that seems to have fixed (no more panic: no bootable sector or similar error messages).

  However, I don't know if my RAID array does not work correctly.  ESX shows only a single default data store, but it does not find the second hard drive.  My thought was that with material creating a table that ESX would only see a 'hard drive '.  The truth in my opinion?

  Anyone has any ideas on how to test the table?  I guess trying to start individually on each disc?

  Make me more comfortable, it's info pages Intel Application Acceleration RAID on intel.com explicitly that it does not support a list of Linux/Unix O / its.

  I guess I'm looking for ideas or advice on the best configuration for ESX RAID1 with my Intel chipset.  Perhaps a RAID PCI controller?  Any advice is welcome.

  Almost all Intel RAID chipsets are really just a software raid implemented in the driver.  ESX sees these as separate drives.

  No really no way around it.

  -Matt

  VCP, vExpert, Unix Geek

• Tecra S3 - need SATA / RAID driver for installing Windows XP Home edition

  I'm doing a new installation of windows xp on a Toshiba Tecra S3 model PTS30E-0DT03FDU
  Who knows where to find the RAID driver to load when you start the installation of xp?

  This model no longer appears in the driver download section.

  Of course, it is listed by download, but the older models are listed in the ARCHIVES.

  Please visit the download page for Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp - once again and the slot type of product choose Archive.

  For Windows XP Home edition, you will find RAID driver for download.
  Can find you it?

• HP Compaq 8200 Elite: HP Compaq 8200 Elite - Raid driver

  I have configured my two 250 GB SSD in raid 0, but I can't seem to install Windows on raid 500 GB without driver. I tried three or four drivers already without success. May be it someone please redirect me to the correct driver?

  Off eSATA, started right without a driver. Guess it was conflicted.

• Satellite L500 - cannot install the Intel video driver

  Ok
  complete failure of the hard drive, no recovery cd was created, reloaded windows 7, looked up and downloaded the drivers from Toshiba, BUT there are only two video drivers listed, amd and Intel, both marked "for model only supported" its an Intel machine so I tried the Intel driver but it doesn't install, it just closes which I believe if the corresponding material is not found is the default action for these drivers.

  But I'm stuck with 'standard VGA graphics adapt' all other drivers loaded perfectly, (I installed the driver from chipset Intel first and rebooted, so it should be ok but it s not)

  Any ideas?

  Rgds
  SYB

  What Satellite L500 you exactly (L500-xxx)?
  Do you use 32 or 64 bit OS?

• Need Tecra S3 Raid driver for VISTA

  I "find many drivers to install vista on TECRA S3, but not the DIVER of RAID. It is essential to install vista. Can anyone help?
  Thanks Mike

  Perhaps Vista has not the RAID driver? Installing XP on a newer machine, I mean that you need to load some drivers, but not under Vista.

  Did you already installed Vista on your computer?

  See you soon

• Qosmio G30-175 - where to find RAID driver for Windows 7?

  I have a Toshiba Qosmio G30-175 and I need raid driver so I can install Windows 7. My operating system is XP and on Toshiba-home page, I can't find the driver.
  Can Enyboby please?

  Kenneth

  Hello!

  Have you ever tried the Vista driver? If this isn't the case, you need to test, because most of the Vista drivers are also work on Windows 7.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I hope it will work for you, but you can give us feedback on this subject. I think it could be interesting to other people, too. ;)

  Good bye

• Satellite C660 Intel Display Driver 8.15.10.2353 download Stop to 50%

  I wanted to download Satellite C660 Intel Display Driver 8.15.10.2353 but it always stop at 40% or 50% Toshiba cant even take care of its download pages? Anyway did someone knows how to get it or maybe change laptop or something like that to another brand @_ @.

  Download link do not work for 64 bit

  http://www.Toshiba.co.UK/innovation/...untry=8&page=2

  Hello

  I tested your link and I downloaded the driver successfully.
  

• Satellite L50-A01Q: where to find the latest Intel graphics driver

  I brought a Blu - Ray external drive and tested to see if I could play blurays but the Intel graphics driver is outdated.

  I downloaded the new driver from Intel, but he could not install.
  He said I had to download the driver of my manufacturer.

  But the new driver is not available from Toshiba?
  There, because I can not play blurays.

  > I downloaded the new driver from Intel, but he could not install.
  > He said I had to download the driver of my manufacturer.

  Of course, you can install the Intel driver downloaded from Intel page.
  You must download the zip package where only files are placed in the record of the driver.
  Then you have to unpack this package, then go to Device Manager and update the driver by using the Advanced installation procedure. This will allow you to point to the folder of the Intel driver you have unpacked (desktop?)

  This procedure worked for me

• Intel Graphics Driver crashes when you start Photoshop CS6 on Vaio SVF15319SNB

  I bought a Sony Vaio SVF15319SNB and it asked me to upgrade to 8.1 Windows for free.

  After this update, I've updated all the drivers required Sony Vaio update and after you have installed Adobe Creative Suite 6 to use this product.

  Unfortunately, this is where the problem started. Not only runs Photoshop CS6 extremely slow and lag on my machine (which has a decent configuration and 4 GB of ram to work properly), but almost every time I boot up Photoshop, my driver intel graphics crashes and I get a message saying "Intel Graphics Driver for Windows 8 (R) stopped working and have been recovered" or something like that. This post, my Photoshop has erradicaly. When I do get this message, Photoshop works very well except be lag, so I guess that which directly has something to do with the compatibility of the Intel with Photoshop graphics driver.

  I tried the Intel graphics driver update but discovered that even if an update is available on the Intel website, Sony has still not launched a support for Vaio version.

  When I was going through the Event Viewer logs, I found that there are two or three events (warnings) that are generated by the system which seems scary as ideally a new machine should not generate too many warnings.

  Any help on this would be appreciated.

  Dhaine

  In the meantime a solution from Sony or other members, I could do some troubleshooting and find the solution to this weird problem on my own.

  Weird that no one else has raised a similar question!

  When playing online, I found that it is a typical problem with Photoshop CS6 in machines having 2 graphics cards (1 built-in to the motherboard, 1 adapter dedicated graphics - nvidia in my case). The default configuration for machines with double adapter is to automatically select the best card for an application.

  When Photoshop CS6 is trying to load, it tries to select the graphics card tailored to this effect by running sniffer_gpu.exe. It is this module crahses and in turn is also crushing Intel graphics driver. Due to this accident, Photoshop freezes when opening any file (regardless of the size of the file or its format).

  Solution that has been open you view the settings of the adapter and the whole Photoshop CS6 and sniffer_gpu.exe for photoshop to use a graphic adapter special at all times - I have updated my nvidia card. That isn't it - crahses more or freezes and all is well!

  I hope this helps other troubled users also!

• Satellite U400 - conflict Dynadock DVI with Intel graphic driver

  I try to install the Dynadock DVI on my Satellite U400 / Vista 32 and after reboot, I continue to have the message Igfxext Module has stopped working.
  This is part of the Intel graphics driver.

  When I uninstall the Toshiba Software video Dock and drivers (exhibit Dynadock) components.
  I don't have the problem... but I can't use an external display connected to the Dynadock.

  I updated the Intel display drivers with no difference. Anyone who could help me on this one?

  Thanks in advance.

  Hello

  Check if you can update the graphics driver using the graphics driver for the Intel page.
  I have a U400 too and I installed the Intel driver from the Intel page.

  Welcome them

• Windows 7 can't detect the TOSHIBA Portege M400 RAID driver

  I put to level my M400 tablet from Windows XP to Windows 7.

  Questions of compatibility check out, all right. In research I realized I needed to upgrade the RAID driver to a version of Win7. So I downloaded which, from my external hard drive to install to Win7, and installing Win7 can't find it. I tried the same thing with a variant of Vista with no luck. Even through the installation on the hard drive itself, nothing happened. Impossible to get in the tio silent run command prompt, absolutely nothing. I'm back where I throw this computer out of my 4th story window.

  Any help please?

  Hello

  Where did you download the RAID driver?
  Please try to download the RAID driver on the Toshiba site directly. These drivers are pre-tested and should work on your laptop too.

  The older Portege M400 taken Windows 7 isn't supported so in the worst case, you can t use it.
  But normally the drivers should work on Vista so make sure you are using the correct driver.