HP 3500 Pro does not start on Windows

Similar Questions

• Windows 8 Pro does not start after windows update updates for April

  Hello

  Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

  The problems starts here; I am more able to start windows.

  It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

  I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

  I run system restore turned on so that the option is not valid for me.

  The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

  Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

  Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

  Disappointed that the "major updates" Microsoft kills my work machine.

  Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

  I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

  Installed all the updates one by one until it chrashed again installing the update mentioned above.

• the premier pro does not start in windows 10

  Hello

  I have just updated to windows install 10 with a cleaning. Now, I have a problem with the Premier Pro cs5.5. It does not start correctly.  instead of the projection of the screen it goes to an empty p [the age with the bar tools, then falls, disappears. I was wondering if I have to do a re-install or there may be an update to make it compatible to windows 10.

  In addition to the comments of John, a few people with a new Adobe DVA are struggling to get them to open in Win10 but found that by double-clicking the program file, the Properties section and choose "run as Administrator", they had to operate. That said... Win10 and a number of video applications are not on the excellent conditions in any universal sense.

  Neil

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• I was told that Acrobat 9 Pro does not work in Windows 10.

  I was told that Acrobat 9 Pro does not work in Windows 10.

  Hi glent16027488 ,

  It may or may not work, difficult to guess as its on an unsupported platform.

  We will recommend so you can use the application in a supported environment.

  Please refer to this article to learn more about the compatibility of the product:- Adobe Acrobat required configuration

  Kind regards

  Christian

• Tablet Dell coming 8 Pro does not start

  Hello

  The Tablet is only about a year. And I've kept it's safe and sound, no damages or drops. Nothing.

  But yesterday morning when I got it, he went to sea and no matter what I do, it does not start!

  I press and hold the start buttong. Nada. I even press the windows key or was desperate enough to press the volume even toggles!

  I thought that maybe the load isn't enough. So I let it charge overnight. Still nothing.

  He used to have a small problem before that sometimes he used to take a few minutes to actually boot (startup). But it's random and many times, it was when an update has been installed. But not always.

  But this time, he stayed off the coast and after more than 24 hours, does not illuminate!

  What should I do?

  Thank you

  I think just, I solved this problem. Make absolutely certain that you are using the supplied with your coming Pro USB wall wart, similar and ordinary phone chargers don't work reliably and sometimes not at all! There will be a sticker on the side of her windows. The Pro should need more energy than what is normally fed by normal phone chargers. I hope this helps!

  Also, I think that light orange/red momentary while that push the power button is actually an indicator of battery flat (as crazy as it sounds). These types of batteries are supposed to be completely empty as it will ruin their fast enough, so they are designed to power off with a few charges left to protect themselves to be completely discharged.

• Brother printer control center does not start in windows 8

  I just installed the software for my brother printers (MfC 885CW and MFC6490CW which as I understand it the Upgrade Advisor was compatible and should simply be reinstalled after the upgrade to Windows 8 pro does not work. The installation of the system software, but the brother control center will not appear on the screen so I run the scan.  I was on the site of the brother and two printers that report on integrated to windows printer drivers 8, but there is no mention of the software does not.  I tried compatibility mode, but in vain.  I'm starting to find that there are problems with Windows 8 when it comes to software which, even in compatibility mode is not working properly work perfectly under windows 7.

  Not for Windows 8, which is the point of all of this thread. (19/05/2013) he very specifically said currently the site Web from Brother Control Center, PaperPort, FaceFilter, etc. are not taken in charge for Windows 8.

• MacBook Pro does not start, the screen is pixelated.

  MacBook Pro (2011) running iOS later.

  Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

  Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

  Looking for ideas before making a trip to the Apple store.

  1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

  2. start in safe mode

  3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

  4. find the missing table inception report and post it please

  If your Mac will not turn on - Apple Support

• MacBook Pro does not start safe mode or recovery mode without start up

  I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  

• Windows Defender service does not start on Windows 7

  On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
  I can't remove Defender another upodate no longer works.

  Someone knows a solution?

  Hello

  Go to configuration-system board and security - administrative tools - services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

  In addition, you can read about trouble of Windows defender:

  http://support.Microsoft.com/kb/931849

• Satellite A300-259 does not start on windows

  Hello

  I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
  When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

  Is that what I can do before purchasing a toshiba recovery media disk?

  HARD drive recovery procedure

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Hi mate

  Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

  If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

• HP-P7-1026 b: Desktop does not start on Windows 10.

  Desktop computer does not start after reboot. Windows 10 message PREPARING AUTO REPAIR leads to next screen CHOOSE YOUR KEYBOARD LAYOUT and freezes / disables keyboard and mouse.

  Virus ISVProgramme can do so many things, do not rely on them. Also, why buy a new hard drive! Yours is still perfectly fine. I guess staples suggested, to avoid dupes. If you want a new hard drive. Your recovery disk should work as well as your old hard drive like new.
  Do not open e-mails that you are suspicious. One click and they own a computer.
  Good luck.

• MacBook Pro does not start. Tried a lot of things, but no luck. Ideas?

  MacBook Pro mid 2012 does not start. Getting the various screens of gray. When trying to make right boot, get flashing folder.

  Other things does not: recovery of OS X, without failure, verbose mode, Boot Manager, single-user mode. IRA to the re-establishment of the Internet, enter the password, stall (error - 2002F-).

  Tried to reset the memory NVRAM and SMC, but nothing.

  Tried with the new hard drive, but accurate results same with the old hard drive (I thought that the old hard drive can be damaged, so got a new one, but get the same results).

  Any ideas? Could go to the Apple service center, but closer to here where I am is 3 hours away.

  Should note that there are many attempts Mac starts up fine (by divine intervention I think), so saved all all on, but after computer use as usual for an hour (especially Internet browsing using Safari and Chrome), computer slowed to snail pace, so tried to restart but still got results above.

  Any help or ideas greatly appreciated. Thank you!

  Hi Sevensmallwoods:

  Replace the drive SATA cable. https://www.iFixit.com/store/Mac/MacBook-Pro-13-inch-unibody-mid-2012-hard-drive - Cable/IF163-041-1

  Here is a guide on how to replace it. the https://www.iFixit.com/Guide/MacBook+Pro+13-inch+unibody+Mid+2012+Hard+Drive+CAB + replacement/10379

  Here is a video to show you how it fails. https://www.YouTube.com/watch?v=Amg5w0rlwDo