the premier pro does not start in windows 10

Similar Questions

• Windows 8 Pro does not start after windows update updates for April

  Hello

  Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

  The problems starts here; I am more able to start windows.

  It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

  I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

  I run system restore turned on so that the option is not valid for me.

  The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

  Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

  Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

  Disappointed that the "major updates" Microsoft kills my work machine.

  Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

  I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

  Installed all the updates one by one until it chrashed again installing the update mentioned above.

• HP 3500 Pro does not start on Windows

  Hello

  I have a HP Pro desktop computer which worked great, recently, he started do not start windows. The HP splash screen come after that I get the black screen "Windows Error Recovery, Windows couldn't start. A recent hardware or software change might be the cause.
  I tried to start windows normally, safe mode, running all diagnostics and repair and none of it worked. I tried also to the redefinition of the machine at least 3 times and I still got the message and will not be able to start Windows. I took on the memory, the processor, the cd drive and swap the drive with another HP Office work and I always get the message and it does not always boot to windows. I worked on about 50 of them, and this is the first time I came across this question.

  Can someone help me with this problem?

  Thank you.

  Data sheet:
  HP 3500 Pro series
  CPU: Intel i5-3470 processor 3.2 GHz
  Memory: 4 GB
  Hard drive: 500 GB Toshiba
  CD-ROM: HP
  OS: Windows 7

  Also, I can get the bios very well.

  TheOldMan thanks for your help. I had thought about it, for some reason the bios has been changed. I have everything set to default values, and now I'm able to start Windows without error messages or problems.

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• 11.1 workstation, Windows 7 SP1 x 64, EFI, the CD-ROM does not start

  Is Windows 7 x 64 supported as an EFI guest OS in my computer with hardware 11.1 virtual v11?

  I recently upgraded from Workstation v9 to v11.1.0 build-2496824 under my Windows 7 SP1 x 64 machine and tried to create a new guest Windows 7 support EFI and the installation media does not start to get the Setup will.

  The same boot on any BIOS type invited media and I tried Windows 7 and Windows 7 with SP1 integrated all directly from Microsoft, not custom ISOs and none of them will work under EFI, but will work under BIOS.  In the same way 2008 and 2008 R2 media starts if EFI is used.

  EFI VMs can boot media of Windows 8 and successfully towards the top (2012 etc.) but not the previous generation of operating system.

  I tried a few different things, such as starting the ISO from a disk share and local network.

  I tried all 3 variants of the dvd/cdrom: SATA, SCSI, IDE, including the legacy mode which I don't think that is really work because it is not verified when I go back to change the setting.

  I tried to install from the EFI shell initialization, but the media are not yet mounted under blk0 so I can't go any further.

  My boot device options are all configured properly and tried to force the virtual cdrom boot at startup without success.

  I also tried going through the physical CD-ROM mapping rather than the ISO file and not luck.

  My Setup seems to be supported, however the matrix of interoperability and compatibility points vs EFI BIOS support.  I know that Windows 7 supports UEFI then it should work and I've seen posts where people have deployed it successfully under different versions of workstation using the EFI emulation.

  I also tried with hardware virtual v10

  Both typical and custom installation modes recognize media but can't can at start up.

  Should I do the start method USB with a sort of generation of personalized media?

  Here is an excerpt from the log file where it seems just that it's not picking up on startup even though we clearly see the ISO it:

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: connecting sata0:1 to 'D:\WIN7SP1X64ENT.iso '. Type = 2 distance = 0

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: DMG_Open: not a .dmg unencrypted file (footer signature 0 x 00000000).

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: DMG_Close: max cached entries 8

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: check the status of the original physical media...

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: CDROM initial physical state is 1 (meaning)

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: PolicyVMXFindPolicyKey: policy file does not exist.

  I just want to know if it is actually supported and if someone else has this problem there.

  It was about 3.5 GB but I just downloaded a new copy on the site MS VL and apparently boot into EFI now.  Don't know how the ISO precedent (and other ISOs 2008) would work under BIOS but not EFI but it's good enough for me.

  Thanks to confirm support of the scenario mentioned however, I had thoughts seconds on this subject.

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• the Task Manager does not start

  My laptop started running very slowly and I can't seem to start the Task Manager. Ctrl alt delete gives me the opportunity to start that I chose, but I don't get an inactive icon in my toolbar. I am running vista Home basic with service pack 1. When I restart or stop the laptop hangs at logging off-page. I also noticed that some of my applications/startup process are not start or appearing in my toolbar. I initially had Bit defender as my anti virus - but he exchanged for computer related. I had the problem with both.

  Hi Omanianne,

  Please read the following article from Microsoft Help on the Troubleshooting Task Manager.  Specifically, look at the sections of the Task Manager does not start, and How to enable the Task Manager if it has been disabled.  Based on the other symptoms you have described, it is very possible that you have some kind of virus.  Please make sure that your antivirus software is up to date and run a scan complete your system.  Please let us know if you have any problems or questions.  Thank you.

  http://windowshelp.Microsoft.com/Windows/en-us/help/28500b59-2acf-4FCF-8743-393c91915de81033.mspx#ebb

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Task Manager does not work in Windows 7

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  If the Task Manager does not start, your computer may be a virus. Make sure that you have installed on your computer updated antivirus software, scan your system with the AV software in safe mode.

• I was told that Acrobat 9 Pro does not work in Windows 10.

  I was told that Acrobat 9 Pro does not work in Windows 10.

  Hi glent16027488 ,

  It may or may not work, difficult to guess as its on an unsupported platform.

  We will recommend so you can use the application in a supported environment.

  Please refer to this article to learn more about the compatibility of the product:- Adobe Acrobat required configuration

  Kind regards

  Christian

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• The Task Manager does not start. I get a message "task manager has been disabled by your administrator".

  Original title: I deleted a virus from my computer but the Task Manager does not start.  I get a message "task manager has been disabled by your administrator".  Can someone tell me how to fix this.

  Task Manager

  Too bad!  I thought about it.  It has been disabled in the registry.

• transfer of data to the sd card does not start

  Hi all
  In the storage of settings on my Xperia Z2 section, there is an option "transfer of data to the sd card. It allows to work very well. Once the internal memory was terribly full, is come to a notification that says "75% full, data transfer to sd card" tried as always but this time it does not start. When I try to run within the parameters, also does not start.
  Any suggestions are appreciated.
  Thank you

  Use the file Commander app > cut > paste > on the SD card.

• the CreativeCloud application does not start.

  the application CreativeCloud does not start.  Deleted using uninstaller cloud creative, now impossible to install. do not run the program (( ))

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud