HP 35s calculator scientific memory clear loop

Similar Questions

• HP 35s: HP 35s calculator Faction Mode showing the wrong numbers

  This happened to me in the middle of a math test while he was really awkward.

  I use a HP 35s calculator, and it is completely worked fine for me for a year.  I was using the display mode of fraction I discovered recently to convert numbers in the below form, and so I hit: 1201/5525 and it gives me 603/2774.  No matter how you think about it, it's wrong.

  It happened again with 24/5525 becoming 14/3223 and sometimes more.  It's always like that.  I was trying to understand what went wrong and discovered that 24/5525 equals168/38675 while 14/3223 equals 168/38676.  It's the wrong number.  This could be great for decimals, but I work with exact fractions, and I need the exact answer.

  It works very well for things like 6/4 or 2/10, but as soon as he is big he has the answer a few places.  Is it possible to fix this?

  The fraction of the 35 s mode is limited to a maximum denominator of 4095.  He never returns a denominator more than that, so don't expect everything. No, there is no way to set the maximum denominator to something higher to 4095.  You can * down * as maximum for a small integer (between 2 and 4095) by typing and pressing/c button (left-shift, comma).  There is a shortcut to 4095/c is 0/c.

  In addition, make sure that both flags, 8, and 9 is clear, or it will totally mess up your work as a fraction.

  Hope that helps!  DISCLAIMER: I do not work for HP, but HP works for me.

• 35s calculator hp: where to find the download for 35s emulator

  Hi everyone, I am a former surveyor and still want to write programs of inquiry. thinking about buying a hp 35s, but as to use this emulator first.like to keep my mine goes I've always loved to write new programs. I have several calculators and I wrote programs for each of them, my favorite was the 41cx. can not find where download an emulator sure 35s. so help

  Hi!, surveying101bill:

  Welcome to Forum!

  You can download the emulator, for HP35S, since... https://es.hightail.com/e?phi_action=app/orchestrateDownload & Batch_ID = ZWJVdFdXSytKV09jZDhUQw

  

  For HP 41CX, you can download, since... https://www.educalc.NET/326089.page

  

  Also, for HP41C, of... http://SIM41.webcindario.com/

  And discussion of the land surveyor... http://landsurveyorsunited.com/group/hp48calculators/forum/topics/HP-41-programmable-calculator-emulators

• Why my calculation at the time loop repeats only once?

  I have a series of simple calculations (multiply, divide, add, subtract) occurring in a while loop based on input data on the front panel of the user. The results are then connected to local variables that alter the parameters of a signal generator in one another while loop.

  The while containing the iteration of repetitions one calculation, unless I turn the button "Highlight execution" in which case it repeats until the loop is stopped as I expect. With the 'performance highlight' button and using a probe to check instead of the loop does not repeat itself.

  Another while loop with the signal generator allows to reproduce, but uses only the values which were concluded before the VI began to run.

  I need the VI to be recalculated each time a value on the front panel is changed and change the output of the generator signal accordingly.

  What Miss me?

  Because local variables are fixed on the LEDs that are in the position it after the end of the VI it runs correctly the first time and only executes a forward iteration to stop, all in a loop containing calculations, if you run the VI more than once. As long as the LEDS are in the off position when the VI is launched then everything works fine.

  Thanks for the advice, everyone.

• education to ENTER a custom program - HP 35s calculator

  just try to program a quadratic equation in this thing, came across this example of how to provide the two solutions of the equation:

  Statement on line
  ------+-------------
  Q001 LBL Q
  Q002 CF 10
  Q003 ENTRY HAS
  ENTRY Q004 B
  Q005 ENTRY C
  Q006-B÷ (2xA)
  ENTER Q007
  Q008 ENTER
  Q009 B ^ 2-4xAxC
  Q010 x > = 0?
  Q011 GTO Q017
  Q012 + /
  Q013 sqrt, press the k key
  Q014 I have
  Q015 x
  Q016 GTO Q018
  Q017 sqrt
  Q018 2xA
  ÷ Q019
  Q020 +.
  Q021 x <>y
  Q022 LASTx
  Q023-
  Q024 RTN

  fact sense... but I have the stupid question that I could possibly think... How in the hell you enter as INPUT and instruction?  (Q007 and Q008)

  mast

  Hello

  > Try to stick to using the ALG mode... how my brain works is more in line with this mode.

  I understand it, we are all different. Even if I prefer RPN myself, I found it interesting using ALG mode on the 35s.

  Here is the program for ALG mode:

  Q001 LBL Q
  
  Q002 CF 10
  
  Q003 ENTRY HAS
  
  ENTRY Q004 B
  
  Q005 ENTRY C
  
  Q006 B÷(2×A)       ; the first - is the +/-key
  
  Q007 LASTx STO R    ; The LASTx is blue, a black > will show instead of the STO
  
  Q008 B ^ 2-4 × A × C      ; use y ^ x instead of x ^ 2
  
  Q009 x > = 0?
  
  Q010 GTO Q015
  
  Q011-LASTx         ; press + / followed by the LASTx
  
  Q012 sqrt (LASTx)
  
  Q013 I have LAST ×x
  
  Q014 GTO Q016
  
  Q015 sqrt (LASTx)
  
  Q016 LASTx÷ (2 × A)
  
  Q017 R + LASTx
  
  Q018 R-REGY         ; for REGY press on Roll down (E key) and if necessary to highlight Y
  
  Q019 RTN
  
  Press on y x <>see the other root.

  Pressing x <>y swap between the two roots.

  Best regards.

• calculating time in while loop

  Hello

  In one of my application that I have to wait long to get an output and simultaneously maintain a downtime. How to calculate the time above and come from the while loop. I have Labview 8.5 can anyone send me a small ex.

  Thank you

  A simple tick would work, right?... see photo.

• New calculator?

  Hi all!

  I tried to find some information about it! So I couldn't find, that's why I'm here asking you guys!

  I used to have a 35s calculator, however, I had a few problems with mine... Not really a problem if... My calculator got stolen!

  Now I use my 50g for doing things, in which is a great calculator, but you guys know, the 50g is not possible to take with you as the 35 s is... and for the tasks that I am doing, it is not necessary to have all the potential 50 g with me...

  So, I have to buy a new and I started to look around for new HP calculators, the only thing I discovered is that a new first called HP Calculator is coming, but this calculator is a new model for the graphics...

  Does anyone know if HP is about to release new albums a scientist such as 35s? I want to know, because if a new scientific model is coming I would wait for him to make an another 35 s!

  Thank you!

  RE: HP 39gII

  If you live in the United States, I'm not sure that it is on sale here.

  It is a very different graphing calculator in size to 50g in any case and has no RPN.

  Unfortunately there is currently not an update to the 35s.

• large memory usage can cause the HP 35 battery drain

  Hi everyone, I've never had this problem, a friend of mine asked me this?  I said I don't think and these major programs running can consume the battery life, but I don't think that just being stored.   It uses the calculator to convert and lat. on. of UTM, SPCS and vice versa, I think not stored programs would consume the battery life. but he said after loading them several days, that the batteries were dead. My? a what age are the batteries, if one had this issue or problem with the 35 HP s.  My computer is full, with programs and equation., ma is very well, I have two HP33 which are full, and I have this problem, so what could cause this.

  Hi!, @surveying101bil:

  Please, what is the battery you are using? The HP 35s calculator, supports two 3 volt CR2032 Lithium coin batteries, 3V, 225mAh.

  Also, what program use, your friend, for verification.

  [PDF] Energizer cr2032 - Energizer technical information

  Data.Energizer.com › › cr2032 PDFs

• USB6009 limitation in time loop

  LabVIEW dear colleagues,

  Hello
  I have some problems with the hardware device USB6009 and the width of an analog voltage output time.

  The algorithm (see picture) are included in a while loop and can generate a pulse for about 50ms without problem. My problem is when I chose to reduce the time (duration) of the pulse)<50ms). in="" this="" case="" the="" number="" of="" peaks="" (voltage="" pulse)="" become="" episodic="" and="" no="" pulse="" appear="" if="" i="" select="">

  If I remove all other additional calculations in the while loop (for example the algorithm of the pulse is used only for calculation) of 4ms impulses can be observed.

  I think that the problem is due to the time to calculate every while loop. I mean that the examination to check if the elapsed time is carried out at each loop itteration. If the impulse may not appear if the pulse duration is less than the iteration of a loop.

  My question is how to create a pulse controlled length less than one, while the loop iteration (50ms)?

  I tried using the structure of the event, but the result is currently not good.

  Please, if you have an idea feel free to write a comment or a suggestion.

  Thanks in advance for your help,
  Best regards

  Just for other users,

  I tried the solution that proposed to johnsold. Gain in speed is very low and is about 1 ms.
  If the frequency is not the most important parameter, add module of simple material cut to the width of the signals send after the USB6009 could solve the problem partially.

• is there a way to clear the fax log?

  Is there a way to delete / remove the fax log?

  Hello

  To my previous quote the second method must have erased the log of faxes do not know why it does not clear.
  Try following these steps to reset.

  Reset partial:

  1. make sure that the unit is ON. Now, unplug the power cable from the device.

  2. press and hold # and 3 while plugging in the power cord

  3 release the buttons when the product control panel indicates "partial Zero".

  Sometimes the printer turns off by itself, you can release the button and use the power button

  Turn the DEVICE, it now reads "Partial reset" and follow the instructions to set up

  Note: To perform this reset the power cable must be unplugged and plugged it back as needed.

  Reset of semi-complete

  1. turn on the printer and then unplug the power cable from the device.

  2. press and hold # and 6 while plugging in the power cord

  3 release the buttons when the product control panel indicates "semi-Full reset". The product is now reset.
  Sometimes the printer turns off by itself, you can release the button and use the power button

  turn ON the device, it now reads "semi-Full reset" and follow the instructions to configure.

  Note: This step erases some of the setting that you have saved are the following:

  -All default menu settings

  -All default phone setting values
  -Learn some country and language of the user interface
  -Clear fax memory
  -Clear fax log information
  -Clear all the speed dials/mailing lists
  -Personal clear header information

  If my post has solved your problem, please mark as, as accepted Solution

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• loop nested using iteration of the outer loop as counter

  Hello world.  I have a moment where I perform calculations at each iteration of the loop and display on the front panel.  Then, in a loop iteration randomly (referred to here as I = 9 to test) it fires an event where that performs calculations on x number of iterations (iterations of the outer loop while) the result of external calculations, while performing at the same time and the view from the outside so that the calculations of the loop.  Is that two mathematics algorithms are synchronized in iterations.  After x iteration the program returns then to only calculate and display the while loop calculations using the value from the shift register, updated until another event is triggered (I do not show an another event trigger in the code example) I can just find a way to trigger an event , and at the same time to make two calculations with the same loop iterations.  Any suggestions?

  The VI of the sample in the previous post of crossrulz should provide the functionality you are looking for. The while loop acts to go through ten operations you want to perform and records time difference will allow him to record these values, as you understand. I think that crossrulz refers to shift registers on the while loop that surrounds the case structure that records the shift are unusable on a structure of the case, as you pointed out.

• not useful Windows 7 calculator

  I need to do the following calculation

  (2 ^ 28) * (8,192/108) and then convert to hex

  But the hexadecimal conversion is in the programmer calculator and the ^ operation is scientific.

  And copy number of the programmer calculator scientific calculator does not work, because the programmer calculator does not take into account the decimal point

  If I copy the result of to the programmer calculator scientific calculator (20361326440.296296296296296296296)

  I have 2036132644029629629 (this is not useful)

  instead of 20361326440 (only whole and useful)

  IE put 15.8 in the scientific calc, copy in the calc programmer and you get 158. Why don't the programmer calc truncate or round?

  In any case, my main complaint is the separation of the different ECUs, some users may not use several calculators which is very annoying.

  Again, this is because Hex does not 'decimals' points so the whole number. You cannot set the scientific calculator to round to the nearest integer? If not then don't use it - use anything else! If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• BlackBerry Smartphones memory expantion

  Hi guys! I would like to know if I can use a 4 GB memory MICROPHONE of my BB instead of tha memory 1 GB there now. It goes back and forth like any problem for example in tha BB speed?

  the_sire wrote:

  Hi guys! I would like to know if I can use a 4 GB memory MICROPHONE of my BB instead of tha memory 1 GB there now. It goes back and forth like any problem for example in tha BB speed?

  Hello

  To add - gave you wording ("pretty"), I don't think so- or maybe Yes. To better explain, consider this:

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD memory card

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available for you (probably 1 GB space you mention).

  Memory card SD/Media - is what it says... your 4 GB SD card, to store files, media, photos, etc. It can be as large as your BB OS can support... see this KB:

  • http://www.BlackBerry.com/BTSC/KB05461

  So, if your question is to use the device or memory card support, there should be no difference in performance and other. For me, I always store my data on the media card (when allowed... some apps don't) and also let the device memory clear and empty I can.

  On some devices/OS levels, you can see 'Free file' (Options > status), I think this is equivalent to AppMemory. You can see on other devices, all the memory usage levels three (Options > memory). Here are some tips to use:

  • http://www.BlackBerry.com/BTSC/KB15345
  • http://www.BlackBerry.com/BTSC/KB14320
  • http://www.BlackBerry.com/BTSC/KB14213

  Finally, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. On the contrary, to close an application, tap on and select 'Close' or 'Quit'... which force the application to be closed, freeing resources for your new use it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  In addition, each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy. Some have taken to do this on a regular basis as a preventive measure... some as often as once a day. Others got the app QuickPull to automate a simulated Batt Pull.

  Best!

  Good luck!

• Dynamic calculations

  Hello

  I'm quite confused, can someone help me with a parliamentary question of 'dynamic Calc? A few months ago I was modifying one of our scripts of calc which used a dynamic member calc of the dimension parent account.  When I was post results, I received incorrect values.  However when I stopped making reference to the Member parent in the calc calc rather called and dynamic script and summarized the individual children, I had the expected results. Today, I'm looking for and test an other scipt calc, which also uses a dynamic member calc with a formula member and I get the correct answers. Why the inconsistency, I thought dynamic calc only "calculates the value of data during playback. But then go on the Essbase Administrator's Guide I also see "When you reference a member calculated dynamically in a formula in the database schema or a calculation script, Essbase interrupts the regular calculation of the dynamic calculation.» This interruption can significantly reduce the performance of calculation. »

  So the question is: dynamic Calc members can be used in a Calc Script? If Yes, under what conditions?

  Thank you

  Extract from the Essbase Administrator's Guide...

  Understand the dynamic Calc members

  For a member marked as dynamic Calc, Essbase does not calculate its data value in a calculation of batch database (for example, a CALC ALL). Instead, Essbase calculates the value of data during playback (for example, when you retrieve the data in addition to spreadsheet or Smart View.)

  Specifically, Essbase calculates a value for data dynamically when you request the value of data in one of two ways:

  • By retrieving the value of data in the spreadsheet Add-in or Smart View
  • By running a script that displays the value of report data

  Essbase does not store the value calculated; It recalculates the value of each subsequent recovery.

  Formulas and calculated dynamically members

  You can include a dynamically calculated member in a formula when you apply the formula to the outline of the database. For example, if Tri1 is a dynamic member Calc, you can place the following formula on Qtr1 in database schema:

  T1 = Jan + Feb;

  You can't be the target of a calculation formula dynamically calculated a member in a calculation script. Essbase does reserve memory for a computed value dynamically and, therefore, impossible to assign a value to it. For example, if Qtr1 is a dynamic Calc or one dynamic Calc and store, Essbase displays an error of syntax, if you include the following formula in a calculation script:

  T1 = Jan + Feb;

  If Qtr1 is a dynamic Calc or a member dynamic Calc and store and year is neither dynamic Calc or dynamic Calc and Store, you can use the following formula in a calculation script:

  Year = T1 + Qtr2;

  This formula is valid for Essbase does not assign a value to the dynamically calculated member.

  Note:

  When you reference a member calculated dynamically in a formula in the database schema or a calculation script, Essbase interrupts the regular calculation for the dynamic calculation. This interruption can drastically reduce the performance of calculation.

  You can certainly use dynamically calculated members in a calc script/trade rule.

  What you can't do (but), is write to this dynamically calculated member.  What I mean by that is if MbrABC is a calculated dynamically, member you can not send (via Smart View, loads of data or a calc script assignment) data to that Member.  Which is weird, it's allowing of Essbase, at least from the user interface of the client, allow you to send, but then not tell you that the data sent to the MbrABC do not stick.  <--This isn't="" totally="" true="" in="" the="" case="" of="" a="" data="" load="" as="" you="" will="" get="" a="" warning="" message="" that="" not="" all="" of="" the="" data="" got="" loaded. ="" but="" eas/maxl="" will="" not="" tell="" you=""> What members are dynamic and so not a loading managed.

  Finally, the dynamic commentary on Calc being slower in calc scripts is to assess member formula whenever it is referenced as part of an intermediate form of Essbase.  If they have been stored, then it will have to be read from in the block but not actually calculated.  You get to play the popular game of Essbase to ' when I want to feel pain?  As long as the dynamic calc is in the block, calculations in memory are usually so fast that it doesn't really matter.  If the dynamic calc goes through blocks, then there may be some very noticeable pain.

  As for your specific question, you need to be more explicit.

  Kind regards

  Cameron Lackpour

• Cannot make a payment with the new Firefox. Works in Internet Explorer.

  Try to make payments on an https site and is no longer functions after upgrade to Firefox. Had to resort to make payment through IE. Memory cleared cache, restarted, etc has no effect. No messages pop up, connection is good, just, it does not allow payment options work.

  the profile information you submitted with your original question do not resemble the profile has been freshly reset - please try again: Firefox Refresh - reset the parameters and modules

  If it does not, please run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner as well.