HP 364XL - Photosmart B110 cartridges. Black finger to the bottom of the page. Windows 7 Home Premium

With the help of genuine cartridges of HP 364XL on my Photosmart B110. Almost everytime I print a document (black) I down a blob of ink and a line to deface the page then just left of Center. Also when you print pictures, I get a blob of black ink on the surface, this can be anywhere on the photo. If I wipe it out on a photo only he quickly leaves a light red looking for smudge.

I just ordered a complete set of replacement cartridges to see if that helps.

I tried to clean the cartridges several times without success.

I'd take a glance at this document , it gives some useful to try troubleshooting steps.

Let me know how it goes.

Tags: HP Printers

Similar Questions

  • Crysis stuck on black screen on Windows 7 Home Premium 64-bit

    OK, for starters, I had Crysis installed on my system before but had to reinstall Windows and now nothing does, not even Fallout 3 GOTY Edition on my system, I have more then qualify for a game but I am still having problems.
    --------------------------------------------------------------------------------
    * After clicking on Crysis.exe it will appear to load then remains in black screen "forever" until I hit a key on the keyboard or manually close with the Manager tasks.
    --------------------------------------------------------------------------------

    * The things ive done to solve these problems listed below:

    1 patch 1.2 and 1.2 to 1.2.1 (no effect)

    2. put up-to-date video/audio drivers 'Again' (no effect)

    3 update Direct X (no effect)

    4. Uninstall and reinstall, and then try to run the game (no effect)

    5. application of hotfixes again after reinstall (no effect)

    6 restart the system periodically just in case (no effect)

    7. check the contradictory programs (found nothing)

    8 ALT + ENTER on eternal black screen (no effect)

    9 running the game in compatibility mode for XP (no effect)

    10. run the game in compatibility mode for Vista (no effect)

    11 run the game as administrator (no effect)

    12. in the process of running 32-bit and 64-bit variants (no effect)

    13. Windows in a State of clean boot (no effect)
    --------------------------------------------------------------------------------------------
    In the rare cases where it was working switching settings or load anything on the menu crashed the game

    If someone reads this and has all the solutions/advice please leave a message, my computer plug below.

    ----------------------------------------------------
    64-bit Windows 7 Home Premium
    AMD Athlon X 2 250 Regor 3.2 Ghz
    4 GB DDR3 1333 MHz
    ASUS NVidia Geforce GTS240 1 GB
    WD Blue 500 GB HDD
    Orion 575W PSU
    ASUS M4A785TD - V EVO 'motherboard '.
    ASUS 24 "VH242 1080I ~ 1080 p Max Res: 1920 x 1080
    HP DVD1270 24 X multiformat DVD writer

    Here is a link that will help you further:

    One of the problems causing my crashes Crysis DX10 was a bad stick of RAM. I had to test each stick individually with MEMTEST86.
    The first time all the sticks passed but after continuing crashes, I retested and found a bad stick. Another thing I noticed was that many accidents have occurred when my clumsy fingers were depressing too many keys at the same time. Crysis has a lot of problems even with the newest and the best material of today but still lots of fun when it works.

  • Black screen problem and I have a real Windows XP Home Edition. Help, please!

    I have a genuine Windows XP Home Edition came with my Dell computer. After downloading the critical updates a few weeks ago, I now get the black screen and the message window saying that I may be victim of a counterfeit and that my system may be at risk. What can I do to clear up this problem? Thank you.

    Please visit http://www.microsoft.com/genuine/ and click on the button to validate Windows or validate Office, and then restart your computer.

    If you were not able to validate, follow these steps:

    1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

    -Online Windows XP: double-click the executable file to run the tool.

    -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

    2. after running the tool, click on the Windows or Office as appropriate and then click on copy to the Clipboard.

    NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

    3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA or OGA data diagnostic in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

    4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • When I try to move a windows in my Windows Vista Home Premium I get a black outline

    Graphic problem of Windows Vista

    When I try to move a windows in my Windows Vista Home Premium I get a contour black (see here), how can I fix?

    Hello

    . What is the exact model of the Toshiba laptop number?

    You can check the link below and download the Windows Vista drivers for the graphics card and check with the question:
     

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    I hope this helps.

  • Photosmart Pro B8850 questions - Windows 7 Home Premium 64-bit

    Photosmart Pro B8850 - worked fine with Vista 64-bit!

    With Windows 7 Home Premium 64-Bit, prints get hung in the print queue.  Diagnosis HP suggests bad USB connection or level ink cartiridges low - neither of which are correct or appropriate.

    The 'later' drivers are installed - BUT given their dates seem to be several years old?

    Best of cases, I can get that one image printed before my $500 printer hangs up.  In the end, I am unable to print anything

    H E L P

    Uninstall / reinstall seems to have solved my problem!

    T H A N K S

  • HP CP4525DN print black all over the Page

    Hello, I have a HP CP4525 that prints black all over the page with the exception where there are printed words.  I reinstalled the fuser unit and tried to swap black ink.  It's a brand new printer from the box.  I have attached a picture of one of the printing as kind of hard to explain what the question.

    Any help would be appreciated.

    Edit - added an another attachment with the print quality test pages

    Has started sharing a printer of spare parts in another office.  Turns out be the formatter Board.

    Thank you.

  • Black finger across the screen to the bottom only in locked mode - retina 2014

    Mine is a MacBook Pro (retina, 15 inches, mi 2014) 2.2 GHz with integrated display. When I opened the laptop this morning, I was welcomed by a screen locked and noticed a black spot on the lower part of the screen. My heart sank for a moment, but when I logged in, I did not notice the finger any longer.

    I see the black spot that looks like an ink spot (see photo) when I get back to screen locked again. What is an LCD failure or is there something else going on? If it's an LCD has failed, why not see the problem when it is unlocked? How to fix? Thanks for any help.

    Notice the black spot. The white point at the bottom left of the screen above is just the cursor hidden.

    No stain when unlocked can be exceeded.

    Could be a hardware failure.  If you bought AppleCare, you have 3 years warranty on the material and can diagnose the Genius Bar it repair free of charge - it is reproducible, so you can show them.

  • A new cartridge black HP564 on the online store HP says 'damaged' when inserted. What to do next?

    I just tried to install a new cartridge black HP564 I bought the HP Store online. I keep getting a "cartridge seems to be missing or damaged."  I replaced the cartridges frequently, but this is apparently a faulty cartridge in the HP Store. May be returned?

    Thank you captijack. Glad to hear your got running again. Also thanks for the kudo, I appreciate it. If you have any other questions do not hesitate to post them.

    Take care

    Sean

  • Firefox 18.0 black screen only on secondary screen / black box around the mouse, Windows XP, all updates

    Display after the automatic update of firefox firefox 18.0 normal if has a totally black screen (inside the border) if the window is secondary - window on the main screen. The mouse pointer (arrow) also has a box around it when firefox on the secondary screen. The display is normal if the frame partially covers the main screen.
    Environment: Lenovo 9088CTO Office 3072 usable MB installed memory
    Windows XP PRO all updates.
    ATI Radeon HD 2600 XT [graphics card]
    IBM L200P [Monitor] (20.2 "screws, s/n 66-C5539, October 2003)
    IBM L200P [Monitor] (20.2 "screws, s/n 66-G8505, April 2004)

    Try disabling hardware acceleration in Firefox.

  • HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

    I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

    When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

    I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

    Thank you, Glenn...

    400workstation

    It looks like one or more of the boot loader files has been corrupted.

    You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.

    You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.

    The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

    When you download this file, it will be an ISO file.

    To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/

    Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

    To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/

    Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
    -------------------------------------

    Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html

    You will probably need to run Startup Repair three times for him to fix all the boot loader.

    Once completed, your PC should start OK.

    If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

    Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck
    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
    If my posts resolved your issue please click "accept as a Solution.
    ========================================================================

  • HP Photosmart 5520 - Windows 7 Home premium 64

    I downloaded and installed the latest drivers (HP Photosmart 5520 on Win 7 Home premium 64-bit connected via USB) without problems, but when I try to print a page with images or other graphics, the page starts but stops after more or less half a page, the document remains in the queue for 2 or 3 minutes then reports an error and printing cancelled. If I print something in Notepad, it works.
    I followed all the instructions on the site. HP print and scan the doctor reports "driver conflict" and suggest to uninstall and reinstall. I did it several times without results, there is no other printer or another hp device installed on my machine.
    The same printer installed on a laptop with windows xp works fine... Any idea?
    Thenk you in advance
    Francesco

    Hi there hlvs, thanks for responding

    The printer's test to be good, since it works on your mobile PC that is running Windows XP. I suggest then to try to do all your updates of Windows on your Windows 7 computer to see if that helps any. Complete all updates, even those in option.

    Install Windows updates in Windows 7

    Happy Monday

  • Black screen with cursor, no login screen; Windows 7 Home Premium 32-bit

    Hi all

    I have a Dell Inspiron 1501 running Win7 Home Premium 32 - bit with IE9. It worked perfectly fine for over a year. The last update listed in the system restore was on 23/04/2011. He installed the Windows updates.

    My husband used the computer very well the next morning. When I tried to start the computer, it wouldn't so I thought that maybe the battery should be charged. I plugged it in and nothing helped. The load button wouldn't even nothing worked at all. I bought a new battery and it came yesterday. I changed the batteries and let one over new-completely. I then tried to start the computer and he did something I could not do in months... He ran the disk check.

    The disk check lasted almost 2 hours. He wouldn't let me cancel it either. He said (from the pieces that I could see) that system files have been moved, a ton of them said that they have been replaced, others have been removed, and some have been updated. I knew not what do when it restarted because it did it is normal startup, showed at the Windows startup screen and then when I thought he was going to the login screen, it became black and only the cursor has been visible and moving.

    I restarted again and this time the display of incorrect closing came. I tried all the options - normal mode, safe mode safe mode w/networking and safe mode w/prompt - all results were the same. Then I tried using the recovery tool to fix the problem. Startup Repair showed no problem, System Restore showed either deleted or corrupted files and I ran Windows Memory Diagnostic and it showed no problems. I even ran the Diagnostic tool in the start menu.

    I think that chkdsk deleted my files of Windows, but I don't know how to get back them. I have the OS disk and tried to use the repair feature, but nothing yet. Also, I had to ask my husband did it to my laptop and he answered nothing. So I had to be more specific, and his answer to my questions were: ' I didn't download anything "and" I just closed the laptop, I never disconnected or shut it down. I guess that's the reason for the battery works not properly the next day.

    If someone could help me with this, I would be very grateful.

    Hello

    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    References to Vista also apply to Windows 7.

    No registration necessary data and re - install Windows 7 might be the best
    the option but here are some others.

    You can save your files by putting the drive in another computer or a
    drive enclosure external hard and then save the. Do this using several
    methods to redundantly. Of course a real computer store or
    the manufacturer of your system can help to recover the files.

    Or you can use a boot Ubuntu CD to back up data.

    Use Ubuntu Live CD to backup files from your Windows computer dead
    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

    --------------------------------------------------------------

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - Device Manager - Display Adapter - Double
    Click on - driver tab - click on UPDATE driver - then right-click on
    Devices and UNINSTALL - REBOOT.

    A method to try to get to the desktop (try in two regular windows
    and Safe Mode) is to CTRL + ALT + DEL - Manager tasks and the
    Processes tab find EXPLORER.exe and END PROCESS on it-
    then on the Applications tab - lower right kind - new task - in
    EXPLORER.exe. Safe Mode is available by pressing F8 repeatedly
    you the trunk upwards. CTRL + SHIFT + ESC also begins the Task Manager.

    First check this thread in case it is simple and if not come back
    on this subject.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Screen black issues are extremely difficult to repair and to any fix is
    usually on a hit or miss basis. There is no information on a black background
    screen as it is on a blue screen just adds to the difficulty. Often
    using a restore point or Startup Repair will have no effect.

    You can try a google to see the proposed repairs, some of which have
    works however these cover a wide field of efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a window 7 disk? You can try restoring the system to it.
    If you don't have the disks from your system manufacturer will sell them at low prices.
    Or try in safe mode if you can get there.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    You can create a recovery disc or someone else use same version
    (restoring the system only to be bootable).

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ------------------------------------------------

    These require good Windows 7 drives (especially if you can't
    boot mode safe).

    Try the Startup Repair tool-

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    Try Repair Options recovery or a Windows 7 boot disk system

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    'Windows 7' black screen - check that a 1st
    http://www.google.com/search?hl=en&source=hp&q=vista+black+screen&aq=f&oq=&aqi=g10#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen&oq=%22Windows+7%22+black+screen&gs_l=serp.3..0l2j0i7j0.11061.20608.0.21138.19.13.1.0.0.4.874.5490.2-2j4j5j1j1.13.0.les%3B..0.0...1c.1.5fPLvNo9C0U&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731

    Black screen solution "Windows 7".
    http://www.google.com/search?hl=en&q=vista+black+screen+solution&aq=f&oq=&aqi#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen+solution&oq=%22Windows+7%22+black+screen+solution&gs_l=serp.3..0j0i8i30l3.83803.88983.0.89342.18.9.2.0.0.4.1950.6210.0j1j1j2j2j7-2j1.9.0.les%3B..1.0...1c.1.DJgtecu85jA&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731

    Fix black screen "Windows 7".
    http://www.google.com/search?hl=en&q=vista+black+screen+fix&aq=f&oq=&aqi#hl=en&sclient=psy-ab&q=%22Windows+7%22+black+screen+fix&oq=%22Windows+7%22+black+screen+fix&gs_l=serp.12..0j0i7l3.112960.116439.0.118669.13.5.1.0.0.3.1809.5242.2-1j5-1j0j2j1.5.0.les%3B..0.0...1c.1.K18bh3X267U&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4624fb5637e33ac3&bpcl=35466521&biw=1024&bih=731

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    If nothing works, you can do a repair installation.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, to
    a type of Windows 7 boot disk: (type a line or copy and paste a line)
    at the time and hit enter - enter a parenthesis or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    =================================================================

    These help in some cases:

    There are backups in the folder C:\Windows\System32\Config\Regback.

    These methods replace the registry with a backup.

    Start with a Windows 7 disc. Both the complete following restoration
    a backup of the registry.

    How do I recover from a corrupted registry that prevents Windows XP
    startup ( Vista and Windows 7 also using the instructions in the manual)
    http://support.Microsoft.com/kb/307545/

    Check this thread - you can use the command to a startup or recovery disk prompt.
    (It's Vista and Windows 7 is the same)

    http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

    ========================================

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    If you need to repair disks - these help repair Windows not re-install.
    Often these records will help when the OEM recovery disk does not work.

    Download Windows 7 system recovery discs - charge now $9.75 for ISO
    images to make the discs. (It can be done on any computer running XP,
    Vista or Windows 7 which has a CD/DVD burner).
    http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

    How create a Windows 7 system - free repair disc (must be made on a
    Windows 7 computer running the same 32-bit or 64-bit).
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    An installation disc is possible also to use for repair. Of course you would
    Use your own COST (product key).

    How to: What are my options for Windows 7 reinstall media?

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

    See MVP Andre Da Costa message in this thread.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Photosmart 3210 moved to Windows 7 Home Premium (64-bit)

    I got a new Acer laptop with windows 7 and can not install the driver for the photosmart 3210 has even thought that there is a driver for windows 7. I even tried with xp and vista and as pilots to expect that they did not work.

    Wow, nice of you guys for we inform Wizard installation for users of windows 7. thought of you guys have worked for hp?

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-90246-5&CC=us&DLC=en&LC=en&OS=4063&product=439488&sw_lang=

  • Large black spot on the page and pasteboard

    I use CS3, InDesign worm. 5

    I have 100 pages (type, a book page 440), with a large, 1 x 3, solid black spot (a double sequence) that extends from the top of the chessboard of paste into the document of 1.5 inches on a single page. Sometimes it disappears, sometimes it reappears. I exported the file to PDF (for printing high quality). It was not visible in the PDF, but it printed (printing of digital book CreateSpace).

    The task cannot be selected, moved, etc.

    The file contains four layers. The task is primarily associated with a single layer. However, when I turn this layer or all the layers off the coast, only the part of the task inside the text box disappears. The part which exceeds the frame of text on the page and the remains of cardboard.

    The blemmish appeared during a crisis of sneezing (allergies) while I was working on the document. I touched or that you clicked on something, but I have no idea what.

    • I moved out of the page, the text block, and a new time, not linked, given. Most of the task moves with the original text block (everything that was inside the frame and the part on the outside). I made a new image and the task has returned - now in two locations: in full size on the page, and most of it on the block of text on the pasteboard.
    • I deleted the page, created a new page and created a new block of text. As I entered the new text, the task has reappeared.
    • I exported the File Interchange format. The task remained.
    • I deleted the default settings of InDesign and saved data files. The task remained.

    I can cover it with a full framework of white: However, I do not know if it will work in fact when the book is printed. And if this is the case, I can't delete the part that covers the text.

    Walton

    waltonm wrote:

    I've linked a copy of page problem here is a postal fold of the indd file packed; Therefore, the fonts are included.

    Walton.

    I exported the IDML file and also as RTF. Opening the IDML retained the task.

    Placing the RTF into one new file has also retained the task; even if the fonts were all gone, the glyphs appeared in applied fonts. A strange thing is that the police of DickChamberlainsDeathF na not show coloring and missing fonts in the menu drop-down police in Control Panel, there is no brackets around his name (parentheses indicate missing fonts).

    Someone at - he a clue about this strangeness?

    I exported the text file. The form disappeared when the text file has been placed in a new document.

    Then, I reapplied the fonts for the text - named police has been applied to all paragraphs in the police force. No character.

    The default size is 12pt. I've selected all the text in the frame and increased the font size to 15pt and BINGO! It's BAAACK! He remained as I unstapled each action step by step.

    I suspect that the task is triggered by a character in one of the fonts. It does not go away when the fonts are changed to fonts known to normal. If these fonts are not major fonts foundries creations, or if they have been changed by a scientist crazy fonts, the problem is probably a calculation error in the view of the police.

    If you want to really find the source of the problem, I would suggest to start with a new file, set the default to a known a type font, course new samples of text for a set of glyphs, copy and paste the glyph to make enough for your samples, and then save this file, and then save it under a new name. One, apply a suspicious police to a set of glyphs. Save under a new name that indicates the applied font.

    Open the first saved file, save it with the name of the second font that you want to test. Apply this font on the second set of glyphs. Save again.

    Browse through this routine until you have a set of files which have all games of glyphs, but that one policy applied to each file. If the task has not appeared, start back in the first file with a font applied. Select the text with the applied font and change the size from 15pt point. If that does not cause the problem, save the file as a new file with 15pt in name.

    Repeat this test for all files. If the task appears, you will have an idea of what font causes.

    If the task has not appeared, start over with the first file who first applied at 15 PT fonts, save it under a new name. Select the second group of glyphs and apply the second font. Record. If no stain, increase the font size of the second group of glyphs to 15pt. If no spot, save and repeat with all other files, apply the n - th police to the n-th glyph group. Save new names. Change font at 15 PT etc.

    If still no spot, start over with the first file. Register a new name. Apply every nth font in each group of the n - th glyph, in this one file. If this does not display imperfections, try the same strategy with the remaining files.

    HTH

    Kind regards

    Peter

    _______________________

    Peter gold

    Know-how ProServices

  • To the scanner on HP photosmart B110 prints black blocks for photos

    Mac OS 10.9 with aio B110.  Scan print images as all blocks blacks and texts in the form of broad wavy lines spaced every half inch with thicker lines aprox.  Printer print and copy normally.  It is just the result of scan that is corrupt.  Any help gratefully received advice.  I'm at my wits end

    Hi latestar,

    For images scanned coming out with black dots, a broad wavy line spaced and more thick lines of scanning HP after the upgrade to 10.9 Mavericks. I checked the HP drivers and download page, and at this moment there are no updated drivers. I've included the document 'OS X Mavericks v10.9: installing and using the printer on a Mac', this will ensure that all the Apple updates are complete, as well as answering frequently asked questions.

    I have also included the document 'how Scan: OS X v10.9'. This document will guide you through the steps in the analysis of different programs, such as the preview of Apple and Apple Image Capture.

    Thank you.

Maybe you are looking for