Satellite L300 - black screen and a cursor flashing at the top left

Similar Questions

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• black screen with a cursor flashing at the top on the right"

  Hello

  Hoping someone here can help me.  I tried to put in the other forum, but nobody helped me

  I don't know what I did but it works now

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• My computer has a black screen and a cursor and there is no menu start more

  Original title: replay Vista operating system

  What I would like to know, is my computer only has a black screen and a cursor, there is no menu start, so I can stop and start a new installation of windows vista? If anyone can help please. I thank you very much for your time and have a fantastic day. Shawn

  Hello

  What changes have been made on your machine for there to be a black screen with a cursor?

  Rather than doing a clean install of your operating system, I suggest you do the following.

  Step 1:

  Remove all external devices (printer, USB flash drive), as appropriate, and start your computer again and check.

  Step 2:

  If this is little help, start your machine in safe mode and check if it starts on the desktop.

  Let us know the status of the issue.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Satellite - black screen and can't restart with the recovery disk

  I have a black screen and can not restart with the restore disc but it seems to be.

  I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

  Hey,.

  This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
  You can start Windows or access the BIOS?
  You must post a few more details, otherwise we can t help you :(

  Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

• Satellite L550 - black screen with mobile cursor on startup

  Hello world

  I have a Win7 of Toshiba Satellite Pro l550-17u with a startup problem, black screen with a cursor, but not going beyond.

  Tried to reset the default values on initial F2 menu configuration
  Tried to boot in safe mode and the safe mode with networking
  I tried Repair computer option
  Tried the restore advanced user
  Tried to load the recovery disk
  Tried to boot the laptop directly from the disc
  Tried to remove the battery, but made no difference

  When I get the white screen with the cursor, I tried a few things mentioned.
  Ctrl + alt + delete to get the Task Manager, but nothing.
  Pushin' Win + R to open the Run dialog box, but it does not work.
  Click on SHIFT 5 times quickly to get ticky key opened to get to the Control Panel, but it did not work for me.

  Last night did not turn on my laptop turned off but when opened I received a message that my system has recovered from a serious error, you click on close and then it turned off my laptop had this problem since.

  Next step i think I can reinstall the memory but don't really want to start taking it to bits.

  I also have a large amount of data I really want out of the hard drive. any suggestions?

  Any help or suggestions much appreciated

  Hello

  To be honest, for me it looks like a Windows problem. Maybe something messed with the registry and Windows can start t more

  I think that you must restore windows recovery disk Toshiba you wrote that you have tried to load the restore disc but what happened after that? Can start the installation of recovery? If so, you should do this.

  Backup, you can do if you buy an external HARD drive enclosure. Remove the HARD drive and install in the case of HARD drive. Now you can connect to another computer.

• Satellite L300 - 1AP PSLB8E starts not--a black screen and blinking cursor

  I have a Satellite L300-1AP model no PSLB8E.
  While trying to do a system restore on it the screen became empty outside the slider, and that's how it remains.

  I can switch off and restart it, will begin to start, then exactly the same thing happening.

  Plesae any ideas?

  > pressing the zero key "0" turn on the power, when you see a white bottom bar and hear a glance release the Zero key and it should start installation or reinstallation of your system

  I doubt it will work because this function is NOT implemented on Toshiba notebooks European but as I know about the series of notebook Toshiba U.S.!

  You can try to press the F8 key. An option called fix my computer should then be visible. Select it, then choose Toshiba HDD Recovery. Then a HARD drive recovery procedure must begin.

  But if it of not possible to choose this option, and then you take your recovery disk and must try to boot from it.
  If you don t have a recovery disk, and then use a CD of original installation MS windows, or you can order a new disc of recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Re: Satellite L300 - black screen with flashing white cursor

  All of a sudden my laptop won't start more. It turns on, displays screen toshiba for a second and then goes to a black screen with a blinking white line in the upper left corner. I can't type something here! The last time I used it it was 100% very well, I have not downloaded anything so I'm very curious to what it might be.

  Help, please!

  Hi mate,

  Maybe something messed up to the top of your Windows installation and if the computer may start t more or your HARD drive becomes faulty...

  You can access the BIOS? If so, check if your HARD drive is recognized. If so I think that it of necessary to reinstall Windows. Therefore, take the Toshiba recovery disc.

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Satellite P200D - black screen and does not just by running

  Hello everyone, I have a Toshiba Satellite P200D - 107 PSPBLE with configuration set-aside:

  Processor: Turion x 2 TL - 52 64-bit clocked at 1.6 Ghz
  Display: 17.3 inch
  Graphics card: Ati radeon x 1200
  RAM: 2 x 512 MB ram (1 GB total) which I upgraded to 1 x 2000 MB and 1 x 512 MB (for a total of 2.5 GB)
  OS: FACTORY CD WINDOWS VISTA HOME PREMIUM 32-BIT
  Power: Running on the direct power without the battery cable

  Although the pc is quite old sound fundamentally new barely there 1 year of normal use on it.

  PROBLEM:

  The screen goes black (no), even if the screen still has the backlight running, the laptop is still under tension, but its basically in a kind of deep hibernation with the fan running yet.
  The laptop screen turns off 5-10 minutes after windows loads, even if in idle, it also stops during installation of the operating system.
  I tried to run the music and the music stops when the screen goes black made all the hard disk activity which I believe indicates that it is not related to the video chip.

  TRIED SO FAR:

  1. open up the computer laptop and cleaned all dust processor, now CPU temp is 50 max, even for hard disk
  2. update the bios to the original to 1.70 - did not help
  3 connected external monitor also stops it the same time as the laptop screen indicating it is not not a screen issue
  4 reinstall OS several times
  5 tested memory with memtest64 - no error
  6. test the hard drive with hddregenerator - no error

  What I've noticed:

  If I leave just a 512 MB of ram in the laptop then the laptop stops not at all even in windows applications, tried to launch a game to remove video card and it works without problem for hours, but as soon as I add the stick of 2 GB or another origianal 512 stick it will go inside the black screen 5-10 min (or earlier) to get into windows.

  He never stops in dos mode (as in memtest, hddregen) even with 2.5 GB of ram.

  After that the screen goes black, if I stopped and then try to save, it it won't work at all, the screen stays black with the fan spinning and boot CD, I must absolutely disconect the power cord power and re - set before it starts again.

  Anyone has any ideas, I am experienced with the pc, but have never stumbled upon something so weird that I have just can't explain this problem that came straight from heaven.

  Toshiba to wake up, this forum is a total joke, you would think that you would be able to afford hiring a bunch of technicians to actually help people rather than rely on the users of the forum to do your work for your, you don't need to have a forum, if you don't have the staff to actually help people solve their problems.

• Windows 7 - partition windows on a new drive... travel startup gives nothing but the black screen and blinking cursor

  I am replacing a hard drive and move a partition Windows 7 from one disk to another.  The original partition of Windows 7 starts and works perfectly, but when I clone to the new drive, I have a terrible problem getting the new boot drive.

  On the original drive, the partition is the partition 3, on the new disk partition is partition 2.

  Both drives have the same size of cylinder.

  The new partition was created as a partition main with the same dimensions as the other and cloned in the whole content of the partition.  The files are all there in the new partition.

  He is currently not starting correctly, it starts the partition, but then he's here - I don't see Windows Welcome screen or anything - just immediately inadmissible black screen with a blinking cursor.  All I can do is reboot.  By pressing F8 at startup does nothing.

  Start of support for windows 7 and running repair features discovered the new partition as C: and CHKDSK C: points and gives a good report of the partition.

  BIOS settings have been lacking.

  The following commands were executed the repair windows 7 installation media feature:

  Of http://technet.microsoft.com/en-us/library/cc749177 (v = ws.10) .aspx

  BOOTSECT/NT60 C:

  And http://support2.microsoft.com/kb/927392

  BOOTREC /FIXMBR

  BOOTREC /FIXBOOT

  C:
  BOOT CD
  BCD ATTRIB S H R
  REN C:\BOOT\BCD BCD. OLD
  BOOTREC /REBUILDBCD

  The new partition was made active and is the only asset.

  If I erase and freshly installed Windows 7 on the partition, it does not start successfully, but if I then replace the contents of the partition with a clone of the other partition of work, it does not work.

  So that leaves me with a pretty good confidence that the problem has nothing to do with the charger starting and everything related to the content of the partition itself.

  I can't find more useful information for the boot partition.

  Any ideas?

  Moving Windows is not the best method.

  It is better to 'image' or 'clone' Windows to the new drive, using software such as Acronis

  True Imageor AOEMI Partition Wizard (free). I've used both (has a free version of Western Digital

  Acronis to use if you have WD hard drives).

  .Acronis.com/en-au/Personal/PC-Backup

  .disk-partition.com/Free-Partition-Manager

  (EDIT: I need to be careful.) Had redundant stuff here...;). )

  Dual-boot can be difficult in the best of times, but two partitions on a HARD drive...

  I don't think that you can select a particular partition in the BIOS to be your first boot option, only

  from the HARD disk, so it would be a blow to the top.

  See if there's useful information below-

  .sevenforum-Restore-Windows-7-Master-Boot-Recor

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

  Hello

  I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

  I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
  What I do, he turns to blue screen with the same information.
  Tried to reinstall from the CD of restoration without success.

  Help would be massively appreciated.
  Saad

  Hello

  > Tried to reinstall from the recovery without success CD.
  In this case, it seems hardware problem.
  BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

  But this could be one of the possible malfunctions