HP 48gii: hp 48gii trigonometric function help
Hello
I'm not sure what I did to my calculator, but instead of giving me the answer for a question of trig (for example cos 40 = 0.76604444311) happens only with cos (40).
I have it configured in Deg, XYZ, DEC, IR = 'X '.
Any help to give me answers would be gretaly appreciated.
Hello
Your calculator is symbolic and Exact.
In the MODE menu, select CASE (F3) and put a check mark next to or the two '_Numeric' and '_Approx '.
For more information on these and other modes of CASES, see Appendix C of the Guide of the user
http://h10032.www1.HP.com/CTG/manual/bpia5322.PDF
See also the advanced user's reference manual.
http://h10032.www1.HP.com/CTG/manual/c02836298
Appendix C flags - 3 and-105 describe the symbolic modes and about.
(section 1 provides an introduction to RPL programming
section 2 gives examples of programming and
Chapter 3 provides the details of each order of 50 g)
The HPCalc.org site that has a lot of documentation, programs and hardware support for the 48gii can also interest you:
Tags: HP Tablets
Similar Questions
-
Rank as aggregate function - help
Hi all
I am trying to learn oracle RANK as an aggregate function.
After that I run under request.
with temp (No., name, dept, sal) as
(select 1, 'aaa', 20, 32254 double Union all
Select 2, 'eee', 20, 45615 double Union all
Select 3, 'fff', 10, double union all 34645
Select 4, 'bbb', 30, double union all 45734
Select 9, 'mmm', 30, 23225 double Union all
Select 8, "nnn", 20, double union all 43565
Select 5, 'bbb', 20, double union all 56116
Select 7, "ccc", 30, double union all 45166
Select 6, 'ccc', 20, double 75166)
Select
Rank (45166) WITHIN GROUP (order by sal) as rank_1,
Rank (10,45166) WITHIN GROUP (stopped by the Department, sal) as rank_2,
Rank (45166,2) GROUP WITHIN (order by sal, no.) as rank_3
temp;
I get the output voltage:
rank_1 > 5
rank_2 > 2
rank_3 > 5
Here, how is the value of rank_2 is 2 and rank_3 is 5, I expect that two column should be zero because it does not correspond with the records.
Please help me understand, how does the row aggregate function is the species.
Thanks for all help you. Please let me know for further details.
If possible, any study link to learn the rank of aggregate function.
Oracle version:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
"CORE 11.2.0.3.0 Production."
AMT for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Its says not where is the match - but where it appears in the list - game or not.
It's your list sorted by dept, sal
SAL DEPT
---------- ----------
10 34645
32254 20
20 43565
20 45615
20 56116
20 75166
30 23225
45166 30
30 45734
10,45166 would appear in the slot 2
-
50 g: HP 50g is not right graph of trigonometric functions
Hello, trying to graphical things like Y = SIN(X) and Y = COS(X), Y = TAN (X) mode degrees I get graphics and table results
that cannot be right.
Instead of a signal sinusoidal, all I get is an oblique line very shallow. For all cos there is a line above the x-axis. The tangent is the same thing as Sine.
To put the calculator in Radians mode it does very well, but it is in radians.
I tried the same parcel on my HP48G using the regular tracer and mathtools, but I always get the same things.
Is there a setting I have hurt either I put something in incorrectly? Using a Ti-83 (awful piece of tat) it works fine. However, it is part of the worst graphics calculators that I've never used, so I don't want to use it.
If all the other details are necessary, I can try to give them. Thank you.
Is there a setting I have hurt either I put something in incorrectly?
The problem is probably caused by incorrect setting "window." Press down the shift to the left and holding it down, press the F2 key (see 'WIN', which stands for 'window'). Make sure now the H-view (view horizontal, that is, the values of axis x on the left and right of your screen edges) are reasonable for the degree path mode. Try something like-360 and 360, for example. This would correspond to a 'window' of - 2pi + 2 pi in radian mode.
Hope that helps! DISCLAIMER: I do not work for HP, I'm just another passionate about Calculator HP happy.
-
Strange behavior with the function «Help in command line»
So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:
If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.
All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:
Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?
Note - side
Curiously, the Index for the help lvconcepts.chm file looks like this:
In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).
Hello
Please contact National Instruments!
It is a very strange behavior. I tested out and seen the exact
same results you are experiencing. This was reported to R & D (AUTO ID # 130246) for further investigations.
From what I can tell the a possible workaround solution that we have documented
in the post of root Canal. I can't continue to look into this in order
to see if there is no other workaround solution or a reason why it is
run in this way. Thanks much for the feedback! If
you have any other questions on this subject please post them here.
Have a great day! -
private error 1013, function Help!
Hey I'm new on this but I was stuck on this problem for a couple of hours now... If anyone can see what is the problem that would be great! I've highlighted the line on which the product error (line 68) I have my braces correct I think so I don't see what the problem is. Thank you.
package {}
import flash.display.Sprite;
import flash.text.TextField;
Import Classes.P_Circle;
import flash.events.MouseEvent;
SerializableAttribute public class Main extends Sprite {}
private properties
private var container: Sprite = new Sprite ();
private var textBox:TextField = new TextField ();
private var: padding: uint = 10;
initialization
public void Main() {}
Adds a random number of images for the contatiner
this.makeImages (getRandomNumber (10.5));
Add a mouse listener to the container
this.container.addEventListener (MouseEvent.CLICK, hitObject);
Add the container to the scene
stage.addChild (this.container);
function to draw the user interface and configuration
This. ConfigUI();
}
private void ConfigUI (): void {}
this.textBox.x = 5;
this.textBox.y = - 10;
stage.addChild (textBox);
}
methods private, calculator
private void hitObject(e:MouseEvent):void {}
change the transparency of the circle
e.Target.alpha = 0.3;
calculates the new x and y for the forms
textBox.text = "x" + e.target.x + "." y: "+ e.target.y;
}
private void makeImages(nImagesToCreate:uint):void {}
var obj:P_Circle = new P_Circle (1,1);
This is to keep the circles of collision when placed at random
var maxCols:Number = Math.floor (stage.stageWidth - obj.width - this.padding);
var maxRows:Number = Math.floor (stage.stageHeight - obj.height - 50);
obj = null;
}
loop to create as many circles as requested
for (var j: uint = 0; j < nImagesToCreate; j ++) {}
Place the circle in random posistions
obj = new P_Circle ('GetRandomNumber"(maxCols, this.padding),"GetRandomNumber")
Give it a name
obj. Name = "circle_" + j;
Add it to the container for the display
this.container.addChild (obj);
}
obj = null;
total sprite changes its size according to the objects that are on stage
trace ("width of the container: ', container.width");
trace ("height of the container: ', container.height");
}
private void getRandomNumber(upperLimit:uint,_lowerLimit:uint):uint {}
Get a random number of circles
var randomNum:Number = Math.floor (Math.random () * (1 + 10 - 5) + 5);
Return randomNum;
}
}
}
I don't think that the problem lies in this line, but even more with the function that precedes. The makeImages function seems to be misplaced brackets where the definition of the function ends just before the loop, which means that the loop is sitting in the middle of nowhere, what you can't do in a class file.
-
Error #1006 from a button function (HELP!)
I created a button and it evokes a MoveClip.
When the MovieClip is playing, it contains several layers including tweens in an information board located on the frame (10).
Attached to this information panel is a button.
In my ActionScript layer inside the MovieClip on frame (10), I write the code for the button to call the MovieClip to play through.
Here is the code:
Stop();
import the classes so we can make in our movie
import flash.display. *;
import flash.events. *;
import flash.display.MovieClip;
import flash.display.Sprite;
faucet_mc.addEventListener (MouseEvent.CLICK, faucetCLICK);
function faucetCLICK (event: MouseEvent): void {}
faucet_mc.gotoAndPlay (nextFrame);}
When I hit the button on the right side of the Panel, I get an error in my output panel:
TypeError: Error #1006: gotoAndPlay is not a function.
at::faucet_mc_2/faucetCLICK() [test1_fla.faucet_mc_2::frame10:12] test1_flaMy goal is to have the MovieClip to play through discoloration on the information panel that ends the frame (18)
and have the MoveClip to start return or stop to the framework (1)
I do not understand why my error message indicates that gotoAnd game is not a function.
How can I get it work?
You are welcome.
Please mark this thread as answered.
-
Collection as a parameter in the function - help needed
I have a function that returns 3 different values according to a given in parameter.
Now, I want to return these three values.
Instead of using three out parameters, how can I use a collection for return values.
Please tell me the best way that returning multiple values (more than 3)
Thanks in advance
Concerning
RambeauSQL> create type my_obj as object (no integer, name varchar2(10)) 2 / Type created. SQL> create type my_tbl as table of my_obj 2 / Type created.
functional approach...
SQL> create or replace function my_fn return my_tbl 2 as 3 ltbl my_tbl; 4 begin 5 select my_obj(1,'karthick') bulk collect into ltbl from dual; 6 7 return ltbl; 8 end; 9 / Function created. SQL> select * from table(cast(my_fn() as my_tbl)) 2 / NO NAME ---------- ---------- 1 karthick
procedureal approach...
SQL> create or replace procedure my_proc(ptbl out my_tbl) 2 as 3 begin 4 select my_obj(1,'karthick') bulk collect into ptbl from dual; 5 end; 6 / Procedure created. SQL> declare 2 ltbl my_tbl; 3 begin 4 my_proc(ltbl); 5 6 for i in 1..ltbl.count 7 loop 8 dbms_output.put_line(ltbl(i).no||' '||ltbl(i).name); 9 end loop; 10 end; 11 / 1 karthick PL/SQL procedure successfully completed.
-
Inverse trigonometric functions
Is it possible to calculate the inverse tangent, cosine and sine? The Math class has 'tan', 'cos' and 'Sin' but not 'atan', 'acos' or 'asin '. Is it possible to do it on the Blackberry?
Hello
Take a look at this
class net.rim.device.api.util.MathUtilities
-
Agrigate functions - help is needed, please!
WITH scheduled_events AS)
SELECT 1 AS sequence_no,
"At the request of available' as the object_type,.
30 AS duration_in_seconds
OF the double
UNION ALL
SELECT 2 AS sequence_no,
"At the request of available' as the object_type,.
45 AS duration_in_seconds
OF the double
UNION ALL
SELECT 3 ACEs sequence_no,
"Regular program", as object_type,.
1800 duration_in_seconds AS
OF the double
UNION ALL
SELECT the 4 ACEs sequence_no
"At the request of available' as the object_type,.
30 AS duration_in_seconds
OF the double
UNION ALL
SELECT 5 AS sequence_no,
"At the request of available' as the object_type,.
15 AS duration_in_seconds
OF the double
UNION ALL
SELECT 6 AS sequence_no,
"At the request of available' as the object_type,.
60 AS duration_in_seconds
THE DOUBLE)
SELECT * FROM scheduled_events;
I have a simple list of events to be broadcast. Now, I am required to provide their summary, grouped by Type of object, but in how to track,
based on the example above:
the first two rows are of type available, so the first line of my group by should be
1 (first sequence_no), should prevail (object_type). 75 (total in seconds for the first two records)
the third row is scheduling program, so it should be
3, regular program, 1800
and the last three lines are calendar to use again:
4, should prevail, 105
So the end result should be
1, Avail regular, 75
3, regular program, 1800
4, should prevail, 105
Is this possible?
Thanks in advance!
Published by: kdwolf on March 30, 2009 10:01It is a way
select min (sequence_no) , min (object_type) , max (secs) from ( select sequence_no , object_type , grp , sum (duration_in_seconds ) over (partition by grp order by sequence_no ) secs from ( select sequence_no , object_type , duration_in_seconds , sum (sog) over (order by sequence_no) grp from ( select sequence_no , object_type , duration_in_seconds , case when lag (object_type) over (order by sequence_no) = object_type then 0 else 1 end sog from scheduled_events ))) group by grp
and a complete example:
SQL> WITH scheduled_events AS ( 2 SELECT 1 AS sequence_no, 3 'Scheduled Avail' AS object_type, 4 30 AS duration_in_seconds 5 FROM dual 6 UNION ALL 7 SELECT 2 AS sequence_no, 8 'Scheduled Avail' AS object_type, 9 45 AS duration_in_seconds 10 FROM dual 11 UNION ALL 12 SELECT 3 AS sequence_no, 13 'Scheduled Programme' AS object_type, 14 1800 AS duration_in_seconds 15 FROM dual 16 UNION ALL 17 SELECT 4 AS sequence_no, 18 'Scheduled Avail' AS object_type, 19 30 AS duration_in_seconds 20 FROM dual 21 UNION ALL 22 SELECT 5 AS sequence_no, 23 'Scheduled Avail' AS object_type, 24 15 AS duration_in_seconds 25 FROM dual 26 UNION ALL 27 SELECT 6 AS sequence_no, 28 'Scheduled Avail' AS object_type, 29 60 AS duration_in_seconds 30 FROM dual) 31 select min (sequence_no) 32 , min (object_type) 33 , max (secs) 34 from ( 35 select sequence_no 36 , object_type 37 , grp 38 , sum (duration_in_seconds ) over (partition by grp 39 order by sequence_no 40 ) secs 41 from ( 42 select sequence_no 43 , object_type 44 , duration_in_seconds 45 , sum (sog) over (order by sequence_no) grp 46 from ( 47 select sequence_no 48 , object_type 49 , duration_in_seconds 50 , case 51 when lag (object_type) over (order by sequence_no) = object_type 52 then 0 53 else 1 54 end sog 55 from scheduled_events 56 ))) 57 group by grp 58 ; MIN(SEQUENCE_NO) MIN(OBJECT_TYPE) MAX(SECS) ---------------- ------------------- ---------- 1 Scheduled Avail 75 3 Scheduled Programme 1800 4 Scheduled Avail 105 SQL>
-
IsNumeric() function help
Hello
I have a table with the column type that
varchar.
The value of the column can be anything. Its inclusion
Numbers,strings,*,#,%.etc...
But I want to gee the values between the two
0 to 100.
So, I tried like
Select attribut2 in the story where
ISNUMERIC (attribut2) = 1 and cast (attribut2
as a whole), cast ('100' as integer) and
Cast(Attribute2 As Integer) > cast ('0' as
(Integer) - attribut2 <>100
Here
attribut2 - name varchar column
History - table name
It gives the following error "could not convert #
in int.
But I filter the column values by
ISNUMERIC (attribut2) = 1 in front of cast in
whole number.
Please someone guide me to solve this problem!
Thank you!!!Hello
You have three conditions in the WHERE clause.
The optimizer decides in which order they will be assessed. The position of 'ISNUMERIC (attribut2)' = 1 does not guarantee that it will be first evaluated.You can use a CASE statement to ensure that the DISTRIBUTION is made only after that isnumeric returns 1:
... WHERE CASE WHEN isnumeric (attribute2) = 1 THEN CAST (attribute2 AS INTEGER) END BETWEEN 1 AND 99
You can also consider doing a version of isnumeric that return the numeric value if the argument is a NUMBER, and returns null if the argument is not a NUMBER.
-
Need to write a function to help.
I'm using Oracle 11 g and SQL Plus. I am a complete newbie, so I need some help here in writing a function. I guess my question is more on the writing of trigonometric functions within the service.
latA, longA Banff, longB / / these are the four input parameters.
Theta = longA - longB
distX = sin (latA * PI / 180) * sin (Banff * 180 FT) + cos (latA * PI/180) * cos (Banff * PI/180) * cos (theta * PI / 180)
Gefrierschrank = acos (distX) / / this is arc cosine
distZ = Gefrierschrank * 180 / PI / / PI refers to the mathematical PI
distP = distZ * 60 * 1.1515; This value should be returned. Of course do not import the names of intermediate variables.
Help, please. Thank you.CREATE OR REPLACE FUNCTION fucntion_name(latA IN NUMBER, longA IN NUMBER, latB IN NUMBER, longB IN NUMBER) RETURN NUMBER IS pi CONSTANT NUMBER:=3.14159; theta NUMBER; distX NUMBER; distY NUMBER; distZ NUMBER; distP NUMBER; BEGIN theta :=longA - longB; distX :=sin( latA * PI /180) * sin ( latB * PI /180) + cos ( latA * PI/180) * cos ( latB * PI/180) * cos ( theta * PI / 180); distY :=acos(distX); --this is arc cosine distZ :=distY * 180/PI; --PI refers to the mathematical PI distP :=distZ * 60 * 1.1515; --this value should be returned. Of course the intermediate variable names don't matter. RETURN distP; END;
Published by: Ora may 3, 2011 23:46
-
Using trigonometric (sine, cosine) functions in Acrobat Scripting
Hello
I inherited a form of a colleague and would like to make some changes in one of the fields of output using a formula that includes arc sine and cosine functions. All scripts that are attached to the form fields use FornCalc but I couldn't find the arc sine and cosine functions in FormCalc. The manual mentions that the scripts associated with the form fields can also be written in javascript and research online, I found that this javascript has a function math.cos() and Math.asin (). My problem is that I don't know anything about javascript programming (and very little about FormCalc and XML) and would appreciate much help on how to write a script JS using Math.cos and Math.asin. The script is associated with the form field and the values used in the trigonometric functions are declared global variables and form using modified elsewhere FormCalc scripts. I use adobe acrobat 9 pro Presentation.
Thank you
Documentation of the designer LIiveCycle omitted some mathematical objects present in the whole XFA FormCalc spécification.
-
function Panel will help in html
My hardware of CVI Core 1 says I can create help in HTML for my fact instrument driver custom information. The following link mentions also that but I can't seem to get the HTML code to display. What I am doing wrong?
Hello Craig,.
Have you tried to stimulation of html tags at the beginning/end of help like this text:
This is my function help Detailed Help
Constantin
-
Problems of the inverse tangent function
Hello
I try to use the function trigonometric "arctangent", but it does not work because I think that it should. I want to change a gradient at an angle, normally on a calculator, I use height divided by the length and press the tan ^-1 (inverse tan) function and get the angle. For example, the inverse tangent of 1. 45 (degrees) If I use the inverse tangent function in Labview 2010, I get a completely different = 0.7853 result... I use it wrong or the function does not work correctly.
I've attached an example so that you can reproduce the result. I also had a similar problem with sin and cos in the formula of node structures.
Thanks for any help you can give,
James
Hi James
I have not seen your VI. I know, given out by the trigonometric functions in Labview is expressed in radians. You need to radian to degree conversion for the response under 45.
Concerning
Javed
-
Is a help in offline mode option available?
In HIS internet is sometimes slow or not available and expensive. A help option offline (such as available for example in LibreOffice) would be very convenient, but I could find one. Have I missed?
Sorry, there no function 'help' built-in to Firefox. Small one Firefox used to have was removed [as] 8 years ago or something close.
Maybe you are looking for
-
I am trying to export my address book in excel. I'm going to address book/tools/export. I chose the csv, the name of the file and click Save. The result is a file with the address book titles, but no data. Can you help me?Thank you!Nancy
-
Miss me the CLOCK of my new Pixie of Palm app. Reading that I need to move to the 1.3.5.1 webOS. I clicked on the 'Upgrade' and says it is downloading... sitting there forever. I finally gave up and turned the phone off and on again. Now when I go
-
can you neighbours usen your wireless connection?
I noticed that the names I know what some appear as network on my PC
-
Report Generation Toolkit missing VI
LabVIEW version 8.6.1 Report Generation Toolkit 1.13 I just started work on an ongoing project that others have contributed to during some time. (This is why the project being in older versions of LabVIEW) On my PC, apparently miss me VI "Word get A
-
My wireless home does not appear on as a network available on my work laptop and always did before. He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this. I know