HP 5520: Removal of cover HP5520

Similar Questions

• What screwdriver to remove the cover from the fan on satellite p10

  I'm lost as to what driver I need to remove the cover around the fan and the heat sink, my 10 p heating is now all the time and im hoping its because dust and dirt that has been vacuumed during the last year and a half, the screws, I open are a real star shaped screws not star philips normal like the rest of the screws on the unit, I hope that someone here can point me in the right direction as to where I can get one of these scredrivers... Thank you

  Hello

  Sorry, but your question is a bit ridiculous to me. Until you wait for a response from Google around or ask in some store Kit tools.

  My last laptop was Satellite P20. It's a bit larger similar unit but with the same screws. It is not recommended to use screwdrivers not original but I did. Please don t that, because of screw causing damage.

  Good bye

• How can I remove the cover for the printing of books

  Hello

  I just bought a 5510e Photosmart aio, B111a. It says in the manual that it is possible to print or scan books by unscrewing the lid. But how do you go? Seems I have to resort to violence!

  Hello I am

  I rechecked everything on the device. As in the image, press the left side of the back cover with your thumb. The lid should unclip. The first time the cover can be a little stubborn. After that the left side is out you can push the cover to remove the cover on the right side.

• Remove the cover of my MacBook Pro, I saw a black residue under places of my Fans. What is it?

  I just removed the cover of my 17 "mid 2010 MacBook Pro to replace the hard drive!  I see that black dust has settled under the two locations of cooling fans, on the cover.

  It seems to be a micro-fine DUST, color dark Siver.

  1. Is it debri met fans?
  2. Can I use a Microfiber cloth to remove safely? and
  3. How it is there?

  Please check, as I don't know if it's to worry about.

  Is it debri met fans?

  Yes

  Can I use a Microfiber cloth to remove safely?

  For text detailed and video instructions on how to clean the fans, visit You Tube and iFixit tutorial.

  • How it is there?

    Dirt can also get inside a computer because it has vents.  Fans can also attract the dust bunnies inside the computer where most settle on fans.  To answer your question - air and the environment around your computer.

  

• Remove the cover desktop (Acer AM3970)

  Maybe a stupid question, but it comes to remove the cover.  I removed all the screws that hold it and I can't move it.  I don't want to pry and bend the case that makes anyone who has an idea of how I can remove this cover

  Hello janlarmil,

  1. You remove the screws (x 2) in the upward motion
  2. You slide the Panel towards the rear of the chassis (press with your hands and slide back)
  3. That's all!

• HOW TO REMOVE THE COVER FROM THE PAVILION 21.

  I watched the tutorial to remove the lid of the HP Pavilion 21 and indications are not applicable to my unit.  This is a lock down at the bottom of the unit once the screws are properly loosen, there is no lock.  I see a labeled hole lock but by placing a flathead screwdriver in the hole has not yet authorized the cover be released.  How do I release the lid without damage to it?

  Hello Austex,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you try to remove the cover of your HP Pavilion 2 and have problems with it. I'd be happy to help you, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. Because with that I can give you accurate information.

  How can I find my model number or product number?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• When I down loaded Lightroom 6 of the disc is not remove or cover on my older Lightroom.

  When I down loaded Lightroom 6 of the disc is not remove or cover on my older Lightroom.

  Each version is independent, then a new installation of version is SUPPOSED to overwrite or replace an old version

• Studio XPS 8100 - how to remove the cover of the modular Bay?

  I would remove the plastic cover of the modular Bay on the front of my venerable Studio XPS 8100 so I can install a USB 3.0 3.5 inch hub instead. However, I can't find instructions for it. In fact, I can't find any description of how to use the modular Bay.

  To start: how to remove the cover plastic modular Bay?

  Also: If someone has found the instructions on how to insert a player or another device in the modular Bay, I would be glad to know where I can find them.

  Hello rdunnil

  I took off the glasses and I saw how the metal plate is attached. Applying light pressure with a screwdriver flat head will do the job. Exchange on USB 2.0 ports would also work: I found directions for the removed from their metal case. Whatever it is, I'm all set. Thank you for pushing me in the right direction. It is much more valuable than the useless, generic link you gave me.

• Removal of cover of book of FM in RoboHelp 7

  I use RH 7.0 to the Suite of TechComm 1.

  I added the FM books of reference and in the process, the book cover is also added.  Is it possible that I can automatically eliminate the cover whenever I have generate, or what I need to remember to remove the cover of the project every time?

  Thank you.

  Your options are:

  1. Remove the FrameMaker book coverage file.
  2. Delete the subject of the cover of the book of your HR project before you build.

  A third option might be to add conditional text to the cover of the book on the FM band. I'm afraid that my knowledge of FM's summary but conditional text should be harmonized in the whole HR.

• Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

  Hi all

  I have a Satellite L70-A-139 youcef.
  And at the back of the laptop, there is a cover that is fixed with a screw.

  Wil I void the warranty when I unscrew and take a look?
  I want to upgrade my HDD to SSD.
  The motherboard supports Sata III: D.

  Thank you!

  No, the mandate must still be valid.
  There is a removable cover at the bottom of the unit as shown here:
  [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

  Then you should be able to upgrade the RAM and HARD drive.
  I think this info should be mentioned in the user manual too.

• Remove rear cover to find the drive hard hp pavilion 10 touchsmart laptop

  I have a Hp Pavilion Touchsmart Pc e010nr 10 (this is a mini) well it was thrown to the ground by my 2 years and when I went to turn it on, it says please install an operating system on your hard drive, then it allows me to go to diagnostics of material where it gives me a memory test option an option to check hard disk. When I selesct the memory check option it passes check memory and when I select the disc hard checkit nsays its not installed. So my question is how do I remove the back cover so I can make sure that the hard drive is secure? His portable regulars not like who r easy to remove the hard drive. Can someone help me please w one link or a video or instructions on how to remove the rear handle to check if my hard drive did not have kocked loose when it was launched? Thank you very much

  Hello

  Unfortunately, the HARD drive is not the best thing to do in your model in particular (you need to remove the top cover and the Assembly of the speaker), however the procedure is detailed from Page 52 of your maintenance & Service Guide.

  Kind regards

  DP - K

• How remove plastics cover Satellite M70-166 and replace the lock?

  I need to buy an another cover for my Satellite M70. However I don't know if I can manage to remove the old cover and put a new one.
  I have the opportunity to purchase a cover without a lock, so I need to change my old damaged cover one lock.
  It's easy to do it by myself (I mean change the cover up and change the lock)?
  Do I need some special tools to do?
  Thanks in advance to answer.
  Anna

  Hey Buddy,

  If I were you, I am looking for a technician because it s not so easy to exchange these parts around the LCD. The problem is that the stuff is very well suited and you don t know where all the screws might be.
  Just a suggestion: Don t do it on yourself, prefer to give someone who is familiar with laptops and has some experience with the dismantling of these mobile systems of the machine.
  But if you are really sure that do you it on your own, then just google for your machine, because there are several forums where users are showing the dismantling of their machine so that other users can easily do the same. But beware, if you have always guaranteed, then you will lose it at the opening of your machine.

  Welcome them

• Can I remove the cover of HDMI port?

  I want to connect my laptop to my new tv, but the hdmi port seems to be covered by a plastic cover. If possible, how can I remove it? Help, please!

  It was a doorbuster of Wal-Mart a couple Black Friday there is and does not have a HDMI, like some other G71s port.

• How do I remove the cover upper dv3505

  I need to replace the rtc battery in my DV3505. I followed the instructions of the interview guide and got to the point of p60 to remove the top cover where it is said:

  It takes a bit of gentle persuasion. A fingernail or a plastic spatula between the hood and the lip of pregnant even better base, must turn it on. Once it moves it Peel like a zipper.

• Remove the cover on all in one office

  I have a desktop HP all-in-one view 20. I can't get the back cover off to add ram. I have the 2 screws and the cover rises about 1/4 ", then that's it. I noticed a small hole in the lid that has a "lock" symbol Is there a tool to unlock the back cover?

  Thank you. It does not help. You own a HP ENVY 20 - d117c TouchSmart all-in-One desktop PC.

  As you loosen the two screws, turn each him until you hear a click five times. This means that they are completely loose.

  From the edge of the lid near the base, lift the back cover upwards and remove it.

  There is a video that I watched to see how it does, but it is a place that I can't provide you with a link to access.

  Best regards
  ERICO