HP 620 DC Jack replacement

I'm looking for a replacement DC Jack for a HP 620 notebook. Can someone point me in the right direction?

You can a source online via Google. This is some very inexpensive.

I did a search at the following ADDRESS

https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=HP%20620%20DC%20Power%20jack

Tags: Notebooks

Similar Questions

  • Jack DC on Satellite L450D Jack replacement

    Everyone had the Miss fortune to try to have the replaced dc Jack? (L450D) Well, I tried to get a repair, and the answer I got was that I need to replace the motherboard on a computer that is 6 months old! is this right? the plug is installed in the base and connected by a wire to the motherboard, yet "Topaz" & Toshiba say his integeral to the motherboad, I disagree!

    I would assess any opinion someone elses on this subject, I have to pay £300 for a new motherboad or fighting for the right to buy a new DC socket for a few pounds?

    I look forward to your reply... jon

    Hello

    I think that the guarantee must be valid because the L450D isn't very old book and standard warranty covers all material parts a year full for a long time.
    I think that you should get in touch with a local authorized service provider in your country that could fix this guarantee must cover all costs

  • ThinkPad W530 Power Jack replacement

    Hi, I am trying to replace the seizure of power in my W530 and I encountered a small problem: I can not actually to the power jack on the case. I disassembled the laptop to the point where I can replace it, but I can't actually making itself, it seems to be stuck in the extreme. Snyone there advice on how to get out the power supply? I already have the ready to go spare. Thanks in advance.

    It is not glued. It is screwed from the bottom of the frame of magnesium. The framework must be removed from the base

  • On Satellite L500 power jack replacement

    Hello

    I have laptop

    Toshiba Satellite L500-11V
    part no: PSLJOE-OOROOJEN

    The power Jack is broken. I do not weld. If I buy the power supply with cable can be installed in this laptop as the seller has mentioned that the welding is not necessary.

    Thank you

    Maybe something stupid, but now you take it all laptop without maintenance manuals?
    I mean the disassembly procedure must be performed as a result of specific measures to avoid damage of portable equipment. Can fix you only?

  • Screen blue - Stop error 0x8E

    Here is my blue screen error: BCCode: 1000008e BCP1: C0000005 BCP2: BF83D79B BCP3: B6DD0830 BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1
    It is an old Acer running Windows XP. I've recently updated the hard drive and video card (new G-Force, 512 MB DDR2 DVI TV 620). This replaced a G - force 4 MX4408X 64 MB DDR TV Out.  It wasn't great before the updates to work but works worse now.

    HAL

    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    If you are overclocking reset all default before running these tests.
    In other words STOP!

    1 - Memtest.

    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

    * Boot from the CD and let it run at least 5 or 6 passes.

    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

    Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.

    If a well-known stick fails in a slot of motherboard, it's probably the slot.

    http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    So, here is the procedure:
    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    Select all drivers that are NOT provided by Microsoft, and then click "Next".
    -On the next page, select "Finish".

    Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
    http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

    Further reading
    "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

  • Re: Hum of helmet

    Just out of curiosity for those who have had the same problem as me with sounds ringing in their helmets, here are the details of my remedy that seems to have solved the problem

    Error description: distortion Audio Sound

    Description of repair: Audio Jack replaced

    Replaced parts: USB_Audio Sub Card

    Thanks to the service of lenovo to solve my problem and people are of course when you return your laptop from lenovo your repair is the same as mine

    Thank you

    I had the same problem and the same solution.

    Thank you.

  • Can satellite 2410-504 - I replace headphone jack card?

    Hey

    Stupidly, I hit my laptop when I had headphones plugged in and broke something.
    Now my laptop think headphones are permanently connected and won't play sounds through the built-in speakers.
    I tried searching the Web to find a replacement headphone jack card, but still I had no chance.

    Anyone know wehre I can get one?

    your

    > I tried searching the Web to find a replacement headphone jack card, but still I had no chance.
    You want to replace the headphone jack online?
    I doubt that you will be able to do this because something like that does not exist.
    Microphone and headset is part of the motherboard, and if something was wrong with the ports/Sockets then in most cases you will need to replace the motherboard.

  • Replacement of power on Satellite L750 jack

    Hello!

    I would replace the power plug in my laptop, but I don't know which one I'm supposed to buy, I was checking on ebay, amazon, but I couldn't find my model. My model is Satellite-L750-1XH.

    Please help me and tell me where I can buy it, I'm from London.

    Hello

    I think you should be able to use a power supply (jack DC) out to Satellite L750 / L750D series.
    But if you will not be able to get this part of independent reseller, I recommend you contact the Toshiba authorized service partner in your country.
    Guys are able to provide all the compatible parts for your device.

  • X 230 starts does not after replacing dc jack

    Hello everyone, I've replaced the dc Jack by the following materials repair manual, but the laptop does not start (zero response when you press the power button / stop) later. When the power adapter is plugged in, the battery light flashes three times, because of connection.
    My suspicion is damaged key board or could be the motherboard. Please advise on how to continue. Backup battery is has nothing to do with the starting of computer?

    In your case. There is a high probability that something is wrong with the keyboard. But it could be something else.

  • Replacement 250 GB C: drive in Dell Optiplex GX 620 with WD 750 GB SATA drive by cloning. BIOS sees the drive, Windows XP does not work.

    I have 5 Dell Optiplex GX 620 desktop computers.  All are about 5 years old.  Had a hard drive failure so I replace the disks C: by secondary SATA disk cloning, disk 1 in the bios.  BIOS sees drive when Windows XP on two systems and not on the other three.  Have no idea why.  All rooms have all the updates of Windows and Dell. A bought WD Caviar Green drives.  WD has replaced three with Caviar Black readers and still does not work.

    Level 2 support WD had response which was to creat Acronis True Image WD Edition BACK boot CD for the windows version of the software, (that I downloaded on www.wdc.com), boot to a CD and had the disc I cloned then.  I wish only the support level 1 guy was aware of this utility.

  • Replace it with a bigger hard drive on HP 620

    I need a bigger hard drive on my laptop computer product for laptop HP 620, no #UUW WT249EA, serial no CNU1060PR9. It is originally equipped with a 320 GB SATA II HD. I want to install a 500 GB and, if possible, a 1 TB hard drive. I'm looking to

    HITACHI TRAVELSTAR Z7K500 2.5 "500 GB 7200 RPM SATA/600 Buffersize 32 MB and

    HITACHI TRAVELSTAR 7K 1000 2.5 "1 TB 7200 tr / MIN SATA/600 Buffersize 32 MB.

    Both drives are SATA III and the original drive is SATA II.

    I tried to work if my laptop can handle a larger drive, but the information I can find is contradictory. I'm very grateful for any help!

    PinguThePenguin

    If it will take a 500, there will be a 1 to and Yes, do not try to buy the hard drive for HP. buying a retail source for reasons of price. If you buy a 1 TB drive and it doesn't work I'll buy it from you at a cost, I'm sure it will be fine.

  • HP Pavilion e049wm 17: 17-e049wm (HP pavilion 17) can I replace the audio jack on the motherboard?

    Hello

    Nearly two years ago, I bought the laptop and the audio jack stopped working. I opened the laptop and saw that indeed broken taking!

    I wonder where I can get a new, so maybe I can solder on the motherboard?

    There is no place to buy this decision in a separate part. The only possibility is to find a motherboard nonworking parts on ebay and to transplant the good audio jack on your motherboard, and I don't want to minimize welding skills that will. You'd be very likely to damage the motherboard still more. Your best bet now if you want to use the laptop with a gaming headset is to get a cheap usb sound card and plug it in when you want to listen in private. I guess that the speakers of the laptop still work OK?

    Like this:

    http://www.Amazon.com/virtual-5-1-surround-external-sound-card/DP/B000N35A0Y/ref=sr_1_5?ie=UTF8&QID=1457963711&SR=8-5&keywords=USB+sound+card

    You could buy half a dozen of them, then you might lose a bit and still be OK.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Replacement for laptop power Jack

    I have a laptop

    s/n [number of Series edited by Moderator]
    p/n GS817UA #ABA
    service tag dv6647nr

    The entry on the laptop power socket is wobbly. If you touch the power cord of the power supply you can turn off the power to the laptop.

    I have 2 questions:

    #1 do - that I have a HP Pavilion dv6500 or a dv6647nr? The reason why I ask is because spare parts are different between 6500 and 6600 series.

    do I need an assemblage of spare 65w or 90w a #2?

    Hi @wjell ,

    Thank you for visiting the Forums from HP Support. I needed to edit your post and remove the serial number. In accordance with our rules of Participation:

    Protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.

    If you need people to contact you directly, or ask them to send you a private message, or subscribe to the discussion then you will be notified when there are replies. You can also click on your name anywhere in the forum and will take you to your profile page, where you can find a list of threads, that you participated.

    Sharing personal addresses, telephone numbers and family names not suitable for your safety. If you have any questions, feel free to send me a private message in response.

    Thank you
    George

  • Portege R100 - defective headphone jack

    Headphone 3.5 mm on my R100 hole seems to be defective (I tried it with another helmet and with them the sound is distorted unless I managed to get the plug in the right position).

    I will provide Toshiba on this subject shortly, but I was just wondering if anyone could tell me if this component replacement is a simple procedure?

    Thank you very much.

    Hi Dan,.

    The headphone jack is a pretty basic device that can usually be bought quite cheaply from most electrical spare outlets. The real problem is to find a repairman that will repair to the component level. Nowadays, the trend is to replace a whole PCB rather than simply weld on a new component.

    According your description of the problem as it sounds as if we spring metal tags is either loose or bent and therefore does not sufficiently wityh contact the helmet when it is inserted.

    If your laptop is still under warranty, then it should be replaced at no charge.

    If your warranty has expired, it may be useful to check for repairers of local PC that quote ' component-level) repair services.

    Good luck

  • Satellite R830 - replacement taken helmet

    Hello

    Ive had an accident that involved the laptop falls on the ground with the headphone jack plugged in. the rest of the laptop seems ok, but put a plug in the socket does not prevent the speakers works and audio coming out it sounds ringing; Looks like the stereo is cancelling which means that something has shorted out.

    not sure I want to open up the laptop immediately; but it seems that catches jack can be replaced. I think that its still under warranty, but the accident was my fault.

    any thoughts? where can I get spare parts for?

    Thank you very much
    James

    Hi James

    What you can do is to use Google and search if you can find replacement parts but I'm pretty sure it can be quite complicated. Also, the repair is not so easy. You want to do it alone?
    I mean the dismantling procedure is also quite difficult and must / should be done by authorized personnel only. Small error can ends with coins in plastic broken and different media.

    In my opinion you should not do these things. Buy the small Audio USB w/Mic Jack adapter and the problem is solved.

Maybe you are looking for