HP 6500 has more don't scan two-sided

Similar Questions

• OfficeJet 6500 has more than 710: scanning problem - can't do PDF

  Recently connected my all-in-one to a Pavilion 23 all-in-in-One and no longer offers me PDF (incl. multi-page) as an option of - limited analysis in format BMP, JPG, PNG, TIF - tried to download new drivers, but that the process hangs out with a message that I maybe not sufficient authority to go forward (?) - offers a new attempt, but again the same problem : can anyone advise as to how I can go back to the "good old days" when I could easily scan a multiple page PDF?

  Hello

  What is yourx E710? Please try: download the following file and install it on your computer first. You will have to perhaps after return of the right x of your printer:

  http://ftp.HP.com/pub/softlib/software12/COL34830/MP-109384-3/OJ6500_E710n-z_1315-1.exe

  Kind regards.

• Why can't my 6500 has more scan/file more than one page at a time?

  Why can't my 6500 has more scan several pages at a time?  I tried to scan a three page article.  Each page must be analysed individually and saved as an individual file.  Very frustrationg.  And, of course, there is no manual to follow or refer to.  Thanks to someone out there who might know the answer.  Happy days of the Turkey.

  Hello

  Please see the link below for how to scan multiple pages one.

  http://support.HP.com/us-en/document/c00018775

• OfficeJet 6500 has more - Scan-to-Computer tasks can be reorganized or renamed?

  I have a HP OfficeJet 6500 has more (E710n-z) and have implemented the Scan of the computer which works very well.

  When I turn on the scan-to-computer of the screen of the printer, there are six different choices for the analysis-'Save as PDF,' 'Save as JPEG,' etc..

  Three appear on the first screen, and I have to scroll down to get over the next three years.

  My Questions are:

  1. Is there a way to rearrange the scan tasks so that I can change which three appear on the first screen of the printer?
  2. Is there a way to change the names of the tasks of the computer analysis?

  I'm on a Mac running (OSX 10.8.2) Mountain Lion

  Sorry, there is not a way to change the order on the display of the scan task.

  Also, you cannot change the name of the actual analysis to the task of the computer. The only thing you can change is the name real analysis of the case, sorry.

• HP Office Jet 6500 has more scan to desktop

  I have a HP Office Jet 6500 has more with a Scanner. The printer works ok and I can run it from an icon on the desktop.  However I can understand how to get a workable icon to the scanner link.  I have recently installed Windows 8.1

  Yes, I can reach him through 8.1, but it has a different, less flexible interface.  I also get assistance from HP print and Scan doctor.   But it's a lot of time. Help please.

  Hello Krajewskit,
  Welcome to the HP Forums.

  It seems you are trying to find an easier way to access the scanner for your printer software after upgrade the computer to Windows 8.1. I will try to help you with this.

  Condition that after update the software of the printer is still installed and working properly, there should be some options to make it easier to use the HP scanning application.

  You can if you want to uninstall and reinstall, here is the link of the software: HP Officejet full feature software and driver.

  Provide the software is installed correctly, you should see an icon on the desktop that resembles your printer. If you click on this (called the HP printer Assistant), it will open a window where you can access the scanning application from. If it is not on the desktop, you can check you printers folder for the same icon. The software is not installed correctly, if it does not work.

  You can also add the HP Scan application directly on the desktop.
  to do this go to the screen type start 'this PC' or 'Computer' you should see an icon developed for either clicking on it. From there, go towards the local disk (c :)), now in the program files (x 86), find the HP folder. Once here, there should be a folder for your printer, open that folder. There should be a 'bin' folder that opens. Here, you should see an icon for HP Scan. Right click on that, and you should have the ability to send and then create desktop shortcut. This will give you what you are looking for.

  Hope that helps you out, please post on the Forums of HP.

• How can I send a scan of my computer? HP 6500 has more windows 7

  How can I send a scan of my computer?

  HP 6500 has more

  Windows 7

  Hello

  You can download the manual from the following link:

  http://h10032.www1.HP.com/CTG/manual/c02519721.PDF

  Kind regards.

• HP 6500 a Plus: HP 6500 has more won't copy

  This old all-in-one device has served reliably for many years until today.  It prints and scans but won't copy glass.  I unplugged the wall for 30 seconds and then tried a second time with the same results.  Help!

  Hi @nsbguy,

  Welcome to the Forums of HP Support!

  I see that you have problems of the flat bed scanner glass copy on your printer HP Officejet 6500 has more. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that this printer has been very reliable for you, which is nice to hear. I see that you are able to print and scan, but they are not able to copy from the glass. I guess that when you scan using the ADF?  If the printer is capable of scanning, it should be able to copy.

  To try to determine the cause, I will need more information.

  • Are you able to scan using the glass flat?
  • What happens when you try to copy?
  • What is the error message that you receive?
  • Are you getting what output it, or is it empty?
  • What you're trying to copy?
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would also try to update the firmware of the printer. Click here to download it.

  In the meantime, to help determine the cause, try the steps outlined in this document, HP Officejet 6500 has e-all-in-one printer series (E710) - copy and Scan outputs are completely black.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

  HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

  Thank you.

  Hello HPAllinOneSande,

  Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

  ' Original jam: clear jam and press OK "Message displays on the all-in-one

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• How to fax multiple pages at once with the HP 6500 has more

  How to fax multiple pages at once with the HP 6500 has more.

  I don't know why I can't do this, it sends do not ask if you need to scan another page.

  Your device contains a document feeder, the sending of several pages of the Scanner glass is not supported.

  Simply place the pages face up on top of the document feeder and send the fax, as shown below:

  http://support.HP.com/us-en/document/c02299537

• OfficeJet 6500 has more on windows home premium 7 ad-hoc connection loss

  OS: windows edition Home premium 7

  product: officejet 6500 has more

  We organize a festival and everyone has a mobile phone that needs to print to the printer...

  We don't have a network or a router and try to connect 6 ad-hoc laptop computers to the printer...

  I managed to install the software on three laptop computers and a print ad-hoc wireless, but now he says that he does not find the printer over, even though the wireless network connections that the pc is connected to the network HPE710n.E5E3C5...

  I can't connect to the http://169.254.227.197/ (printer server) of this laptop...

  so he went completely downhill...

  on this laptop, I was able to print a page...

  on three laptop I was also able to print a page...

  but now he also says he «cannot communicate with the printer...» »

  is ad-hoc only for a laptop at the same time?

  What solution do you propose?

  can we do a completely wireless network with utp cable wireless router? and do a homegroup? and connect the printer with utp?

  is the special designed to accept prints six different cell phones at the same time?

  Thanks for any solution! We need it's really bad!

  With ad-hoc connections, it is really intended more for printing in a pinch without going through the hassle of setting it up on a network.  Or, you have two computers and you have connected it via USB to an and a laptop which is wireless, you can print via ad-hoc of the laptop.

  Honestly, I recommend picking up an affordable standalone wireless router (Netgear, Linksys, etc.) and connect the printer (wireless or Ethernet, does not matter).  From there on, connect the computers on this network and you should be able to install and print without any problems.  You can find the router could be useful beyond just this configuration or may be good to have if you plan to do events like this on a regular basis.

  The printer itself is not a router and communicting with multiple devices simultaneously may create congestion in causing connection problems similar to what you experience when you use ad - hoc for as many devices.

• Win7 x 64 install an Officejet 6500 has MORE. Cannot print

  Win7 x 64 install an Officejet 6500 has MORE. Printer is connected to the wireless very well. Win7 x 64 computer can ping and see the printer on the network.

  Get a message error everytime I try to print saying: "it cannot connect to the printer.

  Same computer can connect to the printer and to view and modify settings wireless very well.

  I guess it's a problem with Win7 x 64. I need to fix this before to decide to take back to Costco and exchange for the Canon I almost branch instead. HP you have always had driver problems, but still? Really!

  Has taken over the crappy HP. Picked up a Canon PIXMA MX882 instead. Impeccable installation, in 10 min I'm printing, scanning, fax wireless with not a single question.

  I am VERY disappointed with HP and its incompatibility with Win7 x 64 drivers. Don't advertise your crap software is compatible, when it is not! I lost hours of my personal time, trying to get HP to work then most of time taking the piece of crap back (I really like the hardware of the printer - software "guys really?"). I will never buy another HP printer. And on the Canon Wireless Setup was easier. A button called easy set up on top of the printer and BAM done. * beep * HP, * beep * indeed.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• OfficeJet 6500 has more - copy

  How can I copy from an original two-sided and a double-sided copy?

  Hello

  The Officejet 6500 has more provide the duplexing only.

  The duplexer to this model provides no ADF Suplexing options.

  You can find the specifications below:

  http://www.shopping.HP.com/webapp/shopping/store_access.do?template_type=product_detail&product_code=CN557A%23B1H&JumpID=oc_r1002_usenc-001&lang=en&cc=us

  SS, maybe you'll see, impressions recto only are provided.

  Kind regards.

  Shlomi

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.