HP 6500 Wireless E709E: The printer does not print in black

Similar Questions

• Volume/Mute, MediaSmart, control the volume and the buttons of LAN wireless outside the computer does not.

  I have problems with my Hp Pavilion Windows Vista computer. The main buttons that are used for volume control, button shortcut MediaSmart, mute and LAN wireless button that are all on the upper part of the keyboard next to the power button do not work. I tried to restart manually, using the Application of Service used a different sound card, and reinstall but nothing works. The volume control goes up and down by itself if you tap the volume control box or not. Help, please!

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  Ask in the Forums of HP as it may be a known issue with HP products, or they can advise how to enable them.

  See you soon. Mick Murphy - Microsoft partner

• 114 the desire does not connect to Asus all-in-one wireless but connects to the wireless network

  I just bought my HP ENVY 114 e all-in-one last week and I tried to connect it to my computer (Asus all-in-one Windows 7 64-bit) and while he wil connect to my wireless very well my computer (or my cell phone which is also an Asus running windows 7 64 - bits) cannot identify it.

  Using the disc doesn't help nor did try manually to add in 'Add printer' in my computer and all the interest to get this particular printer was because it was wireless. If I have to plug in a USB key then I have saved money and bought a less expensive model. All my devices are on the same network, and their firewalls is turned off so that it does not hinder the process.

  When you browse the drive Assembly he asks the IP and I get it exactly as it is on the screen printer that I even printed it out and double checked 5 times and it was exactly the same, but he keeps asking for me to be reintroduced to it since the computer cannot identify the printer.

  Any help would be great I prefer not to have to pack up this thing and take it back...

  Unfortunately, the router and the printer do not get along at this stage.  The IP address changes too often and it is possible that the router has its own firewall.  A large number of firewalls, outside the Windows Firewall, sees a lot of traffic from hpnetworkcommunicator.exe and blocks preventing the software to find the printer.

  I saw this model of router and it doesn't have a built-in firewall.  Unfortunately, I could not see their manual without you register on the site.

  It may be preferable to set a static IP address for the printer in the router's routing table.  To do this, you acceding to EWS the router.  If you don't know how to set the printer's IP address in the router, you can try to contact the vendor of the router.

  Otherwise, I would recommend checking the firewall of the router.  I saw a router cause problems with an overactive firewall in place.

  If you happen to have an extra router around, you can try to use it instead of Paul's to confirm that it is the router.

  EDIT

  You can try to put a static IP address on the front of the printer.  I'm personally not too successful with setting a static IP address on the front panel when the SAP does not load, but this could be one of those cases where it does not.

  First, print a Network Setup page by going to Configuration > Wireless > Network Configuration > print Network Configuration.

  Then, go to settings > network > IP settings > change to the manual.

  Once it is replaced by the manual, it should allow the IP address, default gateway and the subnet mask.  Use the subnet mask and default gateway of the print network configuration.  Use an IP address that is not in use on the network.  You can change the last number of the IP address on the print.  For example, 192.168.1.50 could be converted to 192.168.1.250.

  Setting a static IP address on the front panel does not set servers DNS which is necessary for ePrint operate on this printer.  Now that the static IP address has been set on the front panel of the printer, try to access the SAP by entering the IP address that comes to be defined in a browser address bar.  If the printer load, you should be able to set DNS servers and be ready to go from there.

• HP Officejet Pro 8600: Recently a fax pops up when I try to print photos and the picture does not print

  We have a printer all-in-one HP Officejet Pro 8600 operating from a desktop HP with Windows 7. Recently, in the last two weeks my wife told me, we cannot print photos. The documents appear to be printed without a problem, but when trying to print a photo we get a window titled 'Send Fax - HP Officejet Pro 8600'. We have never used or even hung fax capablitly since we have owned this printer (maybe 2-3 years). All of a sudden, this window is displayed when we try to print a photo and the photo does not print.  I can't tell you that my wife did not hit accidentally a wrong button somewhere down the line, but she says she does not. I tried to attach a screenshot of the window, but for some reason that it does not take it. It's probably something very simple, but technically challenged myself, I can't understand. Help, please.

  Thank you

  Vince Pellerito

  Print picture of what program?  Some programs to keep their own default values for the printer.  It seems that the default printer for the printing of the photo program has been set to Fax.  Try to open the program, select the Officejet Pro 8600 as the printer rather than the Officejet Pro 8600 fax.

• What impression of recipes, photo prints, and the name, but the recipe does not print. I heard do that before, but not of Noah

  What impression of recipes, photo prints, and the name, but the recipe does not print. I heard do that before, but not of Noah

  Hello

  OEM for the printer manufacturer is responsible for the proper functioning of the printer
  and their drivers. Check with the printer manufacturer's support, their online
  documentation and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  ================================================

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Diagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
  https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  -------------------------------------------------------------------

  Windows 8/8.1 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8/8.1 - How to solve printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8/8.1 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8/8.1 - set or change your default print
  http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printer

  Windows 8/8.1 - device drivers - print & drivers
  http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3

  -------------------------------------------------------------------

  Windows 10 - Fix printer problems<- printer="">
  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Supported Windows 10
  http://Windows.Microsoft.com/en-us/Windows-10/support

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Body of the email does not print in Outlook Express

  Body of the email does not print
   
  I had this same question posted under Outlook but was advised to post it under Windows...
  I use windows xp professional outlook express and the body of the email will not be printed.  The printer works well with other programs and the title of the print emails.  I does not matter if I try to print starting from the preview pane, or open the email and try to print from there.  All the settings are the same as they were while he was working.  We use a printer HP Officejet Pro 8500 has.  I have forwarded this email to my son who also uses xp and outlook and print with all the problems.  I made a diagnosis on the printer and it says it's in good working condition.  From now the only way to print an email is to copy in word and print it from there.  Any thoughts?

  Hi mriddle27,

  You can check if the following is useful.

  Method 1: Clear the Auto-select option for encoding.

  a. open the message.

  b. click view in the menu bar.

  c. point to encoding , and then clear the auto-select Option.

  Method 2: You can try to repair Outlook express and see if it helps.

  An Outlook Express basic repair kit

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Highlighted in the documents does not print.

  My HP309g works fine except the underscore in the documents does not print.  I use Word 2010 and Word Perfect X 4.  My OS is Windows 7 64 bit.

  Hello Pamelia

  Which application use? Have you tried to use Wordpad or another application with highlights?

• Printer all-in-one HP 5520: document in the queue does not print

  Printer all-in-one HP 5520: Document in the queue does not print

  Hi Anita,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, you are having problems with printing.

  1. do you get an error message when you try to print?

  2. is the problem with offline or online printing mode?

  Perform the steps in the link and check.

  Why can I not print?

  Meet us if you encounter problems while printing or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

• The Microsoft Wireless mouse right button does not work

  The right button of the mouse on my Microsoft Wireless Mobile Mouse 4000 does not - at first I thought that it was a hardware problem, but when I used the mouse properties/control panel to change the buttons on the mouse, the right button worked and the left mouse button does not, which leads me to believe that it is related to the software/driver.
  I have the latest version of the driver/Intellipoint software.  I am running Win 7 32 bit on a Lenovo ThinkPad T410.
  Change the port USB did not help; the problem persists, no matter which USB port I use for the receiver.
  Reinstall the software Intellipoint also did not help.
  It is a recent issue; I had the mouse for several months and it has worked well upward until a few days ago.
  Googling the problem that leads me to believe that it is a common problem, although most people seem to think it's a hardware problem.

  Hello

   
  Run the Fixit described in the article:
  Troubleshoot a wireless mouse that does not correctly
  
  http://support.Microsoft.com/kb/321122
   

  I also suggest you to remove the batteries in the mouse and keep it idle for 10-20 minutes. Insert the batteries and check it out.

   
  See also:
   
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   
  I hope this helps.

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.