HP 6940: Print on canvas

I want to make reproductions on canvas.  All the instructions (not HP) to do say to feed the canvas through the back of the printer (power supply on the back).  My printer has the two automatic sideed printing module attached to the rear of the printer.

I don't know how to remove the module; but before going further, I would like to have input on the power supply through the back of the printer.

Hi Kisitew,

Due to the design of this printer, you will not be able to use the paper back feed for food Web.

Best regards!

Tags: HP Printers

Similar Questions

  • Can I print on canvas of the HP Officejet 6500 printer?

    I want to print on canvas paper. I don't know if my printer model (it's a Scanner printer Officejet 6500 Fax) is compatible.
    In Print Options, I don't have the option of canvas. I looked for HP paper canvas online and is that big rolls that are too wide. I was wondering if I could buy paper canvas of another brand and would it work?

    Hello

    ================================

    Probably best to check with HP, their documentation online support and ask in the forums of HP.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Print on canvas

    I am looking to buy a plotter to print on canvas, I try to experiment at this stage and found a hp designjet 1055cm for a good deal and want to make sure that I'll be able use canvas with her.  So my question is can I print on canvas with the HP Designjet 1055cm printer?  Thank you very much.

    The tracer is great printer but is only 4 colors, and canvas sometimes need more. see HP Designjet that Z2100. This plotter came with 6; 8; or 12

  • HP Deskjet 6940 printer drivers

    Is there a print driver for win8.1 for the HP Deskjet 6940?  If this isn't the case, fits in the works?

    This printer has only a driver update in Windows 8 and 8.1. Please follow the steps outlined in the document link below to install it.

    http://support.HP.com/us-en/document/c03460648

  • 6940 printing eratic

    My Deskjet 6940 is weird. It allows to print the top of a page normally and then the lower 3/4 of the page in red tones. There are no lights or error messages. Color cartridge is a few weeks old. Black basket is brand new. (Both are HP carts) Check black ink levels is complete and the color is empty. (still print out red!) Tried to reboot the computer and printer, searching for new updates and drivers, Kaleidoscope, and cleaning heads etc. Nothing works. Strange thing is that the top of the page will display black text, photos in color, something - but then the rest of the page out red. How can I fix?

    The color cartridge is almost out of ink.  When he had the time to sit a bit, it has enough ink for the supply of cyan, magenta and yellow.   That page prints cyan runs out, leaving red (magenta + yellow).  It seems that some program that you use to print text is sent in the form of a graph, causing the printer to use the cartridge color instead of black for the text.  This can also occur if you are using photo paper, the black cartridge is not compatible with photo paper.

  • Why is my Deskjet 6940 printing mirror image?

    Printing on my Deskjet 6940 is very clear and concise, but in mirror image, you should stick to the light and read the other side. What I am doing wrong? Maljal76

    What operating system? In Windows 7 there is a checkbox in the tab 'Complete' for 'Mirror Image', make sure that you uncheck this box.  I would expect similar options in the other drivers.

  • Status of our HP 6940 printer is ready but do not email, wordpad, notepad, or any other source print.

    Using Windows XP
    The printer can print its own summary of the situation so that the printer itself is functional.
    Tried to disconnect and reconnect all the cables to and from the computer
    Any suggestions will be appreciated.

    (1) resources for the resolution of the printer in Windows XP problems:

    http://support.Microsoft.com/kb/308028

    (2) Troubleshooting for when you cannot print in Windows XP:

    http://support.Microsoft.com/default.aspx/kb/314085 MD MOEEN AJAZ KHAN - MCP, N +, A +.

  • DesignJet 130nr: canvas print Designjet 130NR

    Print on canvas of sheet (13 x 19) on Designjet 130NR works very well. Called HP Support asking if there are 24 "canvas rolls that work. Told me and it makes sense, the tool can not handle the Cup fabric.

    Someone at - he found and printed successfully pre-cut large canvases for the 130NR? I've got a good big letter opener, but as anyone who uses the 130 know, it rejects easily paper cut perfectly.

    Thank you

    Marty

    Hello

    Strawberry is not really designed to cut the canvas. Is too thick

    You can still use it, but you will need to replace it more often.

    If your knife used to work, you may need to replace it now

    Here is the part number Q1292-60064 Media knife

  • DeskJet 6940 connected via ethernet to the airport cable, do not print

    Hello

    I used to run my HP Deskjet 6940 printer using a USB connection. I recently installed an Apple Airport Extreme so I can print wireless. If necessary, the printer is connected to the airport by using an ethernet cable and turned on the light green network. On the advice of a HP rep by phone, I uninstalled all old HP software and reinstalled HP software downloaded from the HP website.

    When I try to add the printer to my 'system preferences', it opens a panel that contains the following options:

    Protocol: Automatically selects "line printer daemon - LPD.

    Address: Empty but allows me to type in the IP address assigned

    Print using: no idea.

    More than two things: when I open the HP Device Manager and select "set up a network, information network configuration printer seems in good condition but the Manager does not allow me to 'apply'.  Not sure if this is important but no the printer utilities appear in my folder utlities since the new software download. Thank you.

    Looks like you are using a Mac.

    First of all, the driver for the Deskjet 6940 is built into Mac OS.  You really didn't need to download additional www.hp.com (sorry for the bad advice) stuff.

    Next, we'll check that the printer is on the network.  In Safari, select bookmarks, display all bookmarks.  Select Hello in the left pane, and then check the Deskjet 6940 appears on the list of devices on your network.

    Then, follow these instructions to reset the print Mac subsystem: http://support.apple.com/kb/HT1341

    Now add the printer to the Print & Fax under System Preferences applet by pressing the [+] button.  The Deskjet 6940 should be among the kind Hello from printers.  Select it and press Add.

    I think that should do it.

  • Printer HP deskjet 6940 with Windows 7 problem

    I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?

    Hello

    You will have to install the software of the printer that is compatible with Windows 7.

    Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.

    Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.

    Let me know how you go.

    Good luck and enjoy Windows 7
    Jon

    If this message was useful and allowed, please consider the vote and it offers as a response...

    My Blog - www.insidetheregistry.com

  • Black ink does not print

    I have a 6500 Officejet and Deskjet 6940 connected to the same Mac computer.  I tried to print a document at a time.  After this, wouldn't print black ink.  The computer recognizes the black cartridges both because it gives me the ink levels (two OK). I have:

    (1) reset the 6940 holding down the report Page button and pressing the X button 3 times

    (2) [content removed]

    (3) reinstalled the drivers for printers

    On the 6500, copy black turns to white.  The 6940 printing the report turns white.

    Sometimes, a coincidence is just a coincidence. Because both my printers connected to the computer even stopped printing black at the same time on the same document, I figured it couldn't be a problem with the cartridge or print head.  I did a 1 time on two cleaning machines, but that did not help.

    It turned out that the 6940 had a severely clogged cartridge.  Regarding the 6500, I know that the comments on this forum are sometimes disdainful of help you can get directly at HP, but the tech support staff has spent more than 40 minutes with me (and would have spent more time, but I had to catcha plane) try various options, which has solved the problem.

  • HP Officejet 4500 g510-m, it scans, but it does not print

    Hello

    I have a HP Officejet 4500 g510-m, which seems to work fine. When I connect it to my laptop, which is a Sony VAIO with windows 7 64 bit, using a usb cable it scans normally but it does not print. There is no error push up, even in the print queue's list as his impression, just not as a document waiting or anything. I've uninstalled and reinstalled the drivers, but nothing happened.  I used printing HP and doctor Scan of your site and it print an internal test page, but not one sent from the computer, so he said that this is not a hardware problem, but something is wrong with the software. On other computers, it works fine. Could you help me?

    Thank you

    Lena

    Hi Lena,.

    Please try to use an alternative driver steps and let me know if this helps,

    It should then allow any functionality such as printing, scanning and fax.

    Open Control Panel, and then select devices and printers.

    Right-click on the icon HP Officejet 4500 (be sure not to select the icon of the series Fax 4500), and then select printer properties.

    If there is no such icon 4500, that it can be combined under any other icon, right-click on the computer icon and look then to the properties of the printer, if not do a right-click any listed printer and check if the icon of 4500 sub list the properties of the printer option.

    Click the Advanced tab, and then click new driver. Follow the dialog box until the sweepers list appears, select HP, and then select the HP Deskjet 6940 printer (it is alphabetic sorted by different printers series)... If there is no such clcik pilot the Windows Update icon and allow it some time to update, and then search the list once again appear.

    Follow the steps to complete the wizard and confirm a dialog window, then try to pritning with HP Deskjet 6940 replacement icon.

    You can see any difference?

    Shlomi

  • Print HP DesighJet 510-42 inches with a troublesome green tint

    Hello!

    Please, help us!

    Our 510-42 in. HP DesighJet print with a troublesome green tint.

    Without worrying about the color palette of the used software (draw, Word, PhotoPaint), and primary color (RGB or CMYK) mode, the result is the same - boring shade of green.

    We have three sets of original cartridges that have tried, but the result is the same.

    Printer is used for printing on canvas and photographic paper and color quality is essential for the art reproductions.

    Once more, please, any help is welcome!

    Thank you!

    First of all, thank you for your help.

    I run the troubleshooter and all is well. No problem in diagnostic impression and B.

    The exception is the menu option: Ink - Color Calibration menu > calibrate paper - value depending on the type of paper loaded in the printer.
    When I select "Calibrate paper" instead of display "the value the type of paper loaded in the printer", the printer starts calibration. "
    We used two different operating systems to print, Win7-32 and 64-Win8 and various vector and bitmap graphics programs. Same result - Green is dominant.
    I think that it is a manufacturing defect. Too bad.

    Once again, thank you for your help.

  • 5520: print of posters on HP printers

    I had an HP printer and print driver had the facility to take an A4 document and expand it to print on sheets of 4 or more which, when ready and together, have created a larger poster. Unfortunately, this printer is dead, and the new printer driver doesn't have the same capabilities.

    How can I find out in advance what HP printers have the ability to post mulisheet - it doesn't seem to be a simple way to ask HP support.

    If not, is there another driver I can use my current printer - a 5200 HP all-in-one - or a piece of software that can do the same thing?

    Hello

    All recent HP printers no longer offers print Poster, such models offered, but older.

    You can try to set another pilot and check to see if that can help you:

    1. From the Control Panel, right click on the printer and select printer properties.
    2. Open the Ports tab and notice what port is selected, then close this window.
    3. Click Add printer, then press 'the printer that I want isn't listed.
    4. Select this option to set a Local Port or a network printer with manual adjustment, it should be the last option.
    5. Select the port used by your original printer in the list of existing Ports.
    6. Select HP FRO the component manufacturer, then search for select ad the HP Deskjet 6940 printer.
      Note: If the model is not listed, press Windows Update and allow 5 to 15 minutes until the list of printers appears again, then it will be listed.
    7. Complete the wizard and ty print with the 6940 driver, you will find the option poster in the finishing tab.

    Kind regards

    Shlomi

  • How can I Poster Print with photosmart 7520

    I am a poster and I used poster printing with all of my Hp printers, but my Hp Photosmart 7520. How can I post print with photosmart 7520 use eprint and if not what can I use use the USB cord for poster printing?

    The steps are quite the same, next to another step in the dialog box:

    1. Of devices and printers, click Add printer, and then select a local printer.
    2. Keep the preseleted port LPT amd click on next.
    3. Select HP from the component manufacturer, and then select the HP Deskjet 6940 series in the list of printers.
      Note: If the model is not listed, click the Windows Update button, let several minutes to complete, then it should be listed.
    4. Complete the wizard and confirm the changes.
    5. A newly added the 6940 right-click and select printer properties, open the ports tab and select the port with the printer otiginal model listed in the column of the printer (HP Photosmart 7520 for example), and then click OK.
    6. Poster printing should now be available in the tab of finishing (under Pages per sheet) and posters using the HP Deskjet 6940 printer.

    Please let me know of any questions,

    Shlomi

Maybe you are looking for

  • I have suddenly a window talking when you watch a videao-how to cut?

    How to disable Firefox speaking voice who keep me talking about the 'new window Firefox' and all move and click on that I do.I was not able to find a way to silence the voice.

  • How can I know the model of my Satellite M100 series?

    just my last thought. How can I tell which model I use, it's satellite m100 series, but I still don't know what specific it is... Thanks for the help

  • Touchpad does not work - Aspire V5 - 571G

    My touchpad has stopped working and the device is not even on the properties of the mouse (control panel/mouse, mouse properties/MOMENTUM). It indicates the version of the driver: 11.6.6.002_WHQL ETDWare PS/2 - X 64. But nothing appears on the 'devic

  • I need to format my hard drive

    It won't let me because it says sound using windows but I can not restart from the disc so I can't uninstall anything and when I try it also says invalid drive: / i. it is the design of the worst system ever, If they weren't so money based God dam I

  • Helps to Condition

    I thought that this condition was working until I got an alarm on this subject.  I don't want to receive a fatal alarm on a particular server.  This is the condition I have: Windows_System_System_Table where monitoredHost! = "xxxxx4.fhlb.com". It won