HP 7520 - print error - connection refused 61

Similar Questions

• Photosmart 7520: Printer Wifi connectivity Photosmart 7520

  This printer works well in a small office environment with a Wi - Fi connection.  It has been moved to a home office a piece.  The printer is installed with a wireless connection and works immediately after installation.  An attempt to print after the computer went to sleep or stopped the error message "Cannot communicate with the printer" appears and the impression is not accomplished.  By using the wizard to set up printer on the printer screen, the wireless LAN is located and displayed.  After entering the password, the printer is operational and print all documents in the print queue.  I uninstalled the printer driver, deleted all files associated with HP and reinstalled the latest full driver twice.  No change, the printer works for this session and then connect not when subsequent attempts unless the wireless Installation procedure is complete.

  I have a same printer bought in the same place at the same time and worked in the same office as the above printer OK.  That 7520 does not connect to the wireless network after the appropriate network is displayed and the password is entered.  The print doctor shows a communication problem but has no solution.  All other wireless devices, including computers used in this location connect you and operate without problem.

  It of a problem inherent in the 7520 series or is there another procedure that may correct the problem?

  Hello

  Thank you for using the HP Forums.

  Can you try using a TCP/IP port?

  Creating a TCP IP port

  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  This video resource will show you how do:

  Create & port use TCP IP

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Let us know if it works

• Users to push AD on Horizon - sync error - connection refused

  Hi all

  I'm Configuration Manager Application Horizon atm. I sent them both. OVF files, network settings, enabled with token etc all right.

  
  In the Setup Wizard that I have in my field, I can see my users when I filter and can select my group.

  The last step of the installation wizard is "pushing ahead".
  Unfortunately, it won't grow. I get the following errors:

  Push on the Horizon: synchronization of actions cannot be calculated at this time. Please try again later.

  And the menu alerts, I get this: "otherError: unable to complete sync due to a problem with the service: request failed: connection refused"

  On this picture you can see the Bell on the horizon, but I get the error ' can' sync actions... "
  instead of this form: http://letusgovirtual.com/wp-content/uploads/2012/06/push-to-Horizon.png

  I already opened the port 443 & 636 firewall, does not work. The name of my group is not with a space between.

  What Miss me? If someone can point me in the right direction, I would be very grateful.

  Please enter you.

  The service - will and the connector must trust each other certificates.  Best is to use a signed public certificate. In the menu of the console of the connector, you can download the cert of the AV service. This should make the trust service connector - goes.

  Set up certificates. is a little bit of work to be honest. You must build a certificate chain and save it as a file of keys to TC and then manually copy the keystore in the service - will.

  What do you mean hostname for the service - go? You should be able to use what you want. Personally, I often use horizon.domain.com or workspace.domain.com.

• HP All in one 7520: printer error code... 0 x 61000016 on all HP in a 7520

  I have an error code of 0 x 61000016 on my HP all-in-one 7520. I unplugged/plugged the all-in-one, on and off. I have not found a solution to help. What can I do next?

  Have you looked at this link from HP?

  Your warranty is still valid?

• ePrint mobile printing error connection

  Just bought HP Officjet 6700. Tried to set up ePrint, but get an error when you try to create an account: Ajax send error = 403.  Can someone help me with this?

  Been answered here several times.

  http://www.google.com/search?q=+Ajax+submit+error%3D403&sourceid=ie7&rls=com.microsoft: en - us: ContextMenu IE & oe and ie ==.

• Photosmart 7520 - printer Terminal error

  I note the following HP problem:

  I have installed a 7520 recenty Photosmart all-in-one printer on my home network. I connect to it via WiFi. It set up fine and generally works well. However, every week or so the screen of the printer is a message;

  Printer error

  There is a problem with the printer.

  Turn the printer off, then on.

  The four buttons off the screen (home, return, aid, cancel) and Wi - Fi blue LED flash all together.

  When I cycle the power, following the instructions, everything is fine until the next time it happens. I've seen the problem 5 - 6 times now.

  The printer had the latest firmware when I've set up a few weeks ago. If I try an update it signals that it is up-to-date.

  Concerning

  Steve

  Hello world

  With the help of Steve310 & Helen we tested this scenario more than two weeks without any problem. Enjoy the time you have spent with me Steve310 & Helen to investigate this matter. Have a wonderful day.

  Disable this feature in the EWS printers and let me know if you continue to have the problem?

  Disable UPnP in EWS printers:

  Follow the steps below to access the Web integrated printer server.

  1 type the printers assigned to IP address in the Internet Explorer address bar.

  2. Network tab

  3 network option on the left

  4. UPnP option on the left

  5 Select the option 'Disable UPnP'

  6. click on 'apply '.

• I can't connect to certain things (connection refused error)

  Hello

  recently I am experiencing an error where my mac does not connect to certain things, to make an example and explain

  -I can't open the web page of google

  -I can't open another page Web (connection refused error)

  -I can't open steam but downloads don't work and so used to the store

  I had this problem once before, but a call for assistance from apple and everything worked again.

  I would like to know what causes this problem and how to solve this problem, so I can't call assistance all the time

  Thank you

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  The first three are clearly not VSearch files because the names match either of the above models. The last two are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these legitimate files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Printer error 7520, no code error

  I have a 7520 Photosmart, installed new 10 days ago.

  Apparently it does not work well, I mean it prints, copies, scans, sends and receives faxes (despite the fact that the fax test said that my line has a weak signal, which I doubt since I live 300 metres from the telephone)...

  But sometimes the screen printer icons (five expires in 10 days) begin to blink and a text appears on the screen that says:

  "The printer error.

  "There is a problem with the printer.

  «Turn the printer off, then on.»

  There is no error code, or an explanation of what causes this error. Simply by touching the switch of the printer, it isn't goin, but by itself restars and everything goes normal again... until he gets the following error again.

  In any case, I continue to put off the printer, unplug the unit, wait a minute, electric plug, reconnect the printer to the power cable and turn on the printer. But the problem persists.

  I would like to know what causes this error and how to prevent it from happening again, since it leaves the printer offline, and is not the expected behavior.

  Hello world

  The best solution for this problem is to disable the UPnP option in your router instead of on the EWS Printers page. With the help of Steve310 & Helen we tested this scenario more than two weeks without any problem. Appreciate the time you spent with me Steve310 & Helen to investigate this matter. Have a wonderful day.

• iMac cannot connect to 7520 printer (wired) - after six months of work very well.

  My Photosmart 7520 worked fine for six months - cables for iMac, wireless for Mac Book and iPad.

  Suddenly, the iMac to which it is connected, unable to connect to it.  Then, of course, the other devices in the House cannot connect wirelessly is.

  1. total stop did not help.  Printers, sometimes he showed a light yellow, sometimes shown green and slowed down... but sending print jobs made back to "unable to connect".

  2 remove the printer from the list, and since the iMac can't find it, I now have nothing.

  3. I can't do a reset of the printer because I lost the driver for my old Perfection 2400 scanner.

  I have never been able to activate the web services.  That this has something to do with it?

  Help. Sandy

  Hi Sandy,

  Sorry to hear that there are some problems with your connection to the printer Photosmart HP 7520.  If you don't mind not could you please answer a few questions that might help me understand what could happen.

  The 7520 Photosmart printer has an Ethernet (wired network) port, in "wired", I'll assume you mean that the printer is connected to your iMac via USB cable.  You the first thing I would try is to unplug the USB cable to the back of the printer and taking again and then do the same thing at the back of the iMac.  I know that sometimes because of the angle of the cables, they can be loosened.  See if the iMac can then "see" the printer.

  You can remove the printer from the printers and Scanners, system preferences, selecting the printer in the list on the left, then pressing the key less at the bottom of the list.  This should in no way affect or not wearing your Epson Perfection 2400 is always configured in your PC.

  Can you please tell me if your iMac is on the (access point) network as your MacBook and iPAD?

  When you use your iPAD to print, it can "see" the printer (you can select or it appears by name)?

  Finally, if you tap the wireless on the front panel of the printer, it should display the IP address of the printer.  Your MacBook when it is connected to your wireless network, open Safari and type http:// and the address of the printer showed you.  Safari open the page Web of the printer or a mistake?

  Thank you

  VancDarkstar

  I am an employee of Hewlett-Packard

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• "Error please make sure printer is connected to the computer" when installing HP Photosmart 5515.

  Original title: my HP Photosmart 5515 will be OK: print/copy/scan to memory card. BUT...

  Running Windows 7, new printer installation, I tried HP site and Instruction Book, uninstalled and Reinstalled.

  Same problem each print/copy/scan time.will memory card OK. BUT does not connect to my laptop to scan to the computer wireless or wired, it rises "year error occurred while scanning, please make sure that printer is connected to the computer.

  Hello

  Method 1:

  I suggest you run the automated FIXIT from the link below and.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I also suggest you to go through the steps mentioned in the link mentioned below and check.

  Scanning problems? Try the HP scan Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114802&cc=us&DLC=en&LC=en&product=5063608&tmp_track_link=ot_search#N97

  HP Photo smart 5510 and 6510 e - all-in - One Printer Series - a 'connection error' or "Computer no. detected" Error Message appears when trying to Scan from the printer control panel

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02917811&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=5159859&prodTypeId=18972

  See also:

  How can I get my PC to see my Photosmart printer of 5515 via my wireless network

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-do-I-get-my-PC-to-see-my-Photosmart-5515-printer-via-my/TD-p/1171265

• Windows 7 cannot connect to a shared printer (error 0x0000000d code)

  I try to add a laptop to my home network and can not get the printer to connect.  Everything is wireless.

  The main PC uses Windows 7 Home Premium.  32-bit operating system.

  The new laptop uses Windows 7 Professional.  64-bit operating system.

  The all-in-one is Kodak ESP9 + 0250.

  The laptop recognises the printer on the network, but I get the error message: Windows 7 cannot connect to a shared printer (error 0x0000000d code)

  Any ideas on how to make the printer connect?

  The usual reason is no driver on the laptop. You should install the drivers and the software of the printer on each computer on the network. Once this is done, it will connect well. The network itself, will show the printer as a gift, just the laptop won't connect ' cuz he doesn't know how.

  Many answers here: http://social.technet.microsoft.com/Forums/windows/en-US/d02718d8-cf5d-45de-9206-46714a549ee0/windows-cannot-connect-to-the-printererror-0x0000000d?forum=itprovistaprinting

  .

• Search goocle net 102 error cannot reach. ERR-connection-refused

  just installed google crome but I can not go on the line he know THE WEB PAGE only IS NOT AVAILABLE ERROR 102 (NET... ERR-CONNECTION-REFUSED) THE SERVER HAS REFUSED THE CONNECTION

  The Google Chrome Help Center has the following about the 102 error: http://www.google.com/support/chrome/bin/answer.py?answer=117805

  There are other elements of support of Chrome on the 102 error at: http://www.google.com/support/chrome/bin/search.py?ctx=en%3Asearchbox&query=error+102

• I'm unable to connect database of cloud of the trial, it gives connection refused error

  I am trying to connect to cloud trail oracle database using sql developer, I get the error message "connection refused".

  Service URL

  https://databasetrial5793-inexcelityglotrial51349.DB.US2.oraclecloudapps.com/Apex

  Username: Tes_user

  SFTP host: port sftp.us2.cloud.oracle.com 22

  username: us220585

  What version of sql developer are you helping and you use the "Cloud connect" correct?