Photosmart 7520 - printer Terminal error

I note the following HP problem:

I have installed a 7520 recenty Photosmart all-in-one printer on my home network. I connect to it via WiFi. It set up fine and generally works well. However, every week or so the screen of the printer is a message;

Printer error

There is a problem with the printer.

Turn the printer off, then on.

The four buttons off the screen (home, return, aid, cancel) and Wi - Fi blue LED flash all together.

When I cycle the power, following the instructions, everything is fine until the next time it happens. I've seen the problem 5 - 6 times now.

The printer had the latest firmware when I've set up a few weeks ago. If I try an update it signals that it is up-to-date.



Hello world

With the help of Steve310 & Helen we tested this scenario more than two weeks without any problem. Enjoy the time you have spent with me Steve310 & Helen to investigate this matter. Have a wonderful day.

Disable this feature in the EWS printers and let me know if you continue to have the problem?

Disable UPnP in EWS printers:

Follow the steps below to access the Web integrated printer server.

1 type the printers assigned to IP address in the Internet Explorer address bar.

2. Network tab

3 network option on the left

4. UPnP option on the left

5 Select the option 'Disable UPnP'

6. click on 'apply '.

Tags: HP Printers

Similar Questions

  • HP Photosmart 7520 printer while a (flashing)

    I have a HP Photosmart 7520 printer all-in-one. It lights itself with flashing lights and an error to turn the printer power off and start again. I followed instruction and turn the printer off. Reverse in the printer of the room is lit, flashing with error to turn off the printer. So I unplug the printer. Help

    I had already unplugged printer and reboot so that solved my problem for now.

  • HP photosmart 7520: printer does not print when lite blue flashes

    I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.


    Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

    I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

    Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

    Other that those try after the following steps to solve this kind of problem:

    Plwase informed me of a difference


  • Photosmart 7520: Printer Wizard does not work on Windows 10

    My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

    Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

    Now all I get is a printer configuration screen that has 3 options

    -connect a new printer,

    -convert a USB printer wireless, and

    -Add new software.

    How can I get the correct printer assistant screen to run?

    Thank you.

    Hi @AJA3,

    Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

    I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

    It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

    I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

    If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

    Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Photosmart 7520 printing in black and white?

    I have a photosmart 7520. I want to print a black and white text form, but since there is no ink in the photo to the left cartridge, I can't print anything. Is it not possible to print only black and white stuff, whith this printer?

    Thank you


    Hi Thomas (Jeeeez).

    This is great news, you are the very welcome

    I was wondering if you would be able to score my post as an acceptable Solution? In this way if others have a similar problem, the job is easier to find.

    Anyway, thank you for your time and patience, have a beautiful your weekend!

  • HP Photosmart 7520 printer all in one

    Earlier this year, I bought a HP Photosmart 7520 all in one printer and now I am about to buy a new office with an operating system of windows 8.  The 7520 printer is compatible with windows 8?

    Pap5, welcome to the forum.

    Here is the page of software and the driver for the printer showing the complete software for win 8:

    Therefore, it should work perfectly.

    If your problem is solved, please click "accept as a Solution.

  • Photosmart HP 7520: photosmart 7520 printer all-in-one fell my SSID wireless

    My photosmart 7520 worked well until a few days ago.  It has stopped printing.  Wireless test report I am not connected.  I tried the wizard wireless set up to get reconnected but my wireless router number has disappeared from the list.  I typed it in manually but it won't.   Anyone know how I can print again?

    Hi @msibrox,

    Welcome to the HP Forums!

    I noticed that your HP Photosmart 7520 will not connect wireless to your Windows 7 computer. I'm happy to discuss this issue for you!

    I would say to begin with a hard reset, by going to this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

    I would also like to cycle power to the router. (With the router, unplug the power cable, wait 30 seconds and plug it back.) Wait for the lights to come back and try to connect to the printer again. Installation of the wireless printer.

    If it still does not work, print a Network Setup page. Print a Network Configuration Page, let me know if something falls down, and the number of disconnects.

    I hope hear from you soon!

    "Please click the Thumbs up icon below to thank me for having responded."

  • Photosmart 7520 printer Assistant shortfall 8.1

    I use the Photosmart 7520 and it really miss me the companion printer that I found very useful, but now does not work or I'm not. I had recently installed Win 8.1 and to my great regret, this beautiful dashboard is unavailable. If anyone can help?

    Well, this proved to be a morning adventure, for the most part not related to HP software.

    I completely sanitized HP apps on my computer by using RevoPro.  Then, I ran a SFC.exe and found a corrupted file (AMD64\CNBJ2530.dpb).  What I've learned has been a problem in the HP community and others. I fixed that with repair DISM tool found on the forum of users of Microsoft.

    I restarted after the patch, then reinstalled the big package of drivers for the Photosmart 7520. Everything works fine now, including obtaining the Printer Wizard.  I seem to remember, but it is a feature that allows you to customize this app to display the availability of the network, status and the printer ink levels in a dashboard.  I'll track down later.

    Thank you for your support of Dragon-fur!

  • Photosmart 7520: Prints but won't scan Photosmart 7520 Win7 and Win10

    Very well printing - scanning fails in both directions, of PC to the printer and the printer to the PC.

    No form of works-y PC using the HP device Page or print and Scan doctor.  All two see the printer but when they try to connect give the message error «scanner communication can not be establshed...» »

    If you go to the printer itself and try a "Scan to PC" the printer sees name of the PC, but when you click Scan an error message comes up saying "no computer connected.

    Having exhausted all the recommended solutions: uninstall and reinstall the drivers. Run Selective startup without any service has been activated; Print and Scan Doctor (tells me that there is a problem of TWAIN, but even then gives error "can' communications Scanner...", even after the PC reboot and repeat the doctor P & s); restart the router method.

    The only method of scanning that work which means the network is scanning to E-mail.

    Any ideas?

    Hey @grunte1,

    Welcome to the HP Support forums!

    I see that you encounter some problems with the scanning of your 7520 Photosmart e-all-in-one printer to your PC for Windows 10 and that the printing and scanning doctor detects a problem with your TWAIN drivers. As TWAIN drivers refer to a component of the operating system, the only things I can suggest are updates or perform a system restore. In addition, I suggest contacting the one who sold you the PC or the Microsoft.

    If you have any other questions please let me know. If not, have a great day!

    If you appreciate my help, please let know by clicking on the icon below my post thumbs up.

  • Photosmart 7520: Printer Wifi connectivity Photosmart 7520

    This printer works well in a small office environment with a Wi - Fi connection.  It has been moved to a home office a piece.  The printer is installed with a wireless connection and works immediately after installation.  An attempt to print after the computer went to sleep or stopped the error message "Cannot communicate with the printer" appears and the impression is not accomplished.  By using the wizard to set up printer on the printer screen, the wireless LAN is located and displayed.  After entering the password, the printer is operational and print all documents in the print queue.  I uninstalled the printer driver, deleted all files associated with HP and reinstalled the latest full driver twice.  No change, the printer works for this session and then connect not when subsequent attempts unless the wireless Installation procedure is complete.

    I have a same printer bought in the same place at the same time and worked in the same office as the above printer OK.  That 7520 does not connect to the wireless network after the appropriate network is displayed and the password is entered.  The print doctor shows a communication problem but has no solution.  All other wireless devices, including computers used in this location connect you and operate without problem.

    It of a problem inherent in the 7520 series or is there another procedure that may correct the problem?


    Thank you for using the HP Forums.

    Can you try using a TCP/IP port?

    Creating a TCP IP port

    1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
    2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
    3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
    4. Enter the IP address of the printer.

    This video resource will show you how do:

    Create & port use TCP IP

    Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

    Let us know if it works

  • HP Photosmart C309a printer has error 0x61011be5

    My printer has a gear grinding noise and the 0x61011be5 error message. You will find a short solution to buy a new printer? Thanx

    As OEM HP is responsible for the good operation of the printer and their drivers. Check with
    HP support, their documentation online and drivers and ask in their forums.

    HP - Photosmart Premium Fax all-in-One Printer - C309a<- product="" support="" and="">

    HP - Software & Driver Downloads - HP Photosmart Premium Fax all-in-One Printer - C309a<->
    your version of Windows.

    Support HP & drivers

    Contact HP

    HP forums

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • HP Photosmarts 7520: printed paper back in the printer before finishing

    Lately the print when I print a document arrives at halfway of the printer, and then it goes back into the printer. The window says 'let dry ink '. The printer has an error message but when I click on the red X on the window, completed copy will come back. No idea why? Just started doing so a week ago.

    The printer will back the paper to print on the back if "Duplexing automatic" is selected.  Check the settings of the driver.  What is the error message?  The troubleshooting steps described here can help solve if there is a paper jam message.

  • HP Photosmart 7520 prints not the initernet more

    I installed a new keyboard and wireless Logitech mouse.  Since then, it seems that my HP 7520 does not print copy (letters and numbers) I copy / paste of the internet.  I am running Vistas on my desk.  This seems to happen if I go in through AOL or explore.


    Thank you.

    Hi again,

    I'm back in business...

    It turns out that the black ink cartridge, I replaced a few days ago has not been properly installed.  Once I understood that and reinserted it, things started working again.

    Thanks again for the help.

  • Photosmart 7520: msg of error on the cartridges

    Hi... need help with an error message on the ink cartridges.  I read through the forum and other people are having the same problem.  I get the message "one or more cartridges appear to be missing or damaged."  Until then it was printing normally.  I have not received all the "low ink" messages, but he did print a blank page.  I took the cartridges and reinserted.  Doesn't seem to be any damage. I turned off the printer and also disconnected for several minutes to possibly clear error messages. The message will not go away, and I can't use all the functions with the printer.  I would like something to fax and I can't even do that because the error message screen will not go away.

    It was suggested that previous to "wiggle" the cartridges... did not for me.  I really enjoy this printer and its speed.  I bought it last Christmas, so it's fairly new.  Any other suggestions for me?

    Thank you



    Thanks for the tip and the link... it was part of the solution. I tried some of the help in the link, but nothing worked. I spoke with a representative from Hp support today and he helped me clean the print head... This has not helped. I was using a Hp refill cartridge for a Cartridge World store and he thought that this might be the problem. He suggested that I get a new black cartridge Hp. I took the printer all in this store to see if they could help... and she did. She took out the cartridges and check the contacts. She found one of the four copper pins in the large black ink slot still depressed... the other three had sprung back where they should have been. She tinkered with her and she appeared normal as the other three. She reintroduced all the cartridges... back turned on the power and the error message disappeared and the problem was solved.  I think that this trick should be included in the support tech manual when customers call in.

    I hope that it is a one-time problem. It is still under warranty and I plan to replace. Thanks for your prompt response and for helping me learn more about my printer.


  • Photosmart HP 7520: Photosmart 7520 Print smears

    I can't with smudges of ink/streaks when printing envelopes from 6 3/4.  This would set a replacement print head?

    Welcome @Redeagle999,

    Thanks to their participation in Forums of HP! By your post, I see you found the smears and scratches when printing on envelopes. I will definitely do my best to help you.

    You also encounter that problem print on regular paper?

    It may just be a document outlining driver that needs to be changed.

    I'd start first with the cartridges. Try these steps and let me know the results: fixing poor print quality.

    What are the levels of ink and you use genuine HP inks?

    Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

Maybe you are looking for

  • Can not get audio driver working under WXP SP3 on the Satellite A200 - 1 P 8

    Hi all I have WXP Pro with SP3 and I do not get the sound drivers work.If I try the packages, I get the error:The version of windows you have installed does not match the update you are trying to install SO HOW TO GET AUDIO DRIVERS WORK? :(:)? Thx a

  • SMU-5451. digital filter Interpolation

    Hello I use the SMU-5451 with FPGA SMU-7966R signal generator. They are related to peer-to-peer technology. I want to use the digital filter of Interoplation, but there is a place to errors in the property node. Here is a screen of this error. What s

  • How to open a RAR file in Vista?

    Hi, I have windows vista, cannot open rar file, could you please help me?

  • 2 copies of the operation after mid-Autumn Festival

    My computer froze and the only way that I was able to come back was to reinstall the vista disc, now I have an old windows on top I have new op resettled when it was freezing... How can I go the former? Tried to go through and uninstall old. Could no

  • Getting an error Code:-5005: 0 x 80070002 while eliminating the IVMs-4200

    * Original title: IVMs-4200 W8 remove problem Try to remove the IVMs-4200 software and all time shows this erro. Error code:-5005: 0 x 80070002Error information:> Kernel\KernelMedia.cpp (95)> SetupNew\setup.cpp (817)PAPP:iVMS - 4200 (v2.00)PVENDOR:Hi