HP 7520 unable to connect to Web Services, "error server connection."

Similar Questions

• HP Photosmart 7520 unable to connect to Web Services

  It's used to work. Now when I try to scan to e-mail, I get all the way to where I choose it as a Document and then I get the message "unable to connect to web services. I printed out the results of the wireless network Test and everything looks great. Also, the Configuration of the network page is superb. My name network, says it is connected to the Internet. I was able to download the updates. IP address looks right.

  I have downloaded and run printing HP and doctor Scan and it crashed.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: HPDiagnosticCoreUI.exe
  Application version: 3.1.0.25
  Application timestamp: 50fd3a60
  Fault Module name: dlbxtwds.ds
  Fault Module Version: 3.107.0.0
  Timestamp of Module error: 45df4cd1
  Exception code: c0000005
  Exception offset: 00004da2
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  @shoikh

  I understand that your printer is not connected to the web services.  . I would first disconnect the router and the printer for about 1 minute.  I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

• HP photosmart 7520: HP photosmart 7520 unable to connect to web services

  I am also having this problem. I tried the solutions above. Can you also send the solution for me?

  drzman1

  Welcome to the Community Forum of HP.

  I don't know that to which you are referring - he could be the following:

  By PrintDoc Web services

  PhotoSmart 7520 does not connect to "Web Services"

  You can take a look at the suggestions already provided - they are likely valid for your situation.

  I can also offer you the following:

  Reset Web Services in ePrint printer

  • A method essentially provides the procedure that you find in PrintDocof wire,
  • Two method explains one more 'standard' reset Web Services approach.

  ============================================

  If you are in the USA or the Canada, you can call using Cloud Services.  I suspect that they can help during normal hours, but you can certainly call anytime and see if help is available:

  When to call HP Cloud Services and when to call HP Tech Support

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP 7520: Unable to connect to web services

  Get the unable to connect to web services, went through some previous discussions and no help. Uggghg

  Hi @Davem72,

  Thanks for your comments.

  We said that server problems have been resolved, can try you again to see if you are able to scan to e-mail?

  Have you been able to 'test' successfully once you have installed the scanning to E-mail?

  Thank you.

• Photosmart 7520 unable to connect to Web Services

  Hello

  I can't scan it and send it to any email address, printer tells me it is unbale to connect to web services.

  I checked the 8888 and the 8884 and entered manually, also the work of Apps

  Help please

  I was just talking with a colleague who said that power pulling plug without touching the power button is more efficient for this problem and it has a 7520.  If it does not the next thing to try is to disable and then re-enable the web services.  The problem with this approach is that it will give you a new address of email eprint.  If your original eprint email address is important to you then you probably don't want to do.

• Photosmart HP 7520: HP Photosmart 7520 unable to connect to Web Services

  I was able to scan for months, now impossible.  It seems that there is a difficulty, but it is not displayed publicly.  Can you please send it to me?

  Hello @Jibberdee ,

  Welcome to the forums of HP.

  I understand that you are having a problem with the e-mail scanning on your Photosmart 7520 function.

  I would like to help.

  The first thing to try is a manual DNS.

  The following link will take you to a terminal of happytohelp01, which has detailed photos and instructions to set the manual DNS. The instructions are for a Photosmart 7510, but the steps will be the same.

  EFax 7510 still does not work after the power off/on several times ePrint

  If that does not get the scan to e-mail work try removing and then enabling web services.

  WARNING: If you printer has a custom ePrint address, this will cause the printer to lose the address.

  Not for 6 months or a year, forever.  It will also wipe the scanning to e-mail settings. Save all email addresses and PIN numbers will be lost.

  To remove web services tap the ePrint on your screen printers.

  

  Then, go in the settings submenu and choose Delete the Web Services.

  This will bring you to the main menu of printers.

  Press again the ePrint.

  You will be asked to activate the web services.

  This is a page.

  This can be used to add to your HP printer connected account.

  The next step is to configure the scan to e-mail again.

  During this process, we will give you a new pin code.

  Test scanning to e-mail.

  I hope this helps. If you need other assistance please let me know.

• HP 7520 cannot connect: scanner HP 7520 unable to connect to Web Services - by e-mail is no longer work

  Cannot connect my printer to web services. It only allows me to send to analyze more.

  I tried a number of things here. I'm about to throw the HP printer out the window at this point and NEVER buy another product from them again. Can anyone help?

  Hey @kevinbh,

  Welcome to the Forum from HP Support.

  I see you are having a problem connecting to the Web services with your Photosmart HP 7520 e-all-in-one printer. I want to help you with this. I have some suggestions that might help.

  I addressed this issue in another thread. Click here and proceed as described under the heading "common remedies. Please let me know the result of your troubleshooting by responding to this post.

  If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• Re: HP Photosmart 7520 unable to connect to Web Services

  I have the same problem as all the others. Can you send instructions to solve?

  If you are not able to connect to the Web service, try the steps below and check if your issue is resolved:
  1. tap the ePrint button located on the top left corner of the screen.
  2. go to settings and then seek to remove Web Services, press Yes. He should return to the home screen.
  3. Press button ePrint again and then agree to the terms, press Yes if you are prompted to enable automatic updates, and then once done at the time of process scan image.

• Web Services problem - server connection error

  Hello world.

  When I try to enable Web Services, I get an error. I am connected to internet (WiFi) and the connection is ok.

  The error is:

  Server connection error

  The printer could not connect to the server. Check the internet connection and try again, or enter a proxy address.

  I do not have a proxy, and the internet connection is ok! Why do I have this problem?

  Thank you very much.

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.< the="" dns="" could="" be="" your="" problem.=""  if="" this="" does="" not="" work,="" try="" google's="" dns="">
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Web Service error on downtime

  We develop Web services applications.
  Someone after items, please tell us.
  
  (1) if, Web services, Oracle CRM On Demand to connect downtime if the error?
  
  (2) if, Web services and data to add to the capacity is exceeded, an error?
  
  (1) and (2), we are some mistakes and I want to know if there is an error message.
  We take care of these errors.
  
  Thank you.

  1. If web services are stopped or OnDemand is off service->, you cannot connect and you will not get the jsession id. Most likely reason will be Server not available.

  2 capacity is exceeded-> certainly you will get the error message, I don't know exactly what message you will get.

• Web service error - related OS?

  Hello

  I developed an application in Eclipse using JDE 4.3.0 plugin. The application that I have works fine until I have try to hit a webservice. To try to hit all the application crashes or comes back with the error "error communicating with webserive or SOAP body or soap envelope is missing".

  I get a message asking for confirmation of the call to the correct server.

  The application uses consistent with the JSR 172 J2ME Web Services specification generated stubs for hitting the webservice. The Web Service is written using VS.NET 2005 and worked very well for the Simulator.

  The strange thing is, the app works fine on a Blackberry Bold with OS 4.6.0.126. The handset that I use to test which is a failure is an 8700 c with 4.5.0.99.

  I tried the application deployment by pushing it using the BES server and also using the Desktop Manager.

  There is no security setting obvious that differ in different handsets, could it have something to do with the number of BONES?

  Any suggestion would be appreciated. Thank you very much.

  Solved, changed required proxy server settings because the error was caused by a time out.

• CI based Web Service error handling

  Hello
  
  I use a CI based web service to update my ps tables. Now, I have a requirement to capture the request and response messages in a table / how to get the request message?

  PeopleSoft already collects it for you.

  You can retrieve the request and response xml by using the method GetSyncLogData in the class IntBroker
  PeopleSoft also uses that you submit the request and response xml in services monitor.

  Line of code in the pageactivate of AMM_RAWXML4
  + & str = %IntBroker.GetSyncLogData (AMM_SYNCLIST. GUID, decodelogtype (AMM_DERIVED. LOGTYPE), False); +

  You can retrieve the TransactionID (first parameter) by running a select statement on PSIBLOGHDR where IB_OPERATIONNAME = 'YOUR_CI_SERVICE_OPERATION_NAME. '

  PeopleBooks on this method:
  http://docs.Oracle.com/CD/E28394_01/pt852pbh1/Eng/psbooks/TPCR/book.htm?file=TPCR/htm/tpcr27.htm#57248C9C_1355AB6F02A_6CF7

  Syntax
  GetSyncLogData (TransactionId, LogType % [, Archive])

  Description
  Use the GetSyncLogData method to return a log containing information about the specified synchronous message.
  You can use this information for debugging. Using this method, you can get the data request and response to a synchronous request, before and after the transformation.
  This function is used in PeopleCode for the Message monitor.

  Parameters
  TransactionId
  Specify the ID of the published message transaction.
  LogType
  Specify the type of log that must be returned, depending on the type of message. See below for valid values.
  Archives
  Specify whether to retrieve logs archived as well. This parameter takes a Boolean: true to return archived newspapers, false otherwise. The default value is false.

  For the LogType parameter, valid values are:
  Constant value
  Description
  % Sync_RequestOrig
  Gets the log for a data sync original request message.
  % Sync_RequestTrans
  Gets the log for a message of transformed data synchronization request.
  % Sync_ResponseOrig
  Gets the log for a data sync original response message.
  % Sync_ResponseTrans
  Gets the log for a message of transformed data from reply sync.

  Returns
  An XML string containing the log data.

• The right Web Service error

  I have set up the web service of this tutorial: http://www.Adobe.com/devnet/digitalpublishingsuite/articles/your-direct-entitlement-servic.html

  I've got the db configuration and work, but when I try to create an application he says: "the GUID for AdobeID 'xxxxx' could not be found.  I have replace my AdobeID in the message by xxxxx.

  Anyone using this tutorial and get this error message?  Any idea what's going on?  The tutorial and code not provice any troubleshooting info.

  Make sure you have the latest zip associated with the article.  We recently changed to require SSL and a new field for examples.  You should have these 4 lines starting at line 66 of the admin/index.php

  			curl_setopt ($ch, CURLOPT_FOLLOWLOCATION, true);
  			curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
  			curl_setopt ($ch, CURLOPT_SSL_VERIFYPEER, false);
  			curl_setopt ($ch, CURLOPT_SSL_VERIFYHOST, false);

  If you're still having problems, check the logs and contact me directly.

• Admin Web service error

  Recently, we copied a box CF 7.02 with the file of the car to a new server. After that, all traffic on the new server that is trying to call a Web service (finally / salesforce) bombs, saying that it cannot generate stub objects. In addition, when you try to enter in admin, it is said that the Web service is not valid. (Even though 2 other boxes currently have the same parameters and work.) Any ideas would be very appreciated. I enclose a copy of the error I get.
  
  -----------------------------------------------------

  Had, there was a problem in the firewall on the new server.

• Unable to open Windows media player error Server execution failed

  Original title: my windows media player does not open

  I have windows 7 and recently everytime I open my Media Player, that it opens at all and if I select a file to play with media player, it says "Server execution failed" and it never occurred before. Help, please! I'm dying without my music

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         What happens when try to open Windows media player?

  I suggest you follow the steps mentioned below:

  Method 1:

  Open Windows media player troubleshooting setting and check if the problem continues, follow them steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  If the previous step fails execution of corner store to library Windows media player and check if the problem persists, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 3:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted system files follow the steps in the following article below to run the System File Checker:

  http://support.Microsoft.com/kb/929833

  You can alsoUN fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 4:

  If the previous step fails to follow these step and check if the problem persists:

  a. Click Start and in the search bar type cmd.exe

  b. right-click on cmd.exe and click Run as administrator

  (c) in the command prompt, type the following command:

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  d. press on enter, and then restart the computer and check if the problem persists.