The message that I have the latest version already installed when you try to install Windows Essentials.

Similar Questions

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• Get the F3-F200-002 error when you try to start Windows 7 64-bit edition

  I have a Toshiba Satellite computer laptop C855-S5214...   I had to restart the computer after an AVG update. It closed and restarted and got stuck on the windows icon (icon was always moving / floating, but it wouldn't keep loading)...  He did this thing even a week or two ago... We took out the battery and put it again and it booted up fine... this time... nothing...   (don't ask me why we pulled out the battery... we (that is her husband) did and told me eventually--)

  At first he would stop at the windows icon and just stay there forever...  Then, I did F8 and started in safe mode... which worked well...  I tried to do the repair, and it comes to say it could not be repaired and to close... then I tried the last known good configuration startup and that did nothing at all... literally... after a few readings on the internet, I decided to use my 5 recovery disks from Toshiba that I made when I came to the computer and try to reformat save my files... I went into Setup and said to boot from the CD/DVD-ROM, because I could not do that without forcing this way... he got through 3 disks and then the disk 4, I got the F3-F200-002 error and now I can't do ANYTHING without getting this error can not enter setup F2...  I get the error until it's here, so I can't recover even to change it to boot from a hard disk instead of the CD/DVD drive...  I can get to the F8 screen but what I chose, I get the error...  I even tried to put in disk 1, as it is supposed to be the 'solution' to this error, but that does not work either...

  Leslie

  Hello

  It is an error code very vague on what is best to fix it.

  And the closet I can find is 0002, no 002

  Solutions to be a module of bad memory, bad sectors on the hard drive, defective recovery disks or a faulty hard disk can designate.

  I suggest you read the information contained in these links:

  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65437

  http://forums.techarena.in/operating-systems/1413251.htm

  http://forums.techarena.in/operating-systems/1381256.htm

  To reinstall from the Toshiba recovery partition, makes you the disks, you press the 0 (zero) to start, then follow the instructions for installation back to factory settings.

  See you soon.

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  The following article is maybe worth a visit:

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Failure to solve the problem... and if you
  are comfortable editing the registry... it
  may be worth a try to remove the following text
  Registry keys:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmp.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmploc.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\\wmplayer.exe

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• LDIF syntax error: what is the reason of this failure when you try to import the new user

  What is the reason of this failure when you try to import the new user, followed the book syntax

  C:\Users\Administrator\Documents>ldifde-i f Newusers.ldf
  Connecting to "practice01.testa01.com".
  Registration as current user using SSPI
  Import directory of the file "Newusers.ldf".
  Loading entries.
  There is a syntax error in the input file
  Failure on line 3.  The last token starts with 'C '.
  0 entries modified with success.
  An error has occurred in the program

  Hello

  The question you have posted is related to LDIFDE with Active Directory in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://TechNet.Microsoft.com/en-us/default.aspx

• When you try to open Windows Messenger, I got the following. C:\ProgramFiles\Windows Live\Mesenger\msnmsg.exe side-by-side config incorect

  When you try to open Windows Messenger, I got the following.  C:\ProgramFiles\Windows Live\Mesenger\msnmsg.exe side-by-side config incorect

  Hello

  The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Messenger community. Please visit the link below to find a community that will offer support to ask.

  http://windowslivehelp.com/product.aspx?ProductID=2

• 'ERROR 8024200d' this is the error code I get when I try to run Windows update

  code 8024200 D is the error code I get when I try to run Windows update. My Windows Vista computer is SP2 after you install updates.

  I tried installing several times with no luck and end up with the same error code. I have "Microsoft Security Essenial" installed on the PC.

  Thank you

  Hello
  You can follow below link that can help you to solve your problem:
  Windows Update error 8024200d
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
   
  Note: Above the article implies on error 8024200 d.
   

• get the fatal error when you try to start Windows 7 Easy Transfer...

  get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

  Hello Jo,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• My downloads keep getting interrupted even of the Microsoft site when you try to download Windows 7 upgrade advisor.

  My downloads keep getting interrupted even of the Microsoft site when you try to download windows 7 upgrade advisor.

  Am running vista with IE9 on laptop Fujitsu Siemens Esprimo Mobile

  Any suggestions please?

  Hello Rogerpipe

  Try to disable your temporary security software and try to download the tool Upgrade Advisor. If this does not work then put the system in a clean boot and see if the problem still occurs.
  Steps to perform a clean boot.
  http://support.Microsoft.com/kb/331796

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan