HP 8600: Tray 2

Similar Questions

• OfficeJet Pro 8600 tray 2 does not work

  With plateau, two (optionally) installed and set by default the printer THAT ALWAYS tries to use the Tray1 with photo paper 4 x 6. This will always raise an error that there is a paper mismatch.

  In the literature, I read before buying said that the trays would detect what to print and use the appropriate bin. I can't even manually select trays, it always goes to Tray 1 in any scenario.

  In addition, the detection of HP shows the Officejet Pro 8600 and I don't have it. Also guaranteed test fails and says it expired 4 months before I bought it. I'm not allowed to contact the HP support anything because of this. Last HP product for me.

  Tray 1 is set to the automatic tray pulls the default printer. The printer can detect and select the correct tray, but it must be set up correctly first for her to do.

  In General, I would be created tray 2 with normal printing paper (8.5 * 11) and non-standard of your choice 1 tray with paper. In the printer setup menu you can set up your bin by default as well as the tray lock (prevents a tray automatically).

  Be sure to read the manual on this documentation:

  http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

  In addition, when you print, you must first designate as well in the software the size of paper you want to print on (in this case 4 x 6), as well as through the properties of the printer, make sure you that the correct tray has been selected for use.

  Once this place let me know if this helps you resolve your problems.

  Have a great day!

• HP 8600: HP 8600 does not correct tray

  Hello. I'm having trouble with my HP 8600 is not pulling from the correct tray. This is a recent problem that everything was working properly until a few days ago. I have an accessory to two tray with tray #1 used for special dimensions (photos and envelopes) and standard #2 to 8.5X11paper tray.  I have the default to tray #2 and locked bin #1 in my settings (#1 on the top tray, tray # 2 down). However, when I send a print job for normal letter format, he tries to send the job to use the Tray #1. I can get around this by changing the trays, but it is a real pain and much slower. I checked all software and firmware is up to date. I hope someone has a solution for this problem.

  Hi @Desertboy,

  Thank you for joining the HP Forums!

  I have seen your post on how your printer HP Officejet pro 8600 does not correct status bar. I'm happy to help with this problem!

  Follow these steps to change the print settings by default for all printing from the desktop of Windows 8.

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. Select your new default print settings, and then click or tap on OK.

  Source: change of print settings (Windows 8).

  I would use these settings to set the default to tray 2 for plain paper. So if you want to print to Tray 1, you can change the settings manually. Or, you can add the same printer again in the devices Panel and printers and together this is the default for Tray 1 for specialty paper and rename it to 8600 (Tray 1) as an example.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these settings help!

• OfficeJet pro 8600 more tray insert noise

  Reintegration of the paper made a terrible tray noise of cracking, as if we need to plant through a barrier.

  Hi columbia530,

  Can you take a flashlight and look in the printer to make sure that there is not an obstacle in the printer?  I reinstalled a paper on an 8600 tray here in the office and it has been pretty smooth.  You see anything out of order?

  You can also watch the status bar carefully to make sure that there is not a piece.

  Is - this tray 1 or 2?

• HP Laser 1606, Swap double shelf locations?

  Primary (top) allows up to 20 sheets, while the secondary can contain 250. I am trying to print documents that are either letter and legal. How can I Exchange locations? I need less of mentions of the letter.

  Hi MissVP,

  No, I'm sorry this printer trays are ran by the same printing mechanism. You will need to load a sheet of legal when you want to print legal. Some of our officejet models may come with a second paper like the Officejet 8600 tray. See the link below for more information.

  http://shopping.HP.com/en_US/Home-Office/-/search-SimpleOfferSearch?PageSize=15&search=&searchterm=8600

• OfficeJet Pro 8600: OfficeJet Pro ePrint 8600 - cannot select paper tray - HP needs to fix this problem

  This is a limitation of the software that HP needs to fix. I bought this machine multifunction largely for two features, ePrint, and two bins to paper. I had released two paper because I often need to print on paper thick and does not want to manually load the cards into the printer whenever I don't want to print on thicker paper. Unfortunately tray 2 is not compatible with card stock so I keep copy regular paper in tray 2 (tray 2 is defined as the default tray) and I keep card stock in Tray 1, which is compatible with cards. The problem and the limitation is when I am traveling and want to use ePrint. Even if my default tray on the printer is 2, which is where the paper is, if I use ePrint to print, HP ePrint by default tray 1, which means that I print on thick paper. This isn't only a problem when you travel. One of the advantages of the ePrint, in theory, is I can print on my desktop at home via ePrint printer when connected to my VPN employers. I've had this machine for two years. It seems that HP would have an update now to solve this problem. So far, nothing. Frustrating!

  Hello @HudsonOH,

  Thanks for posting in the forums of HP and welcome.

  I understand that you are not able to choose your paper tray of your HP Officejet Pro 8600 Premium e-all-in-one using ePrint. I would like to help with this, as much as I can.

  Unfortunately, when you simply send an e-mail to the printer, you cannot change the print settings, because it uses the default settings on the ePrint server.

  However, if you have an Android or iOS device, you can download the HP ePrint app. This allows you to add the printer by ePrint e-mail address and send print jobs when you are not with the computer (need you an active wifi or data connection, however). The application also allows to select print settings if you can ensure that you don't waste card stock paper you loaded in the machine.

  To download the app on iOS, simply open the app store and type 'HP ePrint' in the search bar.

  To download the app on Android, you can open the store game (or game of Google) and search for "HP ePrint.

  Once you have installed the application, you can add your printer via his email ePrint:

  1. open the ePrint application and select OK on the demo screens.

  2. Once you reach the home screen, it will show your printer name, or not find printers (depending on whether you are at home with your printer, or on the go). Select this check box.

  3. you will see a tab at the top that says all, select it.

  4. press on the + symbol to add a printer.

  5. Enter your ePrint e-mail address and select Add.

  To print using the application, return to the home screen and select an item to print one of the options listed. Note: If you are on iOS, you can even add your e-mail information in the application so that you can print emails.

  In addition, you can sign up here for updates on the new firmware and software for your printer, in which case no alternative workaround should arise: stay connected with updates from HP

  I hope this helps!

  

• Printing from 8600 second tray of hp

  I can't configure my 8600 so that when I print from my pc it knows Tray 1 size letter paper and tray 2 paper of legal size.

  Hello

  Open Control Panel and go to devices and printers.

  Right-click the printer icon, then select printer properties.

  Open the device settings tab.

  Assign the form to tray assignment as necessary for the differenct bins.

  When you select a specific paper size, the plateau of the target will use according to this setting.

  Shlomi

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• You are looking for 8600 OfficeJet pro replacement paper trays

  Where can I buy replacement bins to printer OfficeJet 8600 Pro Plus paper?

  I'm looking NOT for the paper to Add on tray, but a replacement for the main tray. Mix us different types of paper and envelopes in and out of the state bar throughout the day, and instead, we would like to keep several loaded additional bins of specialized paper to reduce the wear on the main plate.

  Suggestiosn?

  Thank you!

  I searched in the online stores available through HP and was unable to find this part.  However, I could see the part is available through the HP Technical Support by calling in.

  Click here to access the complete list of HP Technical Support phone numbers.

  The reference is more CM749-60036 for Assembly of the main tray for the Officejet Pro 8600.  This part is currently around $25 usd, but the prices are subject to change.

  I hope this helps.

• 8600 does not enter mode tray 2 when Tray 1 empty

  I have a premium of 8600 officejet Windows 8. When I print and Tray 1 is empty, my tray by default, the system does not go to the tray 2 but so called ' paper '.  I have no blocking of the status bar. How can I get the system to pull the tray 2 in 1 is empty?

  My first recommendation is that you visit this Web site and make sure the firmware is updated, also I recommend to uninstall and reinstall the drivers for this Web site as well as another method. In addition, if you have no more paper in the tray first and you try to make a copy directly from the machine, what is?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4323659

  Let me know and I'll get back in touch with you!

  -Spencer

• part number HP 8600 output tray

  My on my 8600 (749n) printer output tray is broken.  What is the spare part number?

  I am including a direct link to a paper for your printer tray.

  Let me know if it helps.

• OfficeJet Pro 8600: I opened the paper tray; now, he will not go back and will not go out. He's stuck.

  OfficejetPro 8600: I opened the tray paper.  Now the tray won't go back and won't go either.  It's coming out about 6.5-inch printer is currently a big paperweight.

  My 'solution' in 2012 had to take printer to Best Buy where they replaced my printer that was a few months old at the time.  I had no other problems in the last two years with the status bar.

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• OfficeJet Pro 8600 Premium - paper tray automatic selection according to the size of the paper

  OfficeJet Pro 8600 Premium, Windows 7

  How to setup the printer such as when I'm sending a legal document that automatically selects the tray 2 (legal paper in tray 2). Tray 1 is the default, with letter-size paper tray. In 'device settings' Tray 1 is set to letter and tray 2 has the legal value.

  Thank you!

  Greg

  Hi Greg,.

  At present, the 8600 does not support this feature of Microsoft. Unfortunately, there is no work around. You must manually select tray 2:

  1 Ctrl + p to open the print dialog window.

  2 Select the printer of desire and click the preference.

  3. go tab paper/quality, then select "Tray 2" on the decline of the Source of the paper in the menu dropdown.

  See you soon,.

  Kimu

• Is 8500 250 sheets tray compaible with 8600?

  I replaced a HP 8500e JO wireless all-in-one with a HP OfficeJet Pro 8600 Plus all-in-one wireless (model N911g).

  The old 250 sheets (model CB802A) paper tray will work with the new 8600?

  Thanks for your help, Dorothy

  Hi DorothyC,

  I understand that you wondered if the paper tray for the wireless HP Officejet 8500e would work for the HP Officejet 8600 N911g, I'm sorry, but it won't.

  The physical dimensions shows that printers do not match, so the paper tray does not work.

  HP Officejet 8500e

  Width	502 mm (19.8 in)
  Depth	472 mm (18.6 inches)

  HP Officejet 8600 N911g:

  Width	494 mm (19.4 inches)
  Depth	461 mm (18.1)

  I hope this information has helped. Let me know.

  Thank you