HP BL490C G6 / NC553M / Virtual Connect Flex-10 / frames not subproject

Similar Questions

• ESXi 4.1 and Virtual Connect (Flex 10): no network statistics

  Hello

  I use ESXi 4.1 (build 348418) on HP BL460G6 (c7000 enclosure), with HP Virtual Connect servers.

  I am satisfied with the introduction, and everything seems to work. (traffic comments vMotion, StoragevMotion, etc.)

  However, when I look at the tables of performance in vCenter, the performance of network information shows nothing.

  Each vNic, every statistic is 0.

  When I asked on the HP Veforum 2010 stand in Sydney, I found that they were the same thing! (but they did not know why).

  Everyone has found and overcome this problem?

  I applied all the tasks that I can find, but it remains the same, and I'm WonderingWhy.

  Thank you!

  I had the problem and used bnx2x - 1.62.15.v41, 2nd in the link.

  It worked for me. I hope this helps!

• Virtual Connect FlexFabric: Virtual Connect with VCEM FlexFabric

  Hi, we have a C7000 chasis with 2 Virtual Connect FlexFabric, managed by Virtual Connect Enterprise Manager.

  It is already configured and running.

  Now, we need to stack a new C7000, with 2 new Virtual Connect FlexFabric.

  Connects existing virtual have 4.10 version firmware, and the new come with firmware version 4.30.

  I read the "Virtual Connect multi-boitier stacking Reference Guide", but it doesn't explain how to do the standard Virtual Connect Manager, of VCEM.

  Beeing a newbie to Virtual Connect there are some things I'm not sure.

  I can do Virtual Connect Manager stacking, or what I do leave VCEM?

  Should I upgrade any virtual links (old and new) to 4.31 before stacking, or I can do after stacking?

  Is it possible to downgrade new virtual get connected to 4.30 to 4.10 so I can stack them without updating those running?

  In the reference Guide, it is not clear whether I should cable stacking links before or after the addition of the new VC domain. When I should them cable?

  Thank you.

  Sorry, but your question is well beyond the intended scope of the global customer support forum.  I suggest this announcement on the HP Enterprise business forum.

• ESX uses network adapter with the mac address that is different than virtual connect reports

  Hi all

  Our ESX environment consists of HP C7000 enclosure, virtual connect 1 gb ethernet with a mixture of BL480c and BL460c. We just bought some new BL460c G7 with NIC NC553i to replace some of the oldest BL480c. We have configured Virtual Connect to assign mac addresses. In vc management consoleI see the addresses assigned to the server, but when I start the server displays a different mac address for nic #2 that vc does. NIC #1 has the same mac address of console management vc and in the server BIOS. When I install ESX also sees the 'wrong' for #2 nic mac address. According to vmware nic #2 has not any network connected to what should be if it was really nic #2 (according to the vc management console).

  When I look at the mac addresses in the BIOS none of the network interface card have the mac address assigned by vc. VC firmware is 3.01. I have attached the photos I see information in the management of VC and BIOS console. Someone at - it for clues to what is happening and how can I solve it? Thanks in advance.

  Kind regards

  GB

  Please refer to:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1001167

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  To determine the MAC address of the interface Board of the ESX host, run the command:

  # ifconfig | grep-i hw

  The output looks like:

  vswif0 Link encap HWaddr 00:50:56:41:5 A: 59

  The MAC address is in the first line after HWaddr.  In this example, the MAC address is 00:50:56:41:5 has: 59.

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  You can also review the output information and the esxcfg-NICS - l order MAC addresses.

• Unable to connect to MKS: virtual machine configuration file does not exist

  Guys,

  Need a little help I'm running the following

  vCenter Server 4.0.0 (build 208111)

  ESX Server 4.0.0 (build 208167)

  I have a computer virtual running WIndows 2000 Advanced and when I try and open the console I get a black screen and the error message following

  "" Unable to connect to MKS: virtual machine configuration file does not exist '. "

  I scoured the data store and all the files of the virtual machine appear to be in place, I thought deletin the virtual machine from the inventory and add the vmdk file, it would be a good idea?

  Thank you.

  Remove and add new inventory won't hurt (you could lose data historial for virtual machine), it probably won't solve the problem.

  I doubt, it is a problem with the .vmx file, but you can try:

  -Remove the VM of the inventory

  -To create the new virtual machine (with the same characteristics as the virtual machine that you removed), name it differently and do not add hard drives that it

  -Change the new VM settings and add the existing VMDK virtual machine that you deleted

  -Power on VM and try

  • You should always have your complete file to the virtual machine original intact, in case you need, you will always have your original vmx file to add it to the inventory.

  By doing these steps you re-create the vmx file.

  f this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• ITunes store does not connect and then does not close help please

  OK, so pretty much whenever I try to enter the Apple store that I get a little pop-up that says it can not connect to the Itunes store, I have to check my connection and try again, but whenever I close this box it appears immediately back to the point I can not even close Itunes with having to go Task Manager and ending the process manually.  I can't use the store at all and it's just getting really frustrating, because I know my connection and everything is not fine so it is no reason for this pop up.

  is anyone else having this problem or if you have had this problem and know how to fix?

  Hello LadyJibril,

  Thank you for using communities of Apple Support.

  I see that you have problems connecting to the iTunes Store. I would recommend from the suggestions in this article: If you can not connect to the iTunes Store

  If that doesn't help and you still have questions, then you can proceed to the procedure described in this article: Advanced steps for fixing iTunes Store connection issues

  Best regards.

• How can I change my password for connection of Firefox? (Not the master password for the Firefox links saves itself)

  (1) how can I change my password for connection of Firefox? (Not my main password for things Firefox stores)
  (2) how can I change my password for connection of Thunderbird? (Not my master
  password for things Thunderbird stores)
  Just answer (Email removed by mod)

  You don't have to log in to Firefox. Firefox is just a browser, such as Internet Explorer. Everything you have to do is double-click it and open it. It's like Internet Explorer. If you have some sort of password extension protecting your Firefox, it's different and you need to contact the developer of the extension.

• WiFi connect using WPA2 but not not using WEP

  I am trying to connect to my wireless router but I HAV that he set for a security code WEP and whenever I try to connect it says could not connect.
  When I used my nintendo ds to do the same thing, it worked and if I change my WPA2 it works but then could not connect my ds.

  Is this something im doing or is the laptop please help me.

  Hello

  Perhaps you could provide some details about your laptop model and the BONE that is preinstalled on this laptop?

  The operating system is up to date?
  The local laptops network card supports WEP encryption?
  Have you used the correct encryption code?

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• 5740 OfficeJet All in One: 5740 printer OfficeJet connects but scanner is not on the wireless network.

  Hello

  I recently bought the above printer and the printer connected most of the time, the scanner becomes more reluctant on my wireless network.

  I just printed a document yet when I try to analyze only one or two seconds later I said it has not detected to scan. I don't know how the device connects - but because the printer connects OK probably is not a wireless connection / router issue?

  The only solution I found to this problem is to restart my system which is quite frustrating and not an acceptable response to long term. When I do this the scanner seems to operate normally, at least for a while.

  I installed all the software from the Web site, including the HP utility - yet I am also told that "computer scan can not be activated" because the software is not found - which is strange, because I installed all the software available.

  Any suggestions?

  Hey there @gggdfsdfsdaf!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions on the 5740 Officejet and its communication of scanning.  There may be a slight problem with the software.  I suggest you uninstall the HP software.  Once the software uninstalled I recommended to perform a "repair disk permissions" on your Mac.  A repair disk permissions is a utility built into the operating system Mac designed to detect and resolve problems or errors. After that permission to repair disc is finished, reboot your Mac computer and re-install the software.

  To uninstall the HP software, click: uninstall the HP software

  To perform a repair authorization disk click here: repair disk permissions

  To download the Officejet 5740 software, click here: 5740 Officejet full feature and driver software

  After the installation I recommend that you check the software updates on the Mac.  To search for software updates, click the icon "Apple" to the left and click on the "app store".  In the app store, you can click on the "updates" at the top of the window.  Updates install and Hp or a printer.  After the update, you must restart the computer.

  You can also launch scans of an application on the mac, called 'Image Capture'.  For Image Capture click "Spot Light" (magnifying glass) in the upper right of the Mac.  Image capture type and it should appear as one of the first options.  Open Image capture and on the left side of the window should display your scanner.  The scanner can be listed under 'shared '.  Select your scanner and you should have the options and settings on the right side for scanning.

  Please post back and let me know if this worked for you!

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Can't send or receive messages on behalf of Live.co (apermaculture). The connection name specified does not exist or your password is incorrect.

  Can't send or receive messages on behalf of Live.co (apermaculture). The connection name specified does not exist or your password is incorrect.

  Server error: 0 x 80048821
  Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0 x 80048821

  Hi Nic of Necker,

  When you use Windows Live Mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Mail Forum

  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  I hope this helps.

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• WRT54GS2 v1 connection expired and server not found

  OK I got the connection expired issues and server not found on both my PC and my Laptop.I I use Zoom ADSL ISP x 5 provided. series 1605. I have a router Linksys WRT54GS2. I followed the installation program in full and was surfing without delay. The problem started there when I bought the router and plugged in about 5 months. I already spoke with technology specialists to my ISP and they said that I have an excellent DSL connection and they have not seen any problems at their end. I had disconnected the router completely my network and removed the Ethernet cable and hooked the cable directly to a DSL modem and had no problems until I plugged the router in the modem. I factory reset the router a few times and implemented accordingly to make sure everything was good. Well, I still have errors in time-out for laptops and PCs. I have tried almost everything in the book and I'm out of ideas. Am I missing something here? Any help would be greatly appreciated.

  I tried changing the settings through the router and nothing seems to work. I checked both PC and laptop computer for viruses and nothing. I talked to my ISP and they tell me that my DSL connection is excellent and which was not disconnects or connection has expired at their end. It is located between my router and two computers. An Ethernet cable is plugged directly from the computer to a DSL modem. And an Ethernet cable is connected directly to the rear of the router. I am just totally stumped. The internet is totally fine when I cut out the router completely. I have no disconnects when the main PC is connected to the DSL modem with router disconnected completely. I have reset the router completely and followed Linksys technical support online for the T and I still get the connection has expired. Initially, I got a Belkin wireless router and thus became the message timeout through it. I thought something was wrong with this one so I went out and bought a Linksys WRT54GS2 router Linksys Wireless G. can someone offer some advice or ideas that I have not already tried? Please? The wife and I are really frustrated.