HP broken screen need to connect in safe mode, but I don't see anything in WHAT normal HDMI

Similar Questions

• My devices are connected, but I don't see anything on my iPad

  Hi all

  It seems that my devices are connected, I'm visible iPad and Chrome extension on my iPad, I can see my computer name in the upper central part of the dashboard app inspect. However, it is just black page. Nothing happens while I browse through the pages on my computer. What could; d be the problem? I am browsing of external pages. It would be a proxy issue?

  Thank you

  RK

  And of course, I found answer to my other question ;-) When you click on 'inspection remotely' I didn't know that it opens in a new window - Weinre app with icon Edge inspect CC.

• computer is stuck in the screen that lets you choose Safe mode or start normally

  Original title: stuck

  My computer is stuck in the screen that lets you choose Safe mode or start normally. When I choose that it just goes back to the same screen. stuck in this screen

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• I get BSOD after Bios flash, can connect in safe mode.

  Hi all

  I use a laptop HP DV3145 DX, OS is win 7 Home Basic (it came with the laptop).

  A few days ago my screen started to behave erratically. The lower part of the screen is blurred and was unreadable. So I have updated Bios with the HP support assistant.

  After I flashed the bios, I could connect to windows, but every time I log on to the windows it crashed (BSOD) after 30 to 60 seconds.

  I could connect to the computer in safe mode

  That's what I did

  1. connected in safe mode and disabled all startup program (used Msconfig), with the exception of microsoft. This did not help.

  2 activated the player HP_tools disk management and I see the Bios, Bios_new file is there.

  Now, what should be my next step? I want to factory reset as my last option, I have a lot of settings, digital certificates, backups of phone in this machine, those who are important to my work.

  I think to Flash the Bios to the previous version to see if that helps. Now, I don't consider myself a very experienced user. So if anyone can tell me how to Flash the bios to the older version, I'll be grateful.

  I would also like to hear any other suggestions, others may have.

  * PS: I can't update windows drivers (I've updated about a month ago), because the 3 G dongle that I use is not having recognized in safe mode.

  Thanks in advance,

  Magassa

  You should not have flashed the BIOS. Updating the BIOS is not a magic solution to all the problems. You must perform as the first response to a problem with your laptop because it adds an element of risk.

  You should use the diagnoses instead. Press the power button and immediately press the ESC key. In the start menu, choose to press the F2 key to invoke diagnostics. Perform a system test, a test of memory, a hard drive test and a test video.  Let us know what are the results of the diagnostic test. The image is a more recent version that is installed on the hard drive of your laptop, but is still pretty similar.

  

• Black screen, does not start in safe mode - how do I restart my mac

  Hello, I have a MacbookPro, that all of a sudden will not start. I believe that the problem - from what I've read-, is that memory is simply too fulll. I tried to start in Safe Mode, but of course it doen't work. The screen displays a small bar as it loads, but after a while goes back to the same blank screen and nothing happens. I tried waiting half an hour, but nothing changes. I have not tried to launch utility disk in Recovey Mode because I'm afraid of what will happen to my files. Unfortunately, I unwisely postponed to back up files and now I'm afraid to do anything that my fry them all without me even realizing it. Can you offer any solution that is as safe as possible?  I don't have a cable Thunderbolt.

  Thank you

  If you think that the MBP storage is full and not allowing you to start, try the target disk mode:

  https://support.Apple.com/en-us/HT201462

  Ciao.

• can connect to internet in safe mode but not in normal mode

  Hi all... I use windwos 7 ultimate...
  My problem is I can connect to the internet in safe mode, but unfortunately I can't connect to internet in normal mode...

  I have try several step to address this problem, but it seems is no good at all, and for your information guys, I format my laptop 4 times.

  and I update my network driver.

  I use kapersky 7 and malwarebytes even they cannot detect virus or trojan etc which are harmful to my laptop...

  Please help me guys

  Try this:
  -Click Start
  -Type the word msconfig in the search box and press enter
  -Uncheck the box each tick on the Startup tab.
  -Click the Services tab, then check the box hides the Microsoft services.
  -Uncheck the box each remaining tick.
  -Reboot the machine.
  -If this problem, restore the ticks in groups of 8 until you find the culprit.

  ATTENTION: If you connect to the Internet without a router, then you MUST make sure that your Windows Firewall is active. If it is inactive then you will expose the machine to the pirates.

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• MacBook pro works well in safe mode but freezes in normal mode

  Now I'm in safe mode, but if I restart in normal mode. It freezes.

  I have chosen of all the startup items.

  I ran the diagnostic test suggested by Linc Davis report.

  Start time: 10:29:16 04/30/16

  Model identifier: MacBookPro11, 1

  The system version: OS X 10.11.4 (15E65)

  Kernel version: Darwin 15.4.0

  Start mode: security

  Integrity of system protection: enabled

  Since the starting time: 10 minutes

  FileVault: on

  Diagnostic reports

  2016-04-06 CudaDriveInstall crash

  2016-04-06 GoogleTalkPlugin crash

  2016-04-06 IMDPersistenceAgent crash x 2

  2016-04-06 ReportCrash crash

  2016-04-06 cloudd crash

  2016 04-06 com.apple.CommerceKit.TransactionService crash

  2016-04-06 recentsd x 5 accident

  2016 04-06 suggestd accident x 5

  Crash of Microsoft Error Reporting 2016-04-12

  2016 04-27 com.apple.WebKit.WebContent crash

  Journal

  30 Apr 09:13:45 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).

  30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level

  30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit

  30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207

  30 Apr 09:53:12 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level

  30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit

  30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9

  30 AVR 10:17: 47 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6

  30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)

  30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.

  30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf

  30 AVR 10:20: 05 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).

  Demons

  com Apple.Installer.osmessagetracing

  launchd

  / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

  -com.cisco.anyconnect.gui

  / Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist

  -com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent

  /Library/LaunchAgents/com.Google.keystone.agent.plist

  -com.google.keystone.system.agent

  /Library/LaunchAgents/com.TeamViewer.TeamViewer.plist

  -com.teamviewer.teamviewer

  /Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist

  -com.teamviewer.desktop

  /Library/LaunchDaemons/com.Adobe.fpsaud.plist

  -com.adobe.fpsaud

  / Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

  -com.cisco.anyconnect.vpnagentd

  /Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist

  -com.cudadrive.cudadrivesvcd

  /Library/LaunchDaemons/com.Google.keystone.daemon.plist

  -com.google.keystone.daemon

  / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

  -com.microsoft.office.licensing.helper

  /Library/LaunchDaemons/com.TeamViewer.helper.plist

  -com.teamviewer.Helper

  /Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist

  -com.teamviewer.service

  Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist

  -com.citrixonline.GoToMeeting.G2MUpdate

  Beams

  /System/Library/Extensions/JMicronATA.kext

  -com.jmicron.JMicronATA

  / / Library/Internet Plug-Ins/Flash Player.plugin

  S/O

  / Library/Internet Plug-Ins/googletalkbrowserplugin.plugin

  -com.google.googletalkbrowserplugin

  / Library/Internet Plug-Ins/o1dbrowserplugin.plugin

  -com.google.o1dbrowserplugin

  / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

  -com.microsoft.sharepoint.browserplugin

  / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

  -com.microsoft.sharepoint.webkitplugin

  / / Library/Internet Plug-Ins/Silverlight.plugin

  -com.microsoft.SilverlightPlugin

  / Library/PreferencePanes/Dell 2155 Color MFP.prefPane

  -com.dell.scan.Dell2155ColorMFP.prefPanel

  / Library/PreferencePanes/Flash Player.prefPane

  -com.adobe.flashplayerpreferences

  /Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle

  -com.teamviewer.AuthorizationPlugin

  / Library/Widgets/Status Monitor.wdgt

  -com.dell.print.statusmonitor.widget

  Library/Address Book Plug-Ins/SkypeABDialer.bundle

  -com.skype.skypeabdialer

  Library/Address Book Plug-Ins/SkypeABSMS.bundle

  -com.skype.skypeabsms

  / Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin

  -com.citrixonline.mac.WebDeploymentPlugin

  Content of/etc/hosts

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Featured: indexing and search disabled

  Firewall: on

  Small files: 43

  Time elapsed (s): 272

  If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• sentence has installed automatic updates and it says I can not enter password, if I says can not find the file I can log in with password safe mode but not normal mode

  I can connect in safe mode, I tried to set up another admin user, but he says the same thing that I can't connect in normal mode

  Try the following steps:

  a. create a new user account without password in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  b. start in normal mode.

  c. create another user account with the user created in safe mode a/c and set a password.

  d. try to connect to the user account password.

  Still the error?

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• I can access the internet in safe mode with networking; then for a short period in normal startup; but then I lose online access.

  Windows XP: internet connection

  Windows XP: I access to internet in safe mode with networking; then for a short period in normal startup; but then I lose access (IE8, Google, AOL) online. I tried several times, sometimes it seems able to stay online as long as I'm using the installation, but if I take a break, I lose access and return in safe mode.

  This question is submitted in safe mode with networking

  Hello

  Normal mode try to know what actually is the problem with the Internet connection and the components involved.

  Maybe this can help.

  For the wire connection - http://www.ezlan.net/debug.html

  For a wireless connection - http://www.ezlan.net/wireless.html

• Vista opens in safe mode but can not repair or data rescue

  After switching on my Sony Vaio and see the logo Vaio pc screen displays the option of safe mode. by choosing the option of safe mode not repair defects or not save the data. Screen turns white and then thin displays at an equal distance vertical green lines. After a while the display briefly shows recangles red and turns off again. After a few minutes, a blue screen with white text will appear informing that a problem has occurred and a shutd = downwards to protect windows. Even if I press f10 launch the same aoours, suggestions how to solve this problem?

  Thank you.

  Hello

  These elements suggest corruption graphics driver or graphics hardware fault. Material most likely that she does in Mode safe.

  Because it's a laptop; If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• I have created a VPN connection and it worked but you can't see how to remove Windows 7.

  Delete the VPN connection

  I have created a VPN connection and it worked but you can't see how to remove Windows 7.  I tried rt-click but no delete option.

  Open network and sharing Center. On the left side, click on change adapter settings. You will get all VPN connections that have been created and you can delete what you don't need.