HP C7280-ink smear

Similar Questions

• HP Photosmart C7280 ink system failed

  Ink failure system 0xc18a0206 error, can someone tell me what this message means?

  Hi Jorge62

  You can try the suggestion of Bob here...

  (Please let me know how you go)

  Thanks, Ciara

  http://h30434.www3.HP.com/T5/ink-cartridge-and-printhead/Photosmart-C7280-ink-system-failure-will-not-print/TD-p/720845/highlight/true/page/2

  There is a hidden menu support with a reset replacement procedure that can help: power on, press both the # and * buttons.  The screen should say something like "enter the special sequence".  Currently, press 1 then 2 then 3 which will bring up a menu of support.  Use of the < and=""> the arrow keys to navigate the menu that says "Hardware reset" or some similar.   Once reset the hardware has been selected, press OK, OK.  Once it is finished press Cancel (X) to move up one level in the menu, then scroll down to find "ink initialization", then press OK.

  This model has a permanent printheads which cannot be deleted (or replaced). Unfortunately, I didn't know all the solutions beyond the reset of the printer, if the option is to fix the printer.

  As you have noted, it is not likely to be economic for this model.  If contact you HP they may offer a discount on a printer replacement, although I've seen people indicate that careful shopping can beat the discount price of HP.  AFAIK there is that no HP models currently use fixed print heads, these have replaceable user in current models.

  The "abnormal termination" message will occur any time the printer has an error with a code (0 x.rror) assert condition.  At this point, the confused printer and do not realize that the power to close properly.

• Maintains C7280 ink system failure 0xc19a0035 error... Help!

  Hello, I've owned this printer c7280 for three years. Lately, my printer has received periodic errors preventing any impression until I have shut down and restart. The error message reads:

  Ink system has failed. Cannot copy, receive faxes or print. Refer to the printer documentation.

  Error: 0xc19a0035

  Stop the power, then on again.

  When I reboot, printers works fine for anywhere between a few minutes to an hour before this same message back to the top. Sometimes, when the printer is not used at all, it suddenly shows error message. The moment that I think is random. Other times, when I try to print from my computer, the error message appears on the printer. I am still able to print pages, but I have to restart the printer if the error appears.

  How can I fix it? Any help will be greatly appreciated!

  Here is a link that will help you on "ink system failure".
  http://goo.GL/V2qlP

• Levels of HP C7280 ink &amp; put cartridge software/driver?

  Since the day one on my renovated with printer all-in-One extended warranty C7280 cartridge estimated ink level have indicated/felt empty.  At the time and after replacing the printer once again I finally learned by a supervisor of the support phone HP that the factory provided ink cartridges were special and because they were not full, first, estimated ink levels would be would not read.  so... I waited and waited and finally black ink ran out and I replaced it with a new cartridge in date, which worked well but unfortunately its estimate of read ink level empty too.  so... I continued to wait and finally Magenta and Light Magenta down dry and I replaced with cartridges date and still none of the ink level estimates register.

  Although I suspect something wrong with the printer along the cause is it possible I neglected/was unaware of a simple fix to get these read levels now?

  I read the levels of ink directly from the screen on the printer.  No need to use the software Connectivity PC side.  Besides, because of other unresolved problems I uninstalled software applications and uses only the drivers.  This leads to the second question/problem...

  After the support of futile attempts to fix wireless phone another supervisor told me that HP has been in the weeks, releasing an update of the v12 for my printer software.  He had lied because this v12 software released on other printers, but not the C7280 and its nearest summer for one year.  I would like to know if anyone knows what are the intentions of HP?  V12 will be always available for the C7280?

  Unfortunately, with HP I found it much easier to ignore the problems I had and work around them then spend time futile with offshore technical support.  What a WASTE of the industry does discover offshore support at low cost.  They got what they paid for and we had trouble.

  Progress...  There is a simple solution for ink cartridge levels is displayed not correctly - only vacuum for the last 10 months.  However, there was no reason given as to why HP does.  A few days ago, a phone tech took me by making a hard printer factory reset where you unplugged the uinit, then all by pressing the "6" and keys ' # ' plug the power back in.  For the first time that the ink levels read their correct estimates and the self-assessment report showed these values too.

  Unfortunately with the fluid level reading this thread to find out that 3 of the 6 spare ink cartridges I bought 10 months ago and had to start using some 2 months ago where not full.  In fact the yellow cartridge I replaced two days ago to read only 53% full immediately.

  I tried to get HP to compensate me for these three cartridges partially filled and finally spoke to a support engineer in the United States without result.  However she told me that these renovated C7280 printers have been sent with the function of liquid ink level disabled on purpose but did not say why.  She said that the early support should have reset the printer 10 months ago, I agree.

  In the end, Office Max, where I bought the original printer, exchanged the three ink and cartridges for the first time the icons on the screen of the printer ink cartridge all disappeared.  In fact, I thought it was now a new problem, but apparently that's normal when all cartridges are more than 50% or so full - at least that's what said this same technical support engineer.  And for the first time, the self-assessment report has listed all levels of ink to 100%.  Is everything working now?  Time will tell.

  (So restore the printer to Ethernet and using only the printer drivers base v 10 [no printer installed software apps] I don't have to reset the router periodically during print jobs wouldn't last and I feel a printer real reliability back finally.)  It's also I think as my first post here in the forum HPs I checked "resolved."  Also...  I do not work for HP... "and do not like their offshore phone support).

  Message edited by Star 06/08/2009 08:46

• HP C7280: ink cartridge access door is open

  Hello

  My HP Potosmart C7280 AIO (all-in-one) is stuck with an error message.

  Door open

  Ink cartridge access door is open.

  I have reeived a printer replacement in support of July 2008 and HP will not help because my original printer was purchased in Dec 2007.

  Google did not help

  Search HP support site did not help

  User manual did not help.

  I also tried this:

  power off

  Unplug the power cable

  Wait a minute

  Press and hold the "#" and "6" keys

  Plug in power chords

  Be patient

  Wait for the white screen out.

  Release the keys #6

  Press the button power

  ... all of this in the hope that a false alert will disappear. There NO :-(

  Experts out there?

  Is - this firmware/hardware translation?

  In the future, I'm not spending a dime more with HP unless this issue is resolved in a satisfactory manner.

  Help to get forward.

  Pete

  Message edited by prnthlp on 05/21/2009 12:27

  I also sent the email below to HP support and hoping that someone will help.

  Sent by e-mail E-mail form
  Please contact the e-mail HP support

  Thank you for sending your e-mail to the customer of Hewlett-Packard. You will receive a system generated acknowledgement [[the lapse of time, may vary by region]]. If you do not, please resubmit take extra precautions to make sure that you enter a valid and functional e-mail address.

  If you have additional information or request for information, please contact HP

  
  When did you purchase your product? : 2008

  Product HP Photosmart C7280 all-in-One Printer

  Select a problem area: error messages

  What is your serial number (SN): MY82NH43NC

  What is your operating system? : Microsoft Windows Vista Home Premium 64

  How your product is connected to your PC? USB cable
  
  If there is an error message, please specify:

  Door opening / Inc. cartridge access door is open

  Description of the problem: the ink cartridge access door is not open, but this post just won't go away! The printer is in normal state (not open) and I am ready to print. How can I get rid off the coast of this message. Help, please.

  Please provide previous steps of troubleshooting, or information that can help HP help you. :

  I tried to plug the printer in holding together the "#" and "6". In the past it has helped to solve other problems of the firmware, but this time the message "access cartridge door is open" message remains on.

  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): Nop.

  How would you describe your level of technical skill? : Advanced

• C7280 ink counter does not work

  The ink on my C7280 wife meter does not record ink, even with new cartridges. It also does not generate a down or ink messages. Any ideas?

  XP - Pro SP3

  print USB or wireless

  Message edited by WLK 17/03/2009 17:00

  I did the cold Reset and ink counter works!

• ENVY 4250: Ink smear/wet on photo paper

  WHENEVER I TRY TO PRINT PHOTOS INK DOES NOT DRY AND IT BLEED OFF PAPER, EVEN THOUGH I LET SIT FOR DAYS.

  There are a few things to check to the address ink not dry on photo with your Envy 4520 printer paper:

  • Make sure that the correct Photo paper type is selected in the driver paper/quality tab.  If you are printing on Photo paper with selected plain paper it does not correctly ink and black areas not dry not properly.
  • Make sure that the photo paper you are using is designed for inkjet printing.  Unless the photo paper has the coatings suitable for inkjet printing it will not dry not properly.
  • Make sure that you print on the right side of the photo paper.

• loss of DJ 1000 of ink, smear after about 6 pages

  We had only the printer a week, already, we had to buy another cartdige, we printed less than 100 pages.

  It's like the 122 cartridge. It's that they send to Africa.

  If your print say 10 pages on page 5-6, these missing or burrs of printing to halfway to the bottom of the page.

  You can change the cartdiges of the 61 301 0r? Here the cartridges are expensive.

  I took out the cartridge and nozzles was covered in ink, it was not a very thin line only a mass of ink. We have the only printer in black, buy the color cartridge is empty, once again, when we took that it was covered in red. It's like the cartridges are out.

  Any ideas please.

  WR pete

  Unfortunately, no, these cartridges are not only not interchangeable, they are also designated by your geographical location. If you had the original cartridge in the machine, then it can have a configuration also lower-capacity cartridge, the cartridges have an estimated number of impressions they can do, but the number fluctuates on the content of what you print as well as the quality.

  I would recommend changing the settings of the printer preferences so that it prints in draft mode that will maximize your printing capabilities.

  http://printscan.about.com/od/HOWTO/HT/Draft_Mode.htm

  Just to Printers and devices ' folder and right click on the printer, then in the preferences under "Paper/quality" you can change the density of the ink.

  I would like to know how this happens and have a wonderful weekend!

  -Spencer

• Regional C7280 ink cartridge reset Setup

  I read in other posts that when you move to another country with your CV, to do a regional reset. Well, I found that the way lasts. I have a Photosmart HPC7280 bought European and living in the Middle East (where the cartridges for this model are not sold), I decided to buy the cartridges HP02 of United States. I spent a fortune on shipping... only to find out that they are not compatible with my printer because of regional setting!

  How can I do the reset if my printer is no longer under warranty? I think it's alarming that HP only offers the service for products under warranty!

  @ DiabloZ - I'll send your question to the persons concerned. They will be in touch with you through the forum private message Inbox.

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• DeskJet 3520: no black print with new ink and genuine cartridge is full

  No black print with genuine new cartridge ink level shows and complete.  Many other colors are printed. This happened after I made the print heads clean and clean ink smears.

  Thanks for the reply

  Now, if you were to call to our technical support team, they should be able to implement a replacement for you for this printer model, regardless of the status of the guarantee.

  Call them and let me know how things are going for you!

• printer does not print black not ink and paper gets stuck

  Hello

  My printer won't print anything in black ink from last night. It prints color very well and my black ink level is good.

  In addition, it starts to get a lot of paper jams. I use regular copy paper.

  Ive tried the printer alignment and cleaning the ink smears, but that does not work because as I said the paper gets stuck.

  My printer is hp officejet all-in one printer-4630.

  Help, please! I really need to print something tonight!

  In the paper here troubleshooting steps can help solve the black print is not in your Officejet printer 4630.

  In a pinch, you can go to the configuration of the driver and select the type of paper Photo paper.  This will use the color cartridge to print in black.

  Problems here, the document includes information to treat the paper jam .

• HP printer model k110a INK PROBLEM

  Hello people!

  I'm having this problem with the model of HP printer (Deskjet Ink Advantage 2060 all)... I bought it just because of its cheap ink cartridge and now it's the BIG problem.

  For this stupid ink, I had my black ink smeared anytime I pinned, touched with a bit of sweat on the hand and as photocopied kena if I write something that precedes the paper... and the quality is right etc... as newspaper quality and perhaps worse than?

  the used ink cartridge is 704.

  So, anyone could contribute to improve the quality? Maybe I need to fit in the printer setting?
  Or, can anyone tell me is it possible if I change the cartridge to another model?
  Or, is it advisable to change it in external ink?

  I want this printer to fix... desperately...

  PLEASE HELP ~ ~!

  Thank you very muchiii ~!

  wenxt, have you tried going to the Printers folder on your computer (sometimes called "Devices and printers" or "printers and faxes" depending on your operating system) and by changing the printer preferences?

  Find the copy of your printer and right click on it. Go to "Print Options". Here, there should be a tab of quality, and you can select your printer to print in draft mode. This should reduce the risk of smudging.

  Also, the impressions with considerable amounts of ink will be dry longer than plain text documents. Don't forget not that you give the documents that you print the appropriate amount of time to dry.

  Let me know if it helps!

• Photosmart HP 6510 impressions have ink on them!

  Hello.

  I have the printer wireless HP Photsmart 6510.  Lately, the impressions of it were of very poor quality, there was ink stains and streaks on printed documents, sometimes I need to print some stuff about two or three times to get a version that is good enough to use.  Tasks tend to occur around the same area, to the right of the center of the page, and the veins, which occur less often, going from one side of the page to the other.

  I only ever use ink HP, never a third party ink cartridge, and I do not have the refills.  I did a printer head cleaning process, but it's not better.  I have to admit that I am very disappointed because I am a user of HP printer long life and this is the first time, we gave poor results.  I can't afford to just go out and replace the printer so I have to stay with it, but I need to get these tasks and sorted streaks because is it costs me time and money having to repeat things two or three times to try to get a copy, which is as clear as possible!

  Here a link to a document that deals with poor print quality for the printer model that you mentioned in your message. It will give you trouble shooting to try to correct the poor quality output that you get from the printer. When you repeat the print head cleaning utility, be sure to make all levels of available cleaning. Each level offered cleaning is more energetic in trying to erase the hooves of the nozzles. Did you manually wiped the cartridge and the contacts inside the print head to ensure that accumulate only not part of the problem with the release of the printer? It is also a clean ink smear tool located on the front panel of the printer you want to use. To Access Setup button > tools > clean ink smears. Make sure you have letter paper own size loaded in the machine. This process can take several minutes to complete. I hope this helps.

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.