HP CLJ Enterprise 775z: HP CLJ Enterprise 775z TWAIN Driver needed

Similar Questions

• Vs Enterprise Desktop Hard Drives

  It really worth the extra cost to go with the company of the hard disks, especially when used in a RAID?

  After in office drives a few years when the price difference was half, but now this difference (although still important) is no longer that much, I wonder if it is useful to readers of the business for the added rliability.

  Admitedly, I didn't have problems over the past four years with failed drives in my existing RAID arrays.

  See you soon,.
  Michael

  Michael,

  I have no definitive answer for you, opinions on this seem to differ, but let me give you three examples of persons with very large paintings in their system, who have no problems with consumer drives.

  Baz, Studio North and myself use 12 + Samsung Spinpoints consisting of drive bays, F3 and F1, respectively, and Bill Gehrke uses an array of same of grand - IIRC - Seagate 7200.12. None of us has never had problems with our tables.

  With the number of disks involved the price difference in total consumer and business records and saw the negative effects on one of our raids of parity. Beware however that the same does not apply to the WD black Caviar, there are many reports on problems with TLER which makes them unsuitable for parity RAID but reports say that, for raid0 configuration, they are OK.

• CLJ 5550dn: fuser for CLJ 5550dn

  I have trouble finding the correct fuser for my HP CLJ 5550dn printer. I need one with cutouts for the release of unit eliminator levers discharge of static electricity. Is there a part number special for this merger? I ordered the Kit merger HP 645 A 110 volts (Q3984A) from Staples. It says it fits my printer, but it is not because there is no pre-cut for the unit. Thank you.

  Please post some better pictures as the output.  We should be able to see the 2 screws in the two editing photos.  Also take a picture of the machine on the side of the fuser unit.  It is possible you've got unity merger for the 5500 and not the 5550 either by a mistake or wrong fuser.

• Problem with Inspiron 15 3537 AMD Radeon HD 8670 M Driver for Windows 7 Enterprise 64-bit

  Hi team,

  I bought this laptop a month back and still not able to understand the problem with the video driver.

  Laptop model - http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15-3537

  Issue - AMD Radeon HD 8670 M Driver does not not in Windows 7 Enterprise. Error - driver has stopped working.

  Drivers have tried - http://www.dell.com/support/drivers/ag/en/19/driverdetails?driverid=P28NG

  Help, please.

  I called Dell phone Support and they helped me solve the problem.

  Solution: -.

  Step 1 - updated BIOS to latest version

  Step 2 - before you install the AMD driver, install the Intel HD Graphics driver 4400 (most of people think that is not necessary because we have a dedicated external AMD card. "It was my mistake too). You can download it from Dell support.

  Step 3 - install AMD Radeon HD M 8670 driver

  And yeppy it works! Windows experience index has a flexible 6.5 for the games graphics on Win 7

• p5u69ut: Serial Port PCI drivers

  Where can I find the drivers for the PCI Serial Port on this machine?  I loaded all the HP drivers for this macine after an upgrade to windows 7 Enterprise and this driver is not available.  Thank you

  Hello:

  You need this driver... install it manually if automatic installation method does not work.

  This package provides the driver Intel Management Engine components to support desktop models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75384.exe

• Satellite Pro A110 PSAB1C: can't choose certain resolution external display

  I have Pro A110 PSAB1C-GM60XE with Intel Graphics Media Accelerator (Controller graphic memory integrated Intel 945GM Chipset) running Windows 7 Enterprise.
  Graphics driver is up to date.

  We got 20 "external monitor wide screen HD.
  When it is used as external screen it allows only up to 1280 x 1024. The display is nice streched out.

  I tried the monitor of one laptop another the same graphics card (integrated memory graphics controller Intel 945GM Chipset), also Windows 7 Enterprise.
  The same version of the graphics driver. This laptop has resolution up to 1600 x 900.

  Any ideas on what needs to be done on A110 Pro to support the resolution 1600 x 900 for the external monitor?

  Note: I've tried DTD Calculator but still the same http://software.intel.com/en-us/forums/showthread.php?t=56423.

  Hello

  Available external display resolution depends on the graphics chip and the driver graphics card.
  If the graphics chip or the graphics driver doesn t card supports the preferred external resolution, you will not be able to choose.

  It seems that the graphics chip will support this resolution.
  In such cases, it s a driver problem.

  Therefore, it would be advisable to download and install the driver from the Intel page.
  I had the similar problem in the past. The driver of Toshiba page didn t supports my favorite external resolution. I got the driver from Intel page and was able to chose him.

• WIN8.1 64-bit driver for my laptop

  Hello

  I want Windows 8.1 Enterprise 64-bit driver for HP Pavilion dv6-6c50se

  please hurry

  Sorry my bad English

  If not replay and give me any driver, I'm not suggestion bar to buy HP...

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Sorry, but the HP Pavilion dv6-6c50se is a consumer computer that originally shipped with the installation of Windows 7. NO driver Windows 8.1 will be made available by HP for this model.  In addition, you should have bought a HP class computer business if you want support for an operating system of "enterprise".

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Elitebook 8460p: problem with drivers

  Hello again,

  Thank you for the quick support here

  Here, I have problems with the drivers on my HP Elitebook 8460p running Windows7 ultimate 64-bit, whenever I have dwonload drivers on hp support for 64-bit Windows business Web site and install them.

  they run but the desktop screen breaks down and brown colours cover... What can I do?

  Hello

  In fact, there is one specific to Windows 7 Enterprise, the same driver supports 7 Home Basic, Premium, Pro, etc.

  Is a specific device that gives the problem? for example a connection Wi - Fi, video, Audio...

• WMI MSSQL missing classes in Windows 2003

  Hello

  I am facing a problem in the follow-up of MSSQL 2008 server that is installed in Windows server 2003 64 - bit Enterprise.

  I need to monitor the MSSQL Server through WMI classes. But I found that WMI classes are missing, when I checked in by wbemtest enum classes.

  Kindly help with this problem.

  Here's the WMI classes that I needed in the follow-up to MSSQL

  1. Win32_PerfRawData_MSSQLSERVER_SQLServerBufferManager
  2. Win32_PerfRawData_MSSQLSERVER_SQLServerGeneralStatistics
  3. Win32_PerfRawData_MSSQLSERVER_SQLServerMemoryManager
  4. Win32_PerfRawData_MSSQLSERVER_SQLServerDatabases
  5. Win32_PerfRawData_MSSQLSERVER_SQLServerSQLStatistics
  6. Win32_PerfFormattedData_MSSQLSERVER_SQLServerBufferManager
  7. Win32_PerfFormattedData_MSSQLSERVER_SQLServerCacheManager
  8. Win32_PerfFormattedData_MSSQLSERVER_SQLServerDatabases
  9. Win32_PerfFormattedData_MSSQLSERVER_SQLServerMemoryManager
  10. Win32_PerfFormattedData_MSSQLSERVER_SQLServerBackupDevice

  If anyone knows the solution, well want to suggest me how to recover missing WMI MSSQL-associated classes.

  Hi all

  I found the solution from another blog... We need run/f wmiadap from the prompt command... so all of the missing classes appeared in the WMI classes...

• Fujitsu fi-7160 paperstream IP - freezes when parsing

  Does anyone know of any problems with the new scanner Fujitsu fi-7160. We have recently updated for this scanner and I noticed that it is now using an IP Twain driver VS. the standard Twain driver paperstream. Every now and then the Remote Scan app will freeze during the scan in the pages.

  Version 9,730 RemoteScan ASP and 10.630 RemoteScan Enterprise Version has been published to address the problems with this new model of Fujitsu scanner to scan. Please make sure that you have updated in this new version.

• Problem stopping and restarting the computer

  Hello

  I searched for so long for a solution, until I decided to post a question here.

  Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

  Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

  It's extremely frustrating because I have two options:

  Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

  or

  Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

  Here is my contact information for the computer and all the...

  Lenovo G400

  (Standard plug)
  500 GB WD hard drive

  Windows 7 ENTERPRISE

  If you need more details let me know, so I can help you.

  Hope to hear something soon!

  MBT

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  Please use the restart configuration.  This will reboot your computer 3 times then save your work

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C).

  I work as a tech TI and at present, we use laptops Lenovo x 230, I have install Windows 7 Enterprise N and then General programs such as internet browsers, some software to sync files, a bunch of business called Visual files, and other small pieces such as Adobe Reader, etc.

  I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C). What happens on several machines and renders useless about 10 laptops for us because we use images of machine.

  I tried to use known last good config, I searched the corrupt drivers suggested in other posts, but they are not present, the center of the action cannot stop and I couldn't debug tool to work. Antivirus software can not also be that no problem because it is installed as part of the standard image.

  Forgive me if I posted this to the wrong topic area and any ideas would be greatly appreciated as this has been a matter of concern to me for almost 6 months now.

  Original title: Blue Screen Windows 7 Enterprise N

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive

  
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

  System specs are extremely useful then please include everything you know.

  The Zigzag3143.com team 

• Precision T3500 recognizes the new HARD drive

  I have a new 4 TB Seagate hard drive that I'm tempted to install than the third HDD on my Dell Precision T3500 system. The BIOS detects the drive fine, but nothing in the operating system (Windows 7 64-bit) find it - no disk, Device Manager or Seagate diagnostic tools management.

  Seagate support said the only thing that might be, is that my fast storage Chipset driver needs to be updated. It's a little out of my depth. I tried searching for a driver updated via the Device Manager, but it says my driver is up to date, but that date is 2010. I downloaded these files:

  INTEL_RAPID-STORAGE-TECHNOLO_A07_R291721. EXE

  SATA_DRVR_WIN_R264763. EXE

  on the site of driver from Dell, but I'm not clear what to do with them.

  SATA Operation should be AHCI and INTEL RST must be 10.1 or higher.  OS must be the 64-bit version, you also need a series of Host Bus Adapter as the Rocket 600.  That's what western Digital uses to resolve these problems.  ACHI HBA is necessary.  The rocket 620 HBA is a solution.

  http://www.Amazon.com/HIGHPOINT-technologies-rocket-620-ROCKET620/DP/B003FFZD0O

  cs_setInnerHtml ('video_51111d5d-89da-4447-bb87-ba7a5b67b199', ");

  Intel RST replaces Intel Matrix Storage Manager.  HOWEVER you cannot update to your hearts content of 7-8-9-10 11-12 or 13 etc.  As newer chipsets and drivers get the older ICH5 6 7 8 9 etc. are removed from support.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014 maybe the max for your motherboard

  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5/3400 SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  The lowest that supports over 2 TB is the RST Version 10.1.0.1008

  Downloadcenter.Intel.com/.../20768

  In general INTEL RST Version 10,11,12,13 ICH8

  IMSM = earlier Version of the driver.

  IMSM is NOT EQUAL to INTEL RST

  Intel® Rapid Storage Technology (Intel® RST) version 9.6 and new records sector supports 4 k if the device supports the emulation of 512 bytes (512th). Intel® RST does not support size of 4 k of the native devices.

  What happens if I try to use an older version of the driver?

  If you try to install the operating system on a disk 512th with an older Intel® RST 9.6 version driver, the installation process could not complete.  This driver is not validated with your XPS and may not work at all. There is ZERO support for it if its does not work.  The INSTALLATION of THIS DRIVER if its does not work can lead to the loss of 100 percent of all data.  Do so at your own RISK.  Installing a version higher than taken chipset support does the same thing.  All data lost RAID restart from zero.

  https://Downloadcenter.Intel.com/download/15251/RAID-Intel-rapid-storage-technology-driver-for-Intel-Desktop-Boards

  If the operating system is installed, do not upgrade to Intel® RST 9.6 version without having to reinstall your operating system.

  As the versions date back earlier support ICH Goes Down aka unsupported.

  You can't have the following

  • Intel® PCHM SATA RAID/AHCI Controller Hub
  • Intel® PCH SATA RAID/AHCI Controller Hub
  • Intel® ICH10R / o controller hub DO SATA RAID/AHCI
  • Hub of Intel® ICH10D SATA AHCI controller
  • Intel® ICH9M-E SATA AHCI/RAID controller hub
  • Intel® ICH9M AHCI Controller Hub
  • Central Intel® 82801IR/IO controller (ICH9R / DO)-RAID and AHCI

  	Title	Date	Version (status)	Type
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installs version 13.6.0.1002 of the RAID Intel® Rapid Storage Technology (Intel® RST) driver. OS: Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *, Windows Server 2012 R2 *,... .more	10/12/2014	13.6.0.1002 (Latest version)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 12.8.0.1016 driver). OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows 8.1*, Windows Server 2012 *.	08/08/2013	12.8.0.1016 (Previously released)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 12.9.0.1001 driver). OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *,... .more	12/12/2013	12.9.0.1001 (Previously released)	Drivers
  	Intel® Rapid Storage Technology (Intel® RST) RAID driver Installed the RAID Intel® Rapid Storage Technology (version 13.1.0.1058 driver). OS: Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *, Windows Server 2012 R2 *,... .more	27/05/2014	13.1.0.1058

  
  (Previously released)Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installs version 13.2.4.1000 of the RAID Intel® Rapid Storage Technology (Intel® RST) driver.
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, 8.1* Windows, Windows Server 2008 R2 *,... .more
  01/08/2014 13.2.4.1000
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 12.5.0.1066 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  22/03/2013 12.5.0.1066
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 12.0.0.1083 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  01/02/2013 12.0.0.1083
  (Previously released) Drivers

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Installed the RAID Intel® Rapid Storage Technology (version 11.7.0.1013 driver).
  OS: Windows Server 2008 *, Windows 7 *, Windows 8 *, Windows Server 2008 R2 *.
  03/12/2012 11.7.0.1013
  (Previously released) Drivers

  Intel® Matrix Storage Manager

  Support for SATA RAID 5/10 on specific desktop platforms, SATA RAID 0/1, AHCI, and matrix RAID on desktop platforms and mobile specific
  OS: Windows Server 2003 *, Windows Server 2003 Enterprise x 64 Edition *, Windows Server 2003 Standard edition *, Windows Server 2003 Standard x 64 Edition *, Windows Server 2008 *,... .more
  17/07/2009 8.9.0.1023
  (Previously released)

  Features supported

  ICH7M

  ICH7R ICH7DH

  ICH7MDH

  631xESB

  
  632xESB ICH8R
  ICH8DH
  ICH8DO ICH8M ICH8M-E ICH9R
  ICH9DO ICH9M-E
  PCH - M ICH10D ICH10DO PCH Support for volume 2-256 to (data only volumes) NO. NO. NO. NO. NO. NO. NO. YES NO. NO. YES YES Expansion of capacity NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. YES YES Load under Windows 7 TRIM * (mode AHCI and RAID for disks is not part of a RAID volume) YES YES YES YES YES YES YES YES YES YES

  64 bit OS is required for readers more 2 TB

  INTEL RST over the 10.1 version is required for larger than 2 TB drives

  http://knowledge.Seagate.com/articles/en_US/FAQ/218615en

  Like other types of software, the Intel RST drivers are updated to keep pace with new technologies. Intel drivers, found in versions of the retail of Windows 7 have a limit of 2.2 TB. Rather than cutting capacity to 2.2 TB, the limitation is expressed like the rest above 2.2 to. In other words, the driver causes the windows operating to see a 3 TB drive 746.52 GiB (or 800 GB).

  With OS two 32-bit, the start address of length and partition partition are stored as 32-bit quantities.
  Because the block size is 512 bytes, this means that neither the maximum size of a partition
  Neither the maximum start address (both in bytes) can be greater than 2 ^ 32 × 512 bytes, or 2 TiB

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  The GUID (GPT) Partition Table has been introduced under the initiative of the Unified Extensible Firmware Interface (UEFI). The maximum size of the partition (disc) is a function of the operating system version. The original version of Windows Server 2003 and Windows XP have a limit of 2 TB per physical disk, including all partitions. For Windows Server 2003 SP1, Windows XP x 64 edition and later versions, the maximum raw score of 18 exabytes may be supported. (Windows file systems are currently limited to 256 terabytes each.)

  

  https://Downloadcenter.Intel.com/download/17131

  8.6.0.1007

  Downloadcenter.Intel.com/.../17882
  8.9.0.1023

  Intel® Matrix Storage Manager Driver
  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / PCH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/PCHM SATA RAID.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014

  Intel® Rapid Storage Technology driver
  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5 Series/3400 Series SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  Downloadcenter.Intel.com/.../20104
  Version 10.1.0.1008

  . DeviceDesc PCI VEN_8086 & DEV_2682 & CC_0104 = 'Intel(r) ESB2 SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/Search
  10.5.0.1027

  Downloadcenter.Intel.com/.../20768

  Version 10.8.0.1003

  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID Controller".
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/.../21854

  Version 11.2.0.1006
  . DeviceDesc PCI VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_27C6 & CC_0104 = "Intel(r) ICH7MDH SATA RAID"
  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller '.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = 'Mobile Intel (r) Express Chipset SATA RAID Controller'

  Downloadcenter.Intel.com/.../21858

  Version 11.6.0.1030
  Windows 7 (32 bit), Windows 7 (64-bit), 32-bit Windows 8, Windows 8, 64-bit

  . DeviceDesc PCI VEN_8086 & DEV_2822 & CC_0104 = "Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID.
  . DeviceDesc PCI VEN_8086 & DEV_282A & CC_0104 = "Mobile Intel Express Chipset SATA RAID.

• I need to put a custom in widows folder background 7 (was possible in XP)

  I use to have a Server Windows 2003 and XP clients, and it was good.

  I have the current setup, I use the server 2008R2 and Win7 enterprise.

  I need to find a way to put a visible brand in specific folders that are changed on request.

  It has been relatively easy in XP mode :) with a background of record.

  However, I do not find this option for Windows 7.

  Did you ever meet such a problem and can offer you a working solution

  Thanks in advance for your support

  Hello

  Thanks for posting the question on Microsoft Community.

  According to the description, it looks like you want to use a custom folder Windows Server 2008R2.

  As this problem is better suited in this Technet forum, I suggest you to save the query in the server instances.

  http://social.technet.Microsoft.com/forums/en/winservergen/threads

  Using the windows-related issues feel free to post on Microsoft Community.