HP color laserjet cm2320 does not receive faxes

Similar Questions

• Color Laserjet 3500 does not illuminate

  Hello, I have a HP Color Laserjet 3500, that does not illuminate. I replaced the power supply and the DC controller, but still nothing. When I hit the power button blinks the led on the Board of trainer, but that's all. The fan does not illuminate. Any suggestions?

  Hi oodletoodle,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps!

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• Color LaserJet 2605 does not print

  My ColorLaserJet 2605 was printing very well - I finished work, then fed the following work and therefore, everything he says "print document" with the green light flashing - but nothing ever prints! I rebooted, reinstalled, nothing changes - it lights, initializes, said it's "Ready", and then when I try to print a 1 page, simple text without color or photos document, I get the same situation of non-printing - saying the document print, but nothing prints ever. Any suggestions? Thanks in advance! Aggie 55

  First, go to the reports menu on the printer and see if you can print a configuration page. If it works, check your driver. If this does not work, then you can be problems to trainer.

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• Color LaserJet 200 cf147a: Color LaserJet 200 does not allow me to remove the tray paper

  The screen on the printer says "loading paper".

  However, I can not remove or open the tray paper.

  Hi @printerdope,

  Thanks for letting me know that you have always problems with the status bar. The plateau is probably out of the track. You may be able to reverse the printer in order to get a better look, to see what is happening with the status bar.

  If the printer is under warranty, call to inquire about a replacement and if the printer is out of warranty, you can still have fix the printer.

  Thank you.

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• Contact does not receive messages

  Hello, I need emergency aid, like one of my Skype contacts does not receive any of my messages, but I can receive all their I tried to register another account, but it still does not work, I have no idea why

  Update: managed to fix Skype messages obtained through after about 500 of them sent

• Receiving UDP does not receive messages

  Hello. I have problem with UDP receiver.

  I can receive messages from the same port you write.

  Stream: open vi--> vi--> read vi UDP UDP writing.  Transmitter and receiver usinf th test port.

  When I try to use vi UDP listen port to just read, I get all the data.

  Program flow. I use vi to send the command on the serial port to MCU. Answer MCU return by sending data to the network port using UDP.

  I start vi to listen to a port UDP (see attached), then I sent the order to MCU. I can see the response on Wireshark, but UDP vi does not receive anything.

  I checked the IP address. Lokks all the same. IP address of the PC and decice is the same as when I write and read at the same time. Any other port.

  Any help please.

  Is the port that you want to use to open? For safety that many IT services will be blocked in ports that don't think they are necessary, or don't want to use.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• LaserJet CM2320 will not complete install on Windows 7

  Printer laserjet cm2320 will not complete installation, when I use the original product CD.  There are several different downloads for Windows 7 (64 bit) on the HP site for the laserjet cm2320 multi function printer, then where exactly should I use (and which are the most up-to-date)?  I've seen several posts of 2009-2010 on install problems with Windows 7 - with none of the real solutions to the cm2320 - and I was wondering if there was a fix yet.  The printer (2320) appear on my PC (which ran on Vista before my recent visit to Windows 7) and will print with USB cable connected to the printer, but the ends of the installation on the original CD before the wireless configuration, etc. can take place.

  DBaum

  Follow the link I post below, select the operating system that you use and that you choose the correct download. I would like to know if it works!

  http://goo.GL/4z2WS

• MS Fax does not store faxes

  MS Fax does not store faxes on folder shared network... all permissions are given on win xp sp3 connected for win 2003 server... I gave the user full Permision and he can create files on the folder of sparkle. all that I need to store a copy of fax on mapped drive I activated this option... it does not work.

  Thoughts?

  Hi BrianK,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fatal error HP Color LaserJet CM2320 MFP 1406

  Please help I got this error during installation of HP Color LaserJet CM2320 MFP

  

  This error is due to Virus attack and was resolved by installing free s Malwarebyte

• LaserJet 4650 does not recognize the NEW fusion of image kit

  After replacing the old kit, the menu of the printer (LaserJet 4650dn) does not disply "New fusion Kit", as it must according to the manual, but still asks me to replace the kit (1700 pages of 'go'). What can I do?

  It does not display this message. Must go to configure the device and then scroll up to reset or reset supplies and one of the options is the new fusion kit. Choose and press select and it will reset. Simply launch a menu card in the information menu to find the exact location.

• Color laserjet 1600: color laserjet 1600 Toolbox not install on win 7

  Color laserjet 1600 Toolbox not install on win 7

  Have uninstalled and rebooted and installed the complete 'solution' software & restarted and it isn't there...

  Cartridge issues are normally resolved by changing the cartridge.  It is usually not much anyone can do to fix one defective, other than frequent cleaning, cartridge until ink is exhausted.  It is often a lot of annoying for most people to bear.

  If you have isolated him down to a problem with the drum or cartridge that my suggestion is to replace it with another cartridge first and consider other options for cleaning and maintenance after.  If the Exchange with a new cartridge solved the problem, you can pursue the options of guarantee/return/refund from the supplier you bought the cartridge under whatever policy they have for defective cartridges.