Configuration ethernet problems

Similar Questions

• Wireless network connection is not a valid IP configuration / wifi problems

  I recently bought a laptop Asus G74 from Best Buy. It is currently running Windows 7 x 64 home premium. I am away from home on a job to work on a project for my company and during the two weeks have stayed at the same hotel with the same wireless, leaving home for thanksgiving between stays. The first week I spent the unsecured WiFi, download programs and games and play. I left the House, returned and used the wifi day, realized there is an ethernet cable in my computer bag laptop and connected to the hard line for the next day. I went to a colleague of room (a room down), went to look for the WiFi, and the trouble started.

  Diagnostics Windows network tells me that the wireless network connection is a valid IP configuration. I thought it would be something to do with the drivers, so I opened by Device Manager, went through each of my NICs 5 or more and look for the updates of drivers. A couple said they have successfully installed, but nothing has changed my ability to connect. Then I thought about rolling back the drivers, but since I've had the laptop for such a short time (less than 30 days) the option is grayed out. It wouldn't make sense since I could connect the previous week on the same wireless.

  From there, I decided to try a system restore to a point when I was getting into at first hotel. Restarting the laptop and the restore was successful. I tried to log in again and the same problem arises. I downloaded a couple of my favorite, Malwarebytes, and SUPERantispyware tools. Both have nothing.

  So I did some research and digging and scholar on ipconfig (flushdns / release / renew) with an elevated command prompt. I tried these and they told me my media is "disconnected" and cannot be released or renewed. I found this strange since I can see the wifi network. I tried to use the Fn + F2 to toggle the wifi and WIMAX (no idea which is incidentally) with simple ipconfig and media disconnected status does not change. I also read that disabling ipv6 might help, so I did this and still no dice. I restored system again for the 2nd point earlier and it still does not connect.

  Drop-down wifi icon in the bottom right of the screen, after trying to connect to the network unsecured wifi here (BWCamarilloInn), it reads 'Unidentified network' and under it "no internet access. I had different flavors of this message, including "limited access".

  I thought I'd try a cross-check to see if it was not on the end of the hotel. I pulled out my laptop backup enterprise and was able to immediately connect to the wifi, and my colleague from work related to his phone and his netbook. I saw another thread somewhere on a Windows forum that suggests a clean boot. Tried, has not changed anything either.

  Currently I have about 5 different adapters according to the Windows Network Diagnostics: the 1/2 LAN connection and Wireless Network Connection 1/2/3.
  I also have 5 in the drop-down list of the network adapters in the Device Manager.

  Intel Centrino WiMAX 6150
  Intel Centrino Wireless-N 6150
  Microsoft Virtual WiFi Miniport adapt
  Microsoft Virtual WiFi Miniport adapt #2
  Realtek PCIe GBE Family Controller

  and a separate drop-down list called adapters Intel Centrino WiMAX, with a menu drop down called function Intel® Centrino WiMAX 6150 driver.
  They are all updated when right click and check for driver updates.

  I also looked through the different adapters and checked to see if the ipv4 settings have been defined to automatically detect the IP of/etc.

  The laptop is great and I wouldn't really have to take it back to Best Buy. Other problems seem to be of culture that may be useful to know. Patch of League of Legends sometimes throws me an error "kernel patch pvp.net has stopped working", or just sits on the main projection before it hits the pitcher. Sometimes, it goes past the pitcher and he's here without connect to or start the main game. I heard that this has to do with the network stuff. I am computer literate, but I'm not terrible with networking or internet configuration stuff. If anyone can give me a hand, that would be much appreciated. I'll help you as much as I can. I've also attached the current ipconfig info (I'm connected to the internet via an ethernet to the wall cable, League of legends should therefore be able to launch).

  Thanks in advance.

  -Chris

  ipconfig Info

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>ipconfig

  Windows IP configuration

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : nomadix.com
  Link-local IPv6 Address...: fe80::d572:64 c 9: d97c:1f0a % 11
  IPv4 address...: 10.0.0.45
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.4.

  Tunnel adapter ISATAP.Nomadix.com:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : nomadix.com

  Tunnel adapter isatap. {0B9C8743-1CDE-4BFF-9FDD-153D2D44F596}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {FD7B8B70-2937-4816-B45C-B73104366373}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e76:423:3796:f5ff:ffd2
  Link-local IPv6 Address...: fe80::423:3796:f5ff:ffd2 17%
  ... Default gateway. : ::

  Tunnel adapter isatap. {33A5C370-7EBC-4E95-A9AD-C7F3BF5D373E}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {501554B1-09E9-49B0-9078-04D0ADBD48A1}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  C:\Windows\System32 >

  Edit
  minor changes to the grammar/punctuation

  Hey, sorry for the slow response. Just got home a few days, and since then, I've been able to connect both the wifi just next door (I'm on the end furthest from the beach with her, but I can still connect) and on my netgear n wireless router. I can also access the router dashboard. Fail to starbucks so just wifi next door was the next best thing. ASUS finally answered after 11 days, saying I should reinstall the wireless driver, which I told them was one of the first things I did. Well. It seems that the hotel wifi and I have no idea why this is the case. I was able to connect to the wifi at the hotel the first week and not the second while they might have changed something. I have no idea. I'm just glad that it connects to other networks, both guaranteed and no guaranteed. I'm just a bit worried that it might happen again in the future but I always wear a hard line in the event of an emergency and a business laptop backup.

  With this new information, should I worry still try to fix anything with the hotel wifi, or do I just leave it as is? Thanks for the support continuous, 100 times better than ASUS right now: P

  -Chris

• Satellite M-115 S1061 not correctly configured Ethernet controller

  Hi all. I am the third person who is the owner of this laptop and I don't have any of the original documents, software - nothing. I recently had to reinstall the operating system, and because I didn't have the original operating system I had to use another copy of Windows XP pro that I had. Well, the network card is installed fine and work correctly, but the ethernet controller isn't. I don't know much about these things, but I thought that if it was not working right the other should be too. They use different drivers? I tried the file here:

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/lan_driver_realtek_25058B.exe

  and I tried the latest file from the realtek site, for my Realtek RTL8139 Family Fast Ethernet NIC.

  No one who has solved the problem. The Ethernet controller is still there in DM with an exclamation mark next to it - as well as the SM Bus controller. The bus controller would be the reason why the controller sets not right?

  What Miss me? Any help will be greatly appreciated.

  I agree with Akuma. Please note that the Chipset driver must be installed first.
  After installation of the chipset driver continue with graphics, sound, modem, LAN and all the other drivers.

  But chipset driver must be installed first.

• Satellite M105-S3004 ethernet problem

  I have Toshiba M105-S3004 problem ethernet adapter. Now my laptop using Windows XP Media Center 2005 OS bundle.

  I want to install new windows, my ethernet card is good & no problem with network connected.
  After a few times OS reboot & disconnecten cable network, the ethernet card is missing, not found on Device Manager...
  If Disable LAN setting BIOS and OS, active new setting of LAN and login again on OS, ethernet adapter found & good job on network... but after a few times and logon after reboot turn off & on again once the ethernet card is missing again...

  I have to change my OS from Windows XP Home Edition, MCE 2005 and WinXP Pro, but still experience this problem.

  I should upgrade the BIOS?
  Can someone help me?

  HM, tried with a live distribution of linux like Ubuntu? I highly recommend that you try it and if the network card is removed when using Linux then it s certainly a hardware related problem. But before you try linux, you need to update your BIOS and everything by default.

  Welcome them

• Ethernet problem on wake since 10.11.2

  Since I installed the latest (10.11.2) El Capitan refreshes, if my end 2013 27 "iMac wakes up, intermittently, the network does not work (browser cannot load a URL, Mail does not work, etc.).  It is not just DNS as incoming IP addresses does not work either.  The machine is connected by Ethernet, no wifi, and the wifi is turned off.  The machine has a fixed IP address on my home network and don't use DHCP.

  When the failure occurs, if I disconnect the Ethernet cable from the back of the Mac and reinsert immediately, networking features are restored. This machine has worked perfectly in this mode because I bought it in March of 2014; It is the first time I've seen this kind of problems when he wake up.  I usually put to sleep using Cmd + Option + Eject or leave it to sleep alone. Intermittent failure in the morning seems to be independent of the way in which he fell asleep.

  Anyone has any ideas I could try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Ethernet problem

  I have a hp pavilion all-in-one pc bought in dec.2012 works fine until Tuesday. 4/23 when I turn it on I get a yellow triangle saying I do not have internet connection but my modem all lights are green and when I go through the connection to fix it tells me that my ethernet ip address is not valid, talk to my internet provider and they said he had to with the ehternet software can anyone help

  Hello

  If you do not see the card Realtek ethernet in Manager devices under network adapters, or any abnormal indication of an ethernet driver issue then the operating system is not presented with a discovery of material for the on-board ethernet card.  Windows 8 still detects hardware additions and changes at boot time.

  Turn on the PC and tap the ESCAPE key to get the Setup Menu. Then select the configuration of the computer (F10) and then look under the headings of security - security of the device and make sure that the network adapter is not marked as hidden.  It must be marked device available.

  If you do not get satisfaction from the above suggestion then start in the configuration Menu and run a set of hardware diagnostics (F2).

  Your PC is still under warranty so if the issue is not resolved then contact HP support.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  --------------------------------------------------------

  You might consider to reset the bios by removing the CMOS battery for 30 seconds.

  1. Unplug the PC.
  2. Remove the back.
  3. Remove the shield EMI on the memory modules (ventilated shield)
  4. Pull the flat disc (drums) and wait 30 seconds and reinsert the battery (note the position of return).
  5. When you turn on your PC, enter bios (computer configuration) and set the clock of the computer.

• Configuration WRT54G problems

  I put my WRT54G Router returned to service after two years somewhere else. Configuration went well up to a point, but I'm unable to change the settings (at least) two areas of wireless configuration.

  First of all, the router is now set to WPA Personal and I want to change my personal WPA2. In the basic/WIreless wireless settings page, I choose WPA2 from the drop-down list box, but he immediately returned to WPA. Second, I want to restrict the use of a specific set of MAC addresses. Wire/Wireless MAC Filter, I can click on the 'Enable' radio button, but it jumps to "turn off" immediately.  Powering everything down, leaving everything and restarting has no effect.

  The bottom of the router is marked WRT54G V8 and the status page displays FIrmware Version: v8.00.0, January 16, 2007. I thought that a firmware update might be in order. Downloads WRT54G (http://www.linksys.com/us/support-article?articleNum=148648) shows version numbers upward through 8.2, but nothing in 5.0 and above says, "No download of the firmware/driver available." Version 4.0 offers v4.21.5 (24/02/2012). What is the current version of the firmware? Seems a lot lower than 8.00.0.

  Firmware upgrade or not, I want to be able to change the wifi settings.

  Options?  Thank you.

  I use a wired to the router, even if it goes through another router first as an additional firewall. I did the hard reset twice with no improvement in the situation.

  Then I discovered the problem: for some bizarre reason, Linksys requires cookies to make changes on the mode of security and MAC, filtering of the screens. I use a strict cookie Manager in Firefox, and once I have authorized temporarily cookies all went well.

  Sorry for the misdirection.

• Construction 9333 XPS with USB ethernet problem

  Hi all

  I'm having a problem with OSD on the XPS 13 9333. I can perform a PXE device boot and install the OS I applied also all pilots of the driver of the CAB on the DELL (http://en.community...ent/w/wiki/2065) website.

  The problem I have is after the task sequence installs the operating system and drivers it reboot to windows 7, once it restarts the USB ethernet is no longer installed so the task sequence will fail.

  I use a Dell fm76n usb ethernet for network device and I have created a driver package to install the driver supplied with the unit but it will still not set please help

  RESOLVED:

  The issue seems to be related to the driver 'bus PCI. When I removed this form the driver package my OSD task sequence finished without any problem

  Concerning

  Robert

• Sony Ericsson W595 USB Ethernet problem...

  I have a Sony Ericsson W595. There is an option in the phone which allows me to use the PC internet on the phone. However, when I use the USB Ethernet mode, can't do internet on the phone. In Network Center, it says 'Public unidentified network'. Using Network Diagnostics, it tells to restart the phone. Even after reboot, I get no Net. Diagnosis shows that "' ' Sony Ericsson HSPA 3.6Mbps ' is not a valid ip configuration". " PLEASE HELP ME!

  Hi Su Haris,

  The question you posted would be better suited in the Sony Ericsson Support. I would recommend posting your query in the Sony Ericsson Support Forums.

   

  Sony Ericsson Support

  http://www.sonymobile.com/us/support/phones/W595/

  Hope this information helps.

• Access to an external table via the display in the UCM configuration manager problem

  Hi all

  I know that this question is already asked here: to access the external tables in DB / in UCM Applet configuration manager but the conversation has already been archived, and I can't comment there. I'm following approach given by William Phelps in above said archived thread.

  I am able to create dblink with data remote and created the view by using the linked table in my diagram of the Complutense University of Madrid. The problem that I face is that this point of view such as told by William is not visible in the configuration manager. Although I tried to give (create view and create all views) system diagram University Complutense of MADRID user privileges, but I'm not sure that it will also provide access rights. I am using the SQL Developer and working at the University Complutense of MADRID 11 g.

  All comment or suggestion will be a great help.

  Stéphane yapi

  The value of this configuration variable: EBRIncludeViewsInTableList = 1

  https://jonathanhult.com/blog/2013/11/use-database-view-WebCenter-content-schema-view/

  Jonathan

  http://jonathanhult.com

• Detected incorrect configuration error - problem of multicast?

  I saw a mistake 'Has detected a misconfiguration' after scoring in the Web client, select a cluster, the tab manage, settings, Virtual SAN subtab-> general.  He went after activating the traffic on the vmk0 VSAN management interface.  I found that by vSphere 6.0 Documentation Center, 'Network Misconfiguration in a Virtual SAN Cluster status' it was probably due to a bad configuration of the multicast.

  I talked to my network admin, who made sure IGMP Snooping has been disabled, and I turned off VSAN, then again once and the error disappeared temporarily.  However, when you choose inside on a specific host a cluster, I still see "host cannot communicate with all other nodes in the active SAN virtual cluster.  The "Misconfiguration detected" error is returned.

  1 is a multicast group must be configured to work?  I am referring to vSphere 6.0 Documentation Center, "Modes of filter Multicast", where it is said:

  Filtering basic multicast mode a Standard switch or Distributed Switch vSphere vSphere transmits multicast traffic for virtual machines based on the destination MAC address, of the multicast group. When you join a multicast group, the guest operating system pushes the MAC address of the multicast group down to the network through the switch. The switch saves the mapping between the port and the destination multicast MAC address in a table of local transfer.

  
  

  I guess that does not apply to the VLAN that I've dedicated to VSAN multicast traffic, where IGMP Snooping should be disabled?

  
  

  
  

  2 cannot not set port 4095 to enable all the VLAN resources shared - is it necessary?

  I thought that when you configure the network on the ESXi server, I thought I should specify 4095 to VLANS allow all trunking 802. 1 q VLAN through.

  As:

  -the documentation I found only goes to 4094 and

  -in the ESXi console, I entered 4095 to the VLAN ID (which failed),

  is the VLAN ID of the management network is good?  Or could it be that traffic for that VLAN even get through on the server because of this?

  3 here is what I understand VMware in terms of this error:

  Cluster form--nodes will not be able to communicate - Has detected a misconfiguration

  – Option 1 -Disable IGMP Snooping = > allows to all the through the multicast traffic

  – Option 2 -Configure IGMP Snooping Interrogator = > if there is another multicast traffic and you fear that multicast traffic could flood network

  
  

  
  

  
  

  
  

  
  

  I also had this link to what is required by the side of Cisco, but it does not (gives 404 error).  Can someone give instructions that work?
  

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/SW/nxSos/multicast/configuration/guide/b_multicast/b_multicast_chapter_011.html

  
  

  
  

  
  

  
  

  
  

  4. by comparing the results of two servers, they cannot ping each other (addresses 10.27.98.7 *) on vmk1.  My network engineer said that the switchports are that all configured the same.  Any thoughts on why they can't ping?

  [root@host05:~] esxcli ip interface ipv4 network get

  DNS name IPv4 address IPv4 subnet mask IPv4 address Type DHCP broadcast

  ----  ------------  ---------------  --------------  ------------  --------

  vmk0 10.27.98.199 255.255.255.192 10.27.98.255 fake STATIC

  vmk1 10.27.98.71 255.255.255.192 10.27.98.127 fake STATIC

  vmk2 10.27.98.136 255.255.255.192 10.27.98.191 fake STATIC

  [root@host05:~] vmkping - I vmk1 10.27.98.71

  PING 10.27.98.71 (10.27.98.71): 56 data bytes

  64 bytes from 10.27.98.71: icmp_seq = 0 ttl = 64 time = 0,096 ms

  64 bytes from 10.27.98.71: icmp_seq = 1 ttl = 64 time = 0.084 ms

  -10.27.98.71 - ping statistics

  2 packets transmitted, 2 packets received, 0% packet loss

  round-trip min/avg/max = 0.084/0.090/0.096 ms

  [root@host05:~] vmkping - I vmk1 10.27.98.70

  PING 10.27.98.70 (10.27.98.70): 56 data bytes

  -10.27.98.70 - ping statistics

  3 packets transmitted, 0 packets received, 100% packet loss

  [root@host05:~] vmkping - I vmk1 10.27.98.71

  PING 10.27.98.71 (10.27.98.71): 56 data bytes

  64 bytes from 10.27.98.71: icmp_seq = 0 ttl = 64 time = 0.088 ms

  64 bytes from 10.27.98.71: icmp_seq = 1 ttl = 64 time = 0,074 ms

  64 bytes from 10.27.98.71: icmp_seq = 2 ttl = 64 time = 0,081 ms

  -10.27.98.71 - ping statistics

  3 packets transmitted, 3 packets received, 0% packet loss

  round-trip min/avg/max = 0.074/0.081/0.088 ms

  [root@host04:~] esxcli ip interface ipv4 network get

  DNS name IPv4 address IPv4 subnet mask IPv4 address Type DHCP broadcast

  ----  ------------  ---------------  --------------  ------------  --------

  vmk0 10.27.98.198 255.255.255.192 10.27.98.255 fake STATIC

  vmk1 10.27.98.70 255.255.255.192 10.27.98.127 fake STATIC

  vmk2 10.27.98.135 255.255.255.192 10.27.98.191 fake STATIC

  -10.27.98.70 - ping statistics

  3 packets transmitted, 3 packets received, 0% packet loss

  round-trip min/avg/max = 0.072/0.080/0.089 ms

  [root@host04:~] vmkping - I vmk1 10.27.98.71

  PING 10.27.98.71 (10.27.98.71): 56 data bytes

  64 bytes from 10.27.98.71: icmp_seq = 0 ttl = 64 time = 0,726 ms

  64 bytes from 10.27.98.71: icmp_seq = 1 ttl = 64 time = 0,362 ms

  64 bytes from 10.27.98.71: icmp_seq = 2 ttl = 64 time = 0.561 ms

  -10.27.98.71 - ping statistics

  3 packets transmitted, 3 packets received, 0% packet loss

  round-trip min/avg/max = 0.362/0.550/0.726 ms

  
  

  
  

  
  

  
  

  
  

  PS: this certainly looks like a network configuration problem

• HP dv6-1230US ethernet problem

  So I just upgraded my dv6-1230us for windows 7 and now the Ethernet cable does not work. I tried a lot of ports that works for other devices, including my XBOX. Is there a driver or something I can download to fix this problem? Thank you!

  Hello

  Try the following.

  Unplug the ethernet cable from the laptop.  Return to Device Manager, open the network adapters, right click on the entry for Realtek PCIe GBE Family Controller and select uninstall - you should also receive a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When it finished, restart the computer and let Windows reinstall the hardware.  Leave empty for a few minutes and try the ethernet connection.

  Kind regards

  DP - K

• [EMP Configuration] OracleDB - problem of Configuration of OC4J... not found

  Hello
  
  Constantly reviewing the existing solutions for this issue, I find that mine is not yet displayed.
  
  Intro
  In order to install EPM, I had to install Oracle Database 11 g. After installation, an error has occurred, stating that configurations were not saved and I could manually run "ECMA.bat" later.
  I tried to configure by creating environment variables such as:
  -ORACLE_SID
  -ORACLE_HOSTNAME
  -ORACLE_UNQNAME
  
  So far, I have not tried to run ECMA.bat for the last time, because I'm sure that I will not fail due to not recognize the host name.
  
  
  The question
  Whili trying to make sure that the database is properly set up, I tried to access the Web page, to no avail.
  Then, I found my problem in the forums:
  
  When I type cmd:
  
  -> (Type I)
  C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1 > emctl status dbconsole
  
  -> (returns)
  OC4J Configuration problem. C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1/o
  c4j/J2EE/OC4J_DBConsole_HPCM. Lab.pt_orcl not found.
  
  
  In fact, there is no file with this name, or something like "/ OC4J_DBConsole_localhost_orcl" suggests that many positions.
  I only have folders like:
  -' House '.
  -"oc4j_applications".
  -"OC4J_DBConsole".
  -"OC4J_Workflow_Component_Container".
  -"OC4J_Workflow_Management_Container".
  -"utilities".
  -"deploy_db_wf".
  
  Some posts suggesting to change me my file/driver/etc/host, but I think that my current file is correct:
  
  -> (Contents of host gile)
  127.0.0.1 localhost
  XX.XXX.XXX.XXX HPCM.lab.pt
  
  
  Honestly, I'm out of ideas and I wish all experienced colleague could give me a hint.
  
  
  Thanks in advance

  Hello

  It is useful to have a look at the next on Oracle support document.

  Problem - emctl start dbconsole fails with the problem of the OC4J Configuration OC4J_DBConsole__ not found error * [555218.1 ID] *.
  Linux 64-bit DBConsole fails with "cannot find/oc4j/j2ee/oc4j_DBConsole_... OC4J Configuration problem ' * [462325.1 ID] *.

  Thank you
  HyperEPM

• HP Pavilion g6-2252sa Notebook: Ethernet problem since upgrade to Windows 10

  my machine was functioninig fine until a couple of days... I then updated windows 8.1 to 10

  different sites speed tests confirmed I had 1/10th the speed I pay Virgin Media for.

  I went into Device Manager and it showed that a wireless adapter is 802.11 and me go around 50mbps on speedtest.net

  but the last test of the Ethernet with speedtest.net gave me 9.08mbps

  I hunted for ethernet drivers updated and many forums all to nothing done.

  any help or links received with gratitude.

  TMaxx

  Roll back... And guess what, Ethernet stuck to void 10meg still...

  Thanks in any case. Think I'm going to x cry a little now

• Configuration WRT310N problem

  Just got a new WRT310N (V2) router yesterday and have it configured.  Seems to work fine except for a power cycle required this morning second day, not a good sign, we'll see).

  in any case, the printed manual means power set 20 MHz, 40 MHz, or Auto for wireless "channel width.  What I see is only 2 choices, 20 MHz. and 'Do Auto'... no choice 40 MHz...

  I would like to see a selection of 40 MHz., should I see it?  I tried to only set "N" instead of "mixed" for the choice of the Protocol and still has not seen a single choice of 40 MHz...

  Anyone can check if I should see the 40 MHz setting.?  How about you how could I achieve this?  My router came with the latest firmware, version 12.

  Thank you.

  -Roger

  Good, we call Linksys, technical support.  The person told me that this change is due to a change in the specification n wireless, the router is supposed to now "select the best channel", without any help from the user.

  Interesting, let's see how it works.  If it works with my wireless router (WRT54GS) g the WRT310N cascaded so that I can have a network only (faster) on the WRT310N n and a network on the WRT54GS so g-only, I will be very happy.

  -Roger