Color LaserJet 2605 does not print

Similar Questions

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• Color Laserjet 3600n does ' t print. Message "looking for printer." New ethernet cable - no improvisation

  Color Laserjet 3600 n does not print. "Looking for printer" message in the printer window. Tried the new ethernet cable-no improvement. Printer turned, restarted the computer and enabled printer back - no differrence.

  Internet works fine. Help, please!

  The software update referenced actually comes from Apple.  If it's not showin your software updates Apple, then you can manually download it here:

  http://support.Apple.com/kb/DL907

• Color Laserjet CP1518 will not print in color

  XP SP3 usb connected.

  I found other troubleshooting solutions. Namely, that where the solution is to uncheck "print in grayscale".  I don't see this option on one of the property tabs.

  The 1518 has been in service for months, maybe more than a year.  Had some problems with it not behave like a printer and would remove and reinstall through control-> printers/Fax Panel.

  Tried again with this instance, nothing helps.   Color toner supplies are all over 80% - and print supply page in the menu of the printer _does_ color print.  Fact page of toners 'Colorsphere.

  Any jobs sent to the printer, with elements of color, prints in grayscale.  The printer is shared through the connected usb XP machine.  network printing also does not print in color

  A search of this forum did not turn anything for this situation.  If anyone can provide a link to the query (solved) of another user or perhaps an explanation for changing the appropriate printer property to start printing in color once again I certainly appreciate it.

  Thank you.

  A solution of sorts.  I'll post here so when it happens again in a year and my addled brain can't remember, maybe that I'll find myself here.

  At HP, I downloaded the printer driver.  These are apparently "universal."  Deleted the XP printer and it - he added point to the level of the 8-12 different folder with .inf files that I had just downloaded.  No idea which one to use.  And apparently not so universal that HP would have you believe.  I presume that one I chose (proabably the first alphabetically) only allows gray - or is gray universal for printers.

  Well, rather than waiting on the long tail of wisdom on this forum I tried a reset hot of the printer (pull the plug while its on and wait 15 seconds).

  did.  tried to print (in excel the view print used to always display in color and he wasn't yet). There not also to print in color.  However in the meantime that the print job, I noticed that my "equipment was ready for use.

  Checked the printer and found a new listed HP cp1518ni.  has chosen to print in excel and the preview showed in color and voila! print color too.

  I've never cared for lack of HP of discrimination re: printer drivers 'universal '.  At least, they should give more guidance on which .inf to use _if_, you're going to be looking forward and install it yourself.

  However, I am impressed XP and HP got the correct auto-install.

• LaserJet P1606dn: does not print the background of the page number of manual

  I use the HP Laserjet P1606dn printer.  I am trying to print the user's Guide the HP for a new printer HP Officejet Pro 8620.     The manual is in PDF format.   When you view a page of the manual on the computer screen, the page number appears at the bottom of the screen.  Unfortunately, when printing the printer manual HP Laserjet P1606dn, the page number is not printing.  I tried to use the SHRINK TO FIT to the Laserjet function, but that does not print the page number.

  Any advice on how to print the page number would be welcome.   Aaron

  Thank YOU FOR YOUR QUICK RESPONSE!   PROBLEM HAS BEEN RESOLVED.  I TRIED TO PRINT THE GUIDE THE USER DIRECTLY FROM THE WEB SITE THAT DID PRINT NOT PAGE NUMBER.    I DOWNLOADED THE MANUAL IN THE MEMORY OF THE COMPUTER AND THEN PRINTED THE GUIDE FROM THE DOWNLOADED FILE.   THE PAGE NUMBER DID PRINT WHEN YOU PRINT FROM THE DOWNLOADED FILE.    WHY IT WORKED, I DON'T KNOW, BUT CELA WORKED.

  THANKS AGAIN FOR YOUR KIND INPUT1 BEST, AARON

• HP Laserjet 1200 does not print in Windows 7

  I have a HP Laserjet 1200 connected via the USB port of a laptop running Windows 7, 64-bit.  I installed the driver 64-bit windows 7 to the printer through the Windows Update process.  I added it as a local printer as described in this thread.  The driver installs and seems fine.  (The icon of the printer under "Devices and printers" is another printer, but I don't know which is relevant).  When I try to print a test page or any other page, work flashes in the queue of the printer window and disappears quickly, but the page does not print.  I get no error message.  Any suggestions?

  Hello

  I suggest you go through the following link.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also try downloading the driver from the manufacturer's website, install on your computer.

  You can download the driver from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29790&prodTypeId=18972&prodSeriesId=29789&swLang=8&TaskID=135&swEnvOID=4063

  You can also refer to:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• HP Laserjet CM1415fnw does not print wireless

  Original title: HP Laserjet CM1415fnw

  My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

  Hey Kevin,

  What version of the windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  HP Print and Scan Doctor

  Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

  Printer in Windows problems

  Keep us updated on the status of the issue.

• HP Laserjet 1010 does not print

  After you have reinstalled Windows Vista 32-bit and printer HP Laserjet 1010 and update the printer driver does not work.  There is nothing wrong with the printer (everything is checked with the program Microsoft Fix It).  When I click on and open the printer it shows that there is an error.

  Have you installed the printer according to the instructions from HP, who usually does to install the HP software * before * the printer connection, and you used the latest version of the software / drivers from the HP site, or did you just plug?

  And if you have installed the HP drivers / software there is a HP utility test, theres also the option to print a test page through printer Btns

• HP LaserJet 5550 does not print A3

  I rMBP (Maverics 10.9.5) and network HP LaserJet 5550 (pilot 19.8). After the last Update my priter won't print A3.

  I reinstall the printer drivers. I reconnect my printer, but it does not solve my problem.

  How to set up the paper of trey?

  I solve my problem after update Photoshop

• Color Laserjet 3500 does not illuminate

  Hello, I have a HP Color Laserjet 3500, that does not illuminate. I replaced the power supply and the DC controller, but still nothing. When I hit the power button blinks the led on the Board of trainer, but that's all. The fan does not illuminate. Any suggestions?

  Hi oodletoodle,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps!

• Color Laser CM1015 does not print color

  Hello, I hope you can help.

  I can't print in color with my MacBook Pro on a Color LaserJet CM1015.  The rest of the Office is based on PC and there is no problem, but my documents are produced only in black and white.

  We had a Setup for Windows disk, so I downloaded the software for Mac on the HP site, but it will still come out with no color.

  Any ideas?

  Thank you very much

  Nancy

  If you can mark it as resolved, we would be grateful.

  Thank you.

• HP color laserjet cm2320 does not receive faxes

  We have just this printer, but when we try to send faxes just, it sounds and sounds like a normal phone even if it is properly configured to receive faxes.

  Are asking you why an external device with an integrated (didn't need a computer) fax machine does not work in a Windows Vista forum?

  Contact HP.  The functions Copier and Scanner this device don't even NEED a computer at all - much less _ Windows - to work.  Make sure you only have everything connected correctly.

  I suggest the following documents from HP...

  • http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01458391/c01458391.PDF
  • http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01434826/c01434826.PDF
  • http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01436396/c01436396.PDF

• Given that I've upgraded to Windows 10 my laserjet p2055dn does not print

  I upgraded my 2 computers to 10 Windows over the weekend and since I can't print to one of my printers from my desktop but my laptop is printing OK.  I tried to uninstall and reinstall the printers.  When I install they appear on my network, but when I try to print I get a message that says: it can not print with the current configuration.

  When I try to print a PDF document, I get the error message that "no pages are selected for print.

  Finally, I uninstalled all HP software then reinstalled both of my printers and everything works.