HP compaq dc7700 sff: Audio driver

Similar Questions

• Problems of updating HP dc7700 SFF NIC driver

  Hi all!

  I have a HP dc7700 SFF desktop I have been working to rebuild. I restored it to out of State of the box with the built-in HP restore partition, put the OS Win XP Pro SP2. The Integrated NIC is a processor Intel 82566 DM. The default driver is version 9.4.21.0 (as dated 19/07/2006) and works very well at speeds of 1 GB. The problem is that when I upgrade the driver to version 9.15.17.0 (dated as of 07/03/2012) using the latest ProWin32.exe installer available on the Intel site, the NETWORK adapter will connect is no longer at a speed of 1 Gb and will connect to 100 MB. I know that the machine has network connectivity and seems to be very well until I do the update of the NETWORK adapter driver. Starting after the rendering of the office, State system for the network connection status bar icon indicates that it is connected to 1 GB for a moment, then it shows as disconnected, then reconnected shows, but only 100 MB. I tried to uninstall and reinstall the package of pilot several times with no luck. I also tried the official HP package from the downloads dc7700 (SP51788) page and that brought no result. I can restore the r in car to the 2006 version and the NETWORK card will reconnect at a speed of 1 Gb again.

  I'm thinking / hoping I can't be the only person who is having this same problem? Any help would be tremendously appreciated. If I can provide any additional information, please let me know. Thank you!

  Why not just use the driver of 2006 if it works well? Newer isn't always better, especially when it comes to drivers.

• HP Compaq dc7700 SFF PC can be upgraded to support a 2.66 GHz Intel Core2Duo (E7300) processor?

  My HP Compaq dc7700 desktop PC small form factor is equipped with a processor replacement of Intel Core2Duo 2.66 GHz (E7300), Stepping/CPU ID 10676, but I now have a start-up error message: "1801 - Microcode patch error.»  Missing or not valid processor updated Microcode.  "Please contact Hewlett - Packard Company for a new firmware update to support the new processor Stepping.

  (The computer start in pressing 'F1', but performance deteriorated due to invalid processor Microcode Update).

  I sent to HP, but have yet to receive an answer.   (They may have bigger problems right now!)

  The HP documentation for the dc7700 is ambiguous about whether if an E7300 processor would be sustained.  In this regard, the documentation recommends against editing processors more than 95W, but the E7300 is only a 65W processor (exactly the same as the original processor E6300).

  I've updated the PC system BIOS (786E1, Rev 1.16, the most recent available on the HP relevant support Web page):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en & cc = us & prodNameId = 3232108 &...

  "(mais malheureusement, il semble que Rev 1.16 n'inclut pas une mise à jour de Microcode valide pour le processeur E7300)."

  It seems that I may need to wait and hope that HP will issue a valid and new Update Microcode for the E7300 dc7700 support page.  (With luck, the update of firmware would be included in an update of the BIOS which can be implemented through the windows, not via a legacy floppy!) 

  (I note that Intel provides an easy firmware update, but it is not easy for those who are running a Linux Enterprise operating system.  I am running Windows Vista Business 64-bit).

  This is my first post.  Thanks for all the tips on the problem that I outlined above.

  Thank you Paul and Frank,

  The evidence you presented against compatibility has begun to address substantial.

  Furthermore, it is probably not conclusive in itself, but Intel motherboards with a chipset Q965 (at least the names of the Council containing the string '965') also do not appear to support beyond E6700 processors...

  http://processormatch.Intel.com/COMPDB/SearchResult.aspx?BoardName=DG965SS

  I'd be happy to call my request 'resolved' - has answered in the negative.   Thanks again and well done! to each of you.

  With gratitude,

  Robert...

• Compaq dc7700 sff: motherboards latest include the compaq dc7700 sff case?

  I want to use the case of an old dc7700 sff, but the layout of the Panel back looks like it is the inverse of all the motherboards I've found. Is there any motherboards that support DDR3 RAM and have at least three connectors SATA (SATA 3 preference) that will be adapted to this case (PCI ports on the left instead of right of ports)?

  Hello:

  Unfortunately, there is not.

  The dc7700 was the last model that used the case that has also been used d530, dc7100, dc7600.

  When the dc7800 came out, they used a completely different case, which was also used on the dc7900.

  Then the case was changed again when the 8xxx models Elite have been introduced.

  The first business office of HP in this class that came with sata ports 3 was the 8200 Elite SFF/CMT.

• Compaq laptop v3020: audio driver for compaq v3920 laptop soundcards 8.1

  Windows 8.1 installed everything works wonderfully except his lost. Need driver, where can I get one?

  That's ok.

  Try the audio driver for Vista.  Install manually if auto installation does not work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-49193-1&cc=us&DLC=en&LC=en&OS=2093&productOid=3179586&sw_lang=&product=3180329

• Compaq Presario 2514AT: Audio driver for compaq presario laptop 2514AT

  I need driver audio for computer 2514AT laptop presario. I use Windows XP. Can any body help.

  Thank you.

  Rajas3

  Hello:

  See if this driver works...

  FTP://ftp.HP.com/pub/SoftPaq/sp23001-23500/sp23455.exe

• HP Compaq dc7700 SFF - Ethernet controller not detected

  Hello, I am not very computer savy and I would be grateful for help with the following:

  I've just performed a clean installation of XP Pro but unable to connect to the internet.  In Device Manager, there are a number of device types preceded by a yellow "?" like this:

  ? Audio device on High Definition Adio Bus

  ? Ethernet controller

  ? PCI Simple Communications controller

  ? Video controller (VGA Compatible)

  When I check the properties of '? Ethernet controller"indicates the status of the device,"the drivers for this device are not installed (Code 28)."  However, in the description of the appliance, it is said:

  Type of device: other devices

  Manufacturer: unknown

  Location: Bus PCI 0, device 25, function 0

  I thought that I could download and install the driver for the ethernet controller, but I don't know which because the manufacturer of the device is unknown.

  I don't know if this is the reason why I can not connect, but can someone help out me?

  Thank you!

  OK;

  This is the driver you need for that (Intel).

  The one on the HP website does not always work for a reason any.

  So, I send this link to people that need to the Intel driver and nobody has yet been disappointed.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType = drivers

  You want to download and install the first listed driver (32-bit).

  Paul

• DC7700 sff: HP Compaq dc7700 sff video updated to improve performance.

  
  

  Hello:

  I recommend the graphics card AMD HD 6450 profile low profile low supports.

  It is the optional card in the HP 8200 Elite SFF, which also has a P/S 240W.

• POUVEZ HP COMPAQ DC7700 SFF CPU E6750 UPGRADE

  the site says he may spend up to e6700. so, I just want to know if e6750 can fit in. someone help me please.

  Hello:

  The E6750 will not work because it has a 1333 MHz FSB speed, and the greatest speed FSB that can handle the card mother/chipset in the dc7700 is 1066 MHz.

• DC7700 SFF BIOS support

  My father has just bought a PC HP Compaq DC7700 SFF (Small Form Factor) used and refurbished and we get an error whenever the computer places.  It reads "BIOS ME Extension stopped Module.  I did some research on Google, and it seems that the error indicates that the BIOS and the BIOS Extension ME are out of sync, which means that their versions do not match.  We are a bit surprised, it was not addressed prior to packaging for resale upward, but nevertheless we are here.  The computer came with Windows 7 Home Premum 64 - Bit.  It is the source of the problems.  Everything I read says to use a BACK program called "FlashBin" to Flash the BIOS with the latest version.  Whenever we try to run the program, it errors saying incompatile architecture (he wants to x 86).  We tried other things is manually creating a BOOT partition on a USB Flash drive and try to run the program to start BACK, but it does not, saying no found BOOTMGR or something.  Another option I found is that the BIOS has a setting called something like "Flash BIOS update" and asked where to find the file. CD-ROM or USB.  When we put on the USB flash utility, BIOS indicates the key USB is corrupted or damaged.  This also happens when we just updated BIOS. BIN file on the USB key with nothing else.

  We are really lost here.  As I said, this is a factory refurbished PC and we would really like to get this annoying error message to go outside every time we start.  Can someone help me please?  Thank you!

  Hello:

  You can read some of the posts offered on reset the cmos on your PC.

  Reset the cmos works the same on the dc7700.

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/me-error-on-Compaq-dc5800/TD-p/940477#.UvFtmemPK9I

  If you want to try the update the ME firmware suggestions, you must use the files to download on the dc7700 under section BIOS support page and I wouldn't update the firmware if you have to do in Windows for the same reason that you would not run an update of the BIOS under Windows.

  I hope that the reset cmos will work for you.

  I have never had this problem on any of my dc7xxx as PC, if unfortunately I won't be able to help you with specific measures to be taken regarding the update the firmware.

• HP Compaq dc5800 SFF: HP compaq dc5800 format factor windows 7 audio driver

  I received the message in error message "no output device is installed" on the sound icon in the task bar bar.  I don't understand why the driver of HP web page

  https://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3658095 & swLangOid = 8 & swEnvOid = 4052

  does not have the audio driver for the small frame factor dc5800 HP Compac PC company.  I'm of the view that other owners have had the problem of not being able to find a sound driver for this as well.

  The driver can be found here:

  (HD)-Audio-Driver-v.6.10.7255-Re.-A-for-Windows-7-(32-64-bit)-free https://us.driverscollection.com/_47316373665403689ce86efb0a3/download-HP-Compaq-dc5800-ADI-high-definition-

  I've successfully installed on my PC.

• Audio drivers HP compaq dc7700

  HP compaq dc7700 audio drivers with windows 7 64 bit

  Accept the agreement.  Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• How can I find a graphics driver for my hp compaq dc7100 sff

  My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  Hello:

  Please follow these instructions and see if the video driver installed.

  Your integrated graphics (GMA 900) is not capable of Windows 7.

  I can send you the link for a pilot who has to work a lot better, but you never have Aero.

  Here is the link to the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-47264-1 & mode = 4 & IDX = 0 & prodTypeId = 12454 & prodSeriesId = 3352967

  You need run the package. It will extract the drivers and it will then give you an error operating system not supported.

  Close the error window and then manually install the driver by clicking on the video controller in Device Manager. Click the driver tab click on update driver. Select the "Browse my computer for the software method.

  Navigate to: C:\SWSetup\sp34749, make sure that the include subfolders is selected and the driver should install.

  It should be much better than what you have now.

  Paul

• Impossible to download the Audio driver for HP Compaq nx 7300

  I'm looking to download the latest audio driver for my HP Compaq nx 7300 laptop that is running Windows XP Professional.

  He has five years now, having been bought again in 2007, and I plan to format and reinstall completely the operating system and drivers to rejuvenate the machine that becomes very slow and capricious.

  The file I'm looking for is this:

  Type: - Audio driver
  Version: 5.10.1.5210 (October 11, 2007)
  System: Microsoft Windows 2000, Microsoft Windows XP Home Edition, Microsoft Windows XP Professional
  File name: sp37155.exe (6.9 MB)

  This is the page where I should be able to download:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = UK & prodTypeId = 32...

  But, when I click on the link, I get this message:

  File not found
  Show invisible characters
  550 sp37155.exe: no such file or directory.

  Please can someone give me the link to download this file?

  Thank you

  Armorel

  Hi, Armorel:

  It is a version older that should work.

  When HP corrects its Web site, you can install the last being.

  Paul

• audio driver does not work for my compaq presario r4000 notebook XP system

  Hello

  I reinstall Windows XP on my compaq presario r4000 notebook, and I download
  all drivers of HpCompaq official site. But the audio driver
  does ' t work for my "Conexant AC-Link Audio.
  (PCI\VEN_1002 & DEV_4370 & SUBSYS_3085103C & REV_01\3 & 13C0B0C5 & 0 & A5) ».
  Please help me to understand.

  Thank you!!

  Paul,

  It works! Thank you ~.