HP Compaq Elite 8300 SFF: Block power Hp Compaq Elite 8300 SFF + graphics upgrade

Similar Questions

• 8200 elite SFF Graphics upgrade

  Hello

  Everyone updated the graphic on a HP 8200 SFF? Could someone give me a tip should I get without upgrading PSU?

  Thank you

  Mattias

  Hello:

  The option for this model is the low profile card Radeon HD 6450.

  You can always find them around.

  Just make sure you get one that includes the profile low support in the editing area.

• H8 1414 HP envy. Need more power supply to run a better graphics card

  H8 1414 HP envy. Need more power supply to run a better graphics card. I don't have that power 300 watt need more someone knows a number of room and the place to get one that fits? I know that windows 8 makes it difficult, I am ready to install windows seven anyway.

  Nick, welcome to the forum.

  You can use any standard ATX power supply unit (PSU).  I always recommend measuring the PSU existing and comparing measures to whichever you choose, however.  I love Corsair products.  Also, I recommend at least 500W; 600W is even better for future updates.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• OptiPlex 980 SFF graphics card

  OptiPlex 980 SFF graphic card - what is the best, best, 2nd 3rd best. ???

  There are not that many options.  Low profile (not MUST NOT HAVE ENVELOPPANTE of RADIATOR)

  Radeon 5450 or 6450 unit silent Fanless like the ASUS EAH6450.

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439

• How to find the serial number of 8300 Gs graphics card please help

  I try contact evga tech support but I need the number of graphic series of 8300 Gs registration card of finished products for support technique evga. My pc is a Dell inspiron 530 pc exalted pix to A crash, I'm sure that the screen's video card problem.  I do not turn off the pc and open the computer case and find the 8300 GS graphics still then the Pc card serial number works well. I have Service Tag any good help please

  Do you mean you bought an EVGA 8300 GS on your own or being the 8300 GS installed by Dell?  The serial number will be on the retail box or on a sticker on the map.  You need to open your side panel and look on top of the card to get the serial number if necessary.  If installed by Dell, most likely you don't have any collateral at this stage on the 530.

• HP Compaq Elite 8300 SFF: RAM upgrade

  Hello!

  I tried to replace the 4 GB of RAM, upgrade to 8 GB with a pair of G.Skill. Unfortunately, it didn't turn out as planned, instead, I had a series of beeps and a black screen. RAM details below:

  old RAM: Samsung M378B5273CH0-CK0

  4GB 2Rx8 PC3-12800U-11-10-B0 1.5V

  New RAM: G.SKILL RipJaws X

  F3-12800CL9D-8GBXL

  PC3-12800 4GBx2

  CL9-9-9-24 1.5V

  The Rams are not compatible with the system or are there other factors that could have caused it?

  Claude, welcome to the forum.

  Here's Maintenance and Service Manual for the computer.  On Page 94, you will find the section of memory for the computer.  Please read it carefully.  What I've read, only seems to me that the new memory is compatible with the motherboard.  I think that the timings are incorrect.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Compaq Elite 8300 SFF: processor upgrade

  Hello-

  I was looking for some assistance or suggestions on upgrading my current image to 8 or 16 cores processor.

  Currently installed is an Intel (r) Core i5-3570 CPU @ 3.40 GHz processor. I'm pretty savvy to know how to replace a computer processor, but not savvy enough to know the right type I should use computer.

  I tried to upgrade the processor in the past on a previous machine and ended up losing the machine completely - would not start longer with new or previous processor. IN CASE OF FAILURE.

  Any ideas of a few processors compatible with my camera? Perhaps Intel or AMD.

  Thank you!

  It may be a Core Intel (r) very specific.

  See the following illustrated parts and PDF map of repair for a list of compatible processors. (see page 2)

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=5232852&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03612803%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP compaq 8200 elite SFF graphic settings

  I have HP compaq 8200 elite SFF and only intel dedicated hd graphics 2000 which says that I have only 32 MB of ram, how do I increase it? I tried to get into the BIOS but I can't change it whatever it is, not even overclock my processor, is there a solution?
  
  P.S. I tried the bios update from 2.06 to 2.60 and I don't see any changes.

  Hello

  You can get assistance on the HP Enterprise Business Forum.

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Block POWER &amp; Presario SR2020NX upgrade graphics card

  Hello world!

  My sister in law has a Compaq SR2020NX with one, (I think), 250 watts power supply.  She would spend the onboard graphics chip 6150LE to a dedicated card.  I am sure that she will need a new power supply for it but am not sure that the form factor.

  Can someone tell me if its system will accept a standard ATX PSU?  Or otherwise, that I am limited to?  Require a 24-pin (or 20 + 4) connector on the main Board?

  The PSUS that I'm interested in right now are the Antec earthwatts EA430

  or the Antec earthwatts EA380

  In addition, given that I'm here, can I also ask on the graphics card?  I think something like this model EVGA,

  One last thing, does anyone know if the chip 6150LE will accept the standard Nvidia driver?  If not, is there another source for updates of driver for this chip?

  Any help will be certainly appreciated!

  Thank you

  Larry

  Message edited by jaspertheogre on 12/26/2008 12:24
  Message edited by jaspertheogre on 12/26/2008 12:40

  Any ATX should work.  The 24-pin is designed to adapt the pins 20 connections... the extra pins hang on the side.  I would recommened make the connector 20 + 4 pin... so if you don't need the extra pins you can just stand out them.

• HP 8200 elite CMT: can I use an external power supply for AMD Radeon HD graphics card 7770?

  I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?

  Kindly help me to solve this problem.

  Thank you

  Thank you for the information, @haseebkhan7310.

  I'm not a fan of using a separate power supply to power a video card.  It can cause problems.  However, here is a video that will show you how it can be done:

• Satellite L750 - block power supply

  Is someone can you please advise me what is the auxiliary power supply for this model.
  The battery shows 10.8.

  Car chargers that I have been watching are 18v - 20v 90W or 120W.
  These are suitable car chargers or they will damage the laptop.
  Due to the nature of my business, I need the laptop on charge while I'm driving long distance.

  Thank you

  Hey,.

  Simplest is that check you the spécifciations on the underside of your laptop. Usually, there is a sticker with a denunciation of the intensity and tension.

  The car charger should have the specs of that too.
  For example, if your laptop 19V, you need a charger with 19V too has need. Amps must be identical or greater, that s no problem.
  ?

• Block power &amp; graphics card help upgrade needed (hpe h8-1120)

  1st post, hope I got this thing right (sigh

  Question 1: GRAPHICS CARD MINIMUM 3 MONITORS (I HAVE 4 HP W2207h MONITOR)

  I just love this box, but... I have 4 monitors, what graphics card should I expect (there is that one slot pcie x 16... budget for the new card is in the card current from 150 to 300 dollars is a gt 530, no second slot for another, can I get with a card with 3 port all of my monitors have dvi and hdmi ports) I'm not too interested in so super high-end cards aren't a real problem for me, it's just something that I can get all monitors talking to this game box, intensive stuff more graphic than I do are photoshop cs5, development web and watching movies.

  Question 2: UPGRADE EXISTING PSU 300 to 600 OR MORE.

  Power is currently 300 max, I think that I have to maybe twice by that or more.  I don't know who PU fits and has the appropriate cableing etc. searched but could not find anything by announcing the replacement

  I'll add another disc and player blue ray of Christmas, I hope...

  ANY HELP WOULD BE REALLY APPRECIATED.   HOPING TO HAVE EVERYTHING IN PLACE OF CHRISTMAS.

  ktom,

  An interesting challenge. It took a little searching to meet all your requirements.

  The GT530 compares the HD5570 card.

  The video card, with support for DVI 4:http://www.newegg.com/Product/Product.aspx?Item=N82E16814129172

  specifications of the manufacturer: http://www.visiontek.com/vhdci/hd-5570-4-port-dvi-d.html

  The new power supply: http://www.newegg.com/Product/Product.aspx?Item=N82E16817182199

  I took into account the 2 drives you want to add, and I think that you will be satisfied.

• Block POWER + video card Upgrade - Dell Dimension e521

  I was thinking about upgrading my video card to a BFG 8800 GT OC

  To do this, he said that I need a minimum of a 425W PSU, so I was thinking a CoolerMaster Extreme Power 500w

  But I read everywhere and I saw a few comments from people on how Dell uses not normal size of power supply, I have a problem installing this power supply? In addition, this video card would be great to fit in all this?

  Thanks for your help :)

  Message edited by azuntt on 04/08/2008 21:57
  Message edited by azuntt on 04/08/2008 21:58