Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

Similar Questions

• HP Elite 8100 sff: need support of recovery for HP Desktop

  I friend of mine has a desktop HP Elite 8100 SFF with processor i3 with 4 GB of ram was trying to upgrade to windows 7 pro or business pro (if there is a difference) 10 and all the process erased the hard disk windows and windows 10 has not completed the update/install.  There was a problem, but he's not sure what she was.  This attempt was several weeks ago.  After that it wouldn't boot obviously and beep (red light) 5 times in the models.  I think it is a ram problem.  Upgrading windows 10 will cause the ram to go wrong, because he could not bear?  There is also no recovery media for the operating system.  They always make it for this pc?  Thanks in advance.

  jehrock08

  Hello:

  Windows may not cause the memory to go wrong.

  The first thing to do for this problem would be to remove and reconnect firmly all memory modules.

  If this fails to solve the problem, remove all modules but one and test each one individually in the black slot nearest the processor.  One causing the PC to 5 beeps is bad and must be replaced.

  If this fails to solve the problem, most likely the system board is bad because it is doubtful that all modules of memory could be faulty.

  If you live in the USA/Canada, call HP at this number of order recovery media.  Have the serial number of the PC handy to give to the customer service rep.

  1-800-334-5144

• I need to upgrade the entire operating system, in order to get Safari 8.0?

  Apparently, my Bank now requires Safari 8.0 continue to use their online service.

  10.7.5 running w/safari 6.1.6... can't seem to find an update to version 8.0.

  I need to upgrade the entire operating system, in order to get Safari 8.0?

  How the last OS are there, more on Intel 2.4 GHz Core i5?

  Compatibility problems, that I should be aware, before I update?

  1. Yes, or switch to a product such as Firefox.

  2. it depends on the amount of RAM in the computer. She should have at least 4 GB.

  3. click here and search for your software.

  (138498)

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• My bank site refused my log in because of 'old' browser, but I don't want to upgrade the next operating system (Yosemite) because he ruined my computer before. How can I upgrade only from Safari?

  My bank site refused my log in because of 'old' browser, but I don't want to upgrade the next operating system (Yosemite) because he ruined my computer before. How can I upgrade only from Safari?

  Safari cannot be updated past 6.2.8 on Mountain Lion. If you want to, switch browsers.

  (144681)

• HP Compaq Elite 8300 SFF: RAM upgrade

  Hello!

  I tried to replace the 4 GB of RAM, upgrade to 8 GB with a pair of G.Skill. Unfortunately, it didn't turn out as planned, instead, I had a series of beeps and a black screen. RAM details below:

  old RAM: Samsung M378B5273CH0-CK0

  4GB 2Rx8 PC3-12800U-11-10-B0 1.5V

  New RAM: G.SKILL RipJaws X

  F3-12800CL9D-8GBXL

  PC3-12800 4GBx2

  CL9-9-9-24 1.5V

  The Rams are not compatible with the system or are there other factors that could have caused it?

  Claude, welcome to the forum.

  Here's Maintenance and Service Manual for the computer.  On Page 94, you will find the section of memory for the computer.  Please read it carefully.  What I've read, only seems to me that the new memory is compatible with the motherboard.  I think that the timings are incorrect.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Need help with problems upgrade memory on Pavilion DM4

  I have a Pavilion DM4 1201us with original DDR3 2x2gb memory cards.

  I bought a pair of Corsair DDR3 1333 Mhz 4 GB memory cards.

  I have the latest BIOS (F.27) and I'm running the OEM Windows 7 Home Premium 64 - Bit. SP1.

  The BIOS recognizes the 8 Gb and when I run the BIOS memory test it runs without error.

  When I try to boot Win7, it gets somewhere before the logon screen and makes a BSOD with a message about a new memory being installed.

  I went back the Corsair Memory cards, but you need to know if there is a problem with any upgrade up to 8 GB of memory with my particular setup. HP offers an upgrade to 8 GB with the same spec boards. (I'm beyond the warranty period!)

  Any thoughtts?

  Interesting!

  I can tell you that the model only supports 8 GB memory: http://support.hp.com/us-en/document/c02704310

  Have you tried more than one kit of 8 GB?

  The reason why I ask is with memory DDR sometimes reticular sticks will pass all the tests if the two sticks are installed then a stick could be bad without you knowledge.

  Also you tried a bar of 4 GB and a 2 GB stick to see how it worked?

• Problems upgrade memory ThinkPad Yoga 11th 20 d 9

  I recently bought a 20 d model 9 11th Yoga and so far I'm in love.  However, I wanted to upgrade memory 4 GB to 8 GB.  I bought 8 GB Crucial single DDR3 1600 MT/s (PC3-12800) as all the reviews I read said it was OK to use, however, every time I install the memory, and I try to charge the laptop at the same time it crashes.  I can run windows 10 perfectly without a problem until I have try to load it.  I can load cell ther when the laptop is turned off, but for the life of me I can not do coexist.  The original of the ram, I installed and everything works perfectly.

  Even if I'm in the bios, as soon as I plug the charger that will crash the laptop.  There literally rips on the screen and everything vanished.  As soon as I unplug it, the laptop works perfectly.

  I went back the memory and got a replacement and it does exactly the same thing.  I've updated the BIOS and the firmware for the battery.  I'm out of ideas.  Any help would be appreciated.

  I finally found one that works:

  http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ?ie=UTF8&PSC=1&Re...

  So far no problem, I can plug into a fine, and the system shows 8 GB.

• Problem upgrade memory R61i - PC does not

  Hi all

  today I installed upgrading memory 2 x 1 GB on my R61i (7650-A6G), replacing it with the 2 x 512 MB standard memory.

  When I tried to restart the notebook nothing happened: only 4 "beeps", the screen is dark...

  I had to reinstall the standard memory of 2 x 512 and everything was OK

  How can I do to make this upgrade successfully?

  Thank you very much

  Piero

  Thank you very much! following your suggestion, I discovered that a stick does not work; I'll ask the stick for a new provider.

  Piero

• XP to 7 upgrade when the operating system is on a disk separate from the data in My Documents. Do I still need to transfer data from my disk storage documents?

  So I looked at what it will take to upgrade the system to Windows 7 and it seems that for xp, it's a custom installation.  Since I have my data, music, photos, movies, ect in my documents on a separate disk can I just forget to do the recommended data transfer and do a clean install on the operating system drive?  Of course, I'll have to install programs on it but I'm worried about Windows 7 being able to find the separate disk and re-issue of links so that when I send something to my documents it always goes on this disc.  Worried about problems or suggestions anyone can see that I will meet you.  Thank you

  Hi monty67,

  Yes, you will need to perform a custom installation of Windows 7 on Windows XP, operating system, and also you need to reinstall programs work in Windows 7, some programs may not work in Windows 7 due there compatibility with Windows 7.

  After I installed Windows 7 on the computer, you can use the external hard drive with no problems, some external disk may required additional drivers to be installed under Windows 7.

  See the article below to know the process of custom installation.

  Upgrade Windows XP to Windows 7

  http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-xp-to-windows-7?

• Jumping cursor on computer laptop Vista runnung. Did not have this problem on the previous operating system. You have solved the problem yet?

  Some time (over two years) ago I upgraded my laptop from Microsoft Windows XP edition Center for Windows Vista EDITION Home premium.

  Soon after, I started to have problems with a jumping CURSOR.  The cursor would jump to a different location while typing.

  It is a very dnagerous and troubling problem. I searched the Internet for soutions and applied some of the suggestions without result.

  This problem occurred after installing VISTA; This problem has been not - exist with Windows XP. Therefore, the suspicion is that it is

  a Vista software problem.

  Another problem, I discovered with the VISTA installation, when you type, text Gets highlighted his own (as happens when you want to 'select' text to)

  cut and paste.) This problem has been nonexistent with Windows Xp.

  DOOR computer portable 32-bit operaing, 2 gig ram running system.

  Thank you

  Hello, Jose and Elaine,

  See if this helps:

  HP Support document

  Troubleshooting of mouse - mouse cleaning details

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3432827&prodTypeId=12454&ObjectID=c00006616

  Good luck!

• Make sure you get all your drivers after the upgrade of your operating system

  I've seen a lot of post lately in which users try to upgrade their operating systems (Vista-> Windows 7 or Windows 7-> Windows 8).  Often the hardest part of this upgrade is to make sure that you get all of the available drivers and software in order to use the material.

  You can always download software and drivers for your laptop computer manually by visiting the HP support Web page and search for your laptop in the product number.  This document shows you how to locate the number for your product.
  
  However, the best way to download and install the software for your laptop is to use HP Support Assistant.  This application comes pre-installed on most computers but portable consumer is likely to be absent after a clean install or upgrade the operating system.  It will search all the drivers and other software that can use your laptop as well as updating existing drivers/software.

  I hope that you will find useful information.  Have a great day!

• FCA202 7 - driver problems - Windows 64-bit operating system!

  I had this FCA202 interface today and im having a LOT of trouble of implementation... I got the internet 1.3 update, but it says it's for 32-bit operating systems... and ive tried everything looks... I can't install the drivers! Help!

  Hi Mike,.

  For assistance, please provide brand and full model number.

  We need to check if your device is compatible with Windows 7.  See the Windows 7 Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=FCA202

  You can follow the steps mentioned in the link below

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please contact the manufacturer of your device for known problems.

• Cannot upgrade Windows 7 operating system.

  Original title: update Windows

  Mr President.
  Am using Windows 7 Ultimate 64 Bit & my laptop Configuration is: -.

  Processors: - Intel i3 - 2310 m @2. 10 Ghz
  RAM :-2Go

  I had to download Windows 8 Upgrade Wizard at level to check the result of compatibility. Please see my Compatible report and Tell Me I have Windows updated or not. Please see my attachment.

  https://onedrive.live.com/redir?resid=9ff636d2e6bf0bdf! 664 & authkey =! AABF5wAP3AVsRjU & v = 3 & ithint = picture % 2cpng or https://onedrive.live.com/redir?resid=9ff636d2e6bf0bdf 665 & authkey =! AELuHG5AMfCr5bU & v = 3 & ithint = % 2cpng photo

  Honestly, it is useless... In late summer, Windows 7 will be eligible for a free upgrade of Windows 10 and Windows 8.1 will be eligible for a free upgrade for Windows 10. If you buy Windows 8.1 now, you pay full price for an operating system you will use only for a couple of months.

  Spend money to upgrade your hardware, for example the RAM and possibly install a SSD.

  This will make the system runs a lot better when you upgrade to Windows 10. What is the brand and model of your system?

• Can I install Windows XP first so I can install my upgrade Windows 7 operating system.

  Installation of Windows 7

  I had originally bought and downloaded the upgrade of Windows 7.  I am now faced with having to re - install Windows 7 because I'm upgrading to disks.  What I have to install Windows XP, then 7 because I bought the upgrade or there at - it a way to install 7 directly without having to go through the extra step... Thank you!

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.