HP D 5360 will not print on both sides of the page

Similar Questions

• HP officejet 4630 will not print on both sides of the paper

  Unable to print on both sides of the paper. The backsideprints first, then wait for the ink to dry, front end starts to print then stops with a windows error message popping up on the screen saying cannot print the document.

  I found that I can't print multiple pages either. For example, I decided to print the document of 4 pages in the form of simple pages only (since double-sided would not work) and the results were first page print second page prints on a third, and then just stop with error message this printer cannot print the pdf document. If I had to select each separately page to finnally get all four printed pages. HP print and scan diagnosis says theres no problem. Windows diagnostics says there is no problem.

  Obviously there is a problem can offer advice and the solution?

  Thank you

  Kimoho

  To all,

  Thanks a lot for your suggestions. I would like to point out that the problem was solved and printer works fine.

  The solution is one of the two things?

  First, I opened the windows firewall and allows all applications and processes to pass through. There may be a few dozens of them, some have been verified and how some have been blocked. I checked all except those who started with 'remote '.

  Second, I went on the printer software and returned the IP address of the printer. It was the same as the IP address, but somewhere on the microsoft blog, I read that windows and routers sometimes lost the IP address. That's why I'm re-entered.

  I don't know which of these fixed the issue, but one of them did.

  Thanks again

  Kimoho

• Print on both sides of the page

  For printing on both sides of the page, the instructions say to FLIP on LONG EDGE or RETURN on SHORT EDGE.   WHAT WOULD BE THE CRITERIA FOR THE REVERSAL OF ONE WAY OR THE OTHER?  I'm printing docs on 8-1/2 x 11 paper. 1 set of docs is 14 unique pages that I could turn it into 7 if I could print on both sides.

  Instructions more tell - printer is will automatically load the back paper to print on the other side. Someone please help me understand these instructions?  Thank you.  Judy

  > to FLIP on LONG EDGE or RETURN on SHORT EDGE.

  This difference is important if you want to print portrait vs landscape.

  For the first case, you usually run flip on the long side, on the side.

• Not printing on both sides

  After that my last windows update, my printer does not print double-sided.
  I already reinstalled the printer, which is currently installed with the name of the driver HP Officejet 7610 Series class, even though it is an Officejet 7612.

  The printer works, but it is not printing on both sides.

  What can we do?

  @HenriqueCanada

  Check this duplex is enabled:

  Control Panel > display icon > devices and printers > right click on the printer >

  Printer properties > ( generaltab: change properties) >

  the device settings tab > next to automatic duplex printing: select installed > OK

  

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• two face automatic printing both sides of the page, does not work. Why?

  I have a printer with auto print both sides of the page. It does not work. Why?

  Some printers require a separate duplex adapter must be installed in the printer. He might be able, but the part is missing. Additionally, make sure that you use the printer drivers printer manufacturers, not those provided with Windows.

  Is what printer model?

• ENVY 120 CZ022B: How to print a word document on both sides of the page (MAC)

  How to print a word document on both sides of the page (MAC) I can´t find how do!

  Hello
  Follow these steps to automatically print double-sided in Word print jobs:

  In the file being used to print click the file menu and select print.
  NOTE: The print window might be minimized. Press show details to show all available print option.

  Click Copy Pages & drop doen and select layout.

  Set the duplex option as the binding edge (Portrait) Long or short edge (landscape) bond.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?

  HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?  I looked everywhere I can think of. You are my last resort.

  Windows 7 ~ 64-bit

  Hello

  Unfortunately, this printer does NOT support duplexing (printing on both sides):

  http://support.HP.com/us-en/document/c02231304

  Kind regards.

• How to print on both sides of the paper with deskjet 9800

  Hello

  I'm trying to print on both sides of the paper.  I have a deskjet 9800.  I select two sided, but it will print one page after another.  Even pages are 'upside down '.

  Would appreciate help with this.

  Hello

  I think that it is an old printer and it MUST have a duplex unit to be able to print both side automatically if yu have to print manually (turn inside papers yourself):

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay?docid=c00283626&AC.admitted=1414613820848.876444892.492883150

  Kind regards.

• How can I print on both sides of the software adobe reader on my mac

  I wanted to print on both sides of the software adobe reader on my mac he give me the ability to print directly from a file loaded down with an email

  I tried to print another document infact a page of e-mail, he gave me a double option face why can't print with adobe reader software?

  Hi dianah71252428,

  Adobe Reader and Adobe Acrobat allow you to print double-sided if your printer supports this feature. The printer driver controls the options, not Adobe Acrobat or Adobe Reader. Check your printer documentation to see what features your printer supports. (Double-sided printing is also called duplex, back to back, front and back, or double-sided printing).

  Refer to this KB document for help double-sided printing. Adobe Acrobat, Reader

  Kind regards
  Nicos

• print on both sides of the paper

  I have a Brother printer that is capable of printing on both sides of the paper.  I have 10 Windows and the version of Adobe Reader X installed 10.1.15.

  My function for printing on both sides of the paper is no longer appears on my screen printing options.  I can do this on other applications, Word etc.

  Any help would be appreciated

  Hey leathac52847786,

  Do a selection for printing on Both Sides option is the features of your printer, no drive.

  You may need to make sure your printer supports duplex printing and this feature is not cut.

  Please consult the following KB link doc and see about the same:

  Double-sided printing. Acrobat, Reader

  Let me know if this helps.

  Kind regards

  Ana Maria

• How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer.  Think of it as a broad a page roll.

  When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.

  Some printers are capable of automatic double-sided printing.  With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages.  You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.

• HP officejet 8500 has more will not print black and white because the color cartridge is low

  I have entered the property and set it to 'levels of gray' and 'use black ink only', but the printer still will not print because "the yellow ink cartridge is low.

  incredibly frustrating that the cartridges of color completely stop you from printing, even if you are trying to print in color.

  Proffessional OS-windows 7

  is there a known solution for this?

  Unfortunately, the printer does not print until the replacement of the yellow ink. There is no work around for low ink message.

• How to print a book on both sides of the page with the zoom.

  Hi I have a book of 100 small pages in book format and I want to print this book on both sides of the paper with two pages per side.

  I use windows XP and adobe acrobat reader XI version greater than 11.0 and an old printer.

  I tried to do and print two pages on one side by selecting multiple option in the layout, but there is no zoom I mean very tiny were printed and the remaining space was wasted.

  Then in order to print the even pages on the one hand and the odd pages on the other side, I tried to print the odd pages first in vain, I mean that all pages have been printed by also including the odd pages.

  For this I followed the instructions on the next page

  http://howtoprintdoublesided.com/how-to-print-double-sided-PDF/

  Please suggest how the two above can be carried out at the same time.

  Kind regards

  Rupesh.

  Hi Rupesh,

  To print the file to the scale, you can set the value in % in the impression under custom scale option dialog box.

  For double-sided printing click the properties button next to the printer you selected.

  Here you will get all the print properties that a printer supports.

  You can choose to print both side if it is available.

  Thank you

  Abhishek

• Will not print, but 1/2 on the firefox page and only see half of the page to print preview, but will be printwhole page of IE and quickbooks.

  When I try to print anything on the Web, only the left part of the page will print, nothing in the middle right of the page display. It presents this when you preview before printing. I tried taking OFF reduced to fit and it still does not show the right half of the page, printing is just bigger.
  I can print anything Internet Explorer and Quickbooks, but not from Firefox. I downloaded all the versions up to 5.0. He did print prior to upgrade, but I don't know which version actually worked.

  See if the troubleshooting steps in this article solve your problem: problems printing web pages.

• Photosmart HP: HP Photosmart printer will not print anything other than a Web page

  Someone please help.  I'm so frustrated right now.  My printer has stopped printing another thing than Web pages.  If I try to print a word document, there is nothing to print.  She acts like it is printing but nothing goes on paper.  If I try to print a pdf file... I got the text, but for most of the lines of the text.  The only thing I can print now is Web pages.  It is zero logic.  I have reset the printer. I unplugged the printer.  I deleted the printer.  I have readded the printer.  I tried almost everything what I found on these sites and nothing works.  I noticed it would not print this past Sunday and I finally had the time to watch tonight and I can't fix it.  I thought I ran out of ink or something, but these are all fresh cartridges and the printer test works.  Also, as I've shared it it will print Web pages.  Just nothing else that me is not good when working on papers for my master's program.  Help!

  Hello @sdock,

  It is a great place to get help! I read your post and see that you cannot print of all applications on the Mac, but you can print a self test and on the web. I want to help you solve this problem.

  I tabled this document with a few additional steps that you can try to solve this problem: "Printer offline" or "Printer not responding" Message (OS X).

  Let me know what printer you have and the type of connection, if you have any additional questions.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!