HP Deskjet 3055A (AIO) - El software is instala in frances

Similar Questions

• Install deskjet 2050a AIO errors

  I have a deskjet 2050a AIO and a HP Pavilion dv7 laptop and having problems installing the printer driver.  I uninstalled the drivers and tried again and nothing worked.  has gone through all steps at HP offers you a solution to your desktop and still nothing worked.

  any help?

  Hi Sunshyn,

  Thank you very much.  The Microsoft ' Fix It' tool worked perfectly.  Really appreciate your time taken to tide me over.

  Kind regards

  Anodomino

• I need help for Deskjet F4280 AiO

  I bought the machine 5/1 & think I've read everything that is available, but still can't really understand it. I'm not computer smart but have had or used several different AiO over the years that are simple to use, almost just a matter of a few clicks to get the job done.  I'm not working with pictures right now, but really need to be able to scan documents to my email & is there lies the biggest problem.  It seems that just uses something Microsoft Office & PDF & Tiff.  It's waay too big; I didn't even know that was my Office, do not know how to use it; & don't know piddley on PDF.   I installed it maybe wrong?  I'm finished with 9 points in my Add / Remove list.  Also, on a page where I was looking for help, there was something on "alerts for this product: Customer Participation program software, critical update" & a broad yellow streak down my back so I don't click it, I don't know what it is called, is something I really need to do?

  Sorry for my ignorance.

  I have the Deskjet F4280 AiO

  Windows XP SP3 home edition

  AiO is connected by USB cable

  I connect to the Internet by cable broadband

  Thank you.

  Guess I'll go ahead & closes, but doubt will be of no help to anyone else, since it is this mixture of different region.

  My original well on "scan to e-mail" problem (1 post) is still not resolved, so I started a new one yesterday under scan, fax and copy Board.  I realize there are a few answers to my scan problem initially but if I remember correctly I still couldn't it.  Most likely, the problem lies in the ditz that tape now.

  Thank you once again Dexter for all your help,

  crackers

• HP Deskjet 3055a can't scan to PDF

  I have a step scan to PDF using my HP 3055 a Deskjet printer.

  I use Windows 8.1, and I am using the desktop Panel. If I choose jpg is working allright, but if choose pdf, an error message shows up after a while, advising my to verify the network etc. The network works fine and I can print and scan in jpg format, but simply not in pdf format.

  Hey @nbolesen,

  Welcome to the Forums of HP Support!
  
  I would like to help you today to solve problems PDF Scan that you encounter on your HP Deskjet 3055a e-all-in-one printer on your computer Windows 8.1. Because the product is able to scan JPEG files very well we know at this time that the hardware on your product is very good. Because PDF files rely on a PDF reader to manage and view the PDF scans it maybe a problem with the PDF reader on your computer.

  Now, you mentioned that you use the desktop Panel. Do you mean the control panel of the printer or the scanner software HP desktop computer?

  How to scan from HP scanning software:

  1. on the desktop of your computer, open the HP printer Assistant. It should look like a black printer icon on your desktop ().

  2. once the Printer Wizard opens, select scan a Document or Photo

  3. once scanning HP launches, choose Save as PDF

  4. load a test on your product page and click Scan on the HP software on your computer

  This scan and register successfully?

  How to scan from the printer control panel:

  1. on the product control panel, press the button () next to Scan.

  2. press the button () next to the down arrow () to scroll and select your computer.

  3. press the button () next to the name of the computer on which you want to save the scan. The product scans the document or image and then stores it in a PDF file to the computer.

  This scan and register successfully?

  If the two methods don't scan PDF on your computer, please try loading the latest version of Adobe Reader and again test the scan function.

  Adobe Reader

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• DeskJet 3055 has J11n: connect Deskjet 3055a J11n wireless network without PIN or WPSA and with Mac Mavericks

  Hello

  I run a Mac with Yosemite and would like to add the printer Hp Deskjet 3055a J11n for the wireless network.

  My router doesn't have any a WPSA button and not a PIN code.

  Before, when I used Mac OS 10.6, I could run the features of the CD that came with the Hp Printer.

  When I try to open the Setup from the CD on Yosemite, he says 'cannot open only on Mac 10.6.

  How can I connect the printer to my wireless network?

  Thank you!!

  Marjolein

  Hi @MarjoleinPeters,

  A driver full features for Yosemite is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.7 (Lion), 10.8 (Mountain Lion), 10.6 (Snow Leopard), 10.9 (Mavericks), and 10.10 (Yosemite) who have only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should then start flashing, this means that it is now in auto wireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. For automatic wireless default IP address is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup Wizard along on the left hand side to begin to set up the printer wireless.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you.

• Satellite Pro P100 Question on software pre-installed

  I bought a Toshiba laptop in July and although I am very happy with the machine.

  I'm very upset that he came with very little software that I expected at least MS works or similar for a professional laptop, but there is nothing (no spreadsheet, text or data processing)

  After spending more than £1,000. I'm a little annoyed - don't know if it's a world of Toshiba or PC Business (people, I bought it from) error.

  One of my colleagues bought a laptop the week £600 last and which have very many useful software pre-installation.

  Hello

  You talk about the Satellite Pro P100 PSPA4E series?

  If you really this machine then I put t agree with you!
  To my knowledge of many tools and utilities and additional programs have been installed on this laptop.
  Maybe a small list?
  Here you are:
  -Office OneNote2003
  -TOSHIBA utilities
  -WinDVD
  -Platinum WinDVD Creator2
  -Sonic DLA
  -Symantec Norton AntiVirus 2006
  -PC Diagnostic tool
  -Etc.

  Please note that the software package Microsoft Office OneNote offers several useful simple programs!

  May I ask why you compare one satellite Pro P100 with other laptops who don t support the same processor, the graphics card performance and additional features?

  From my personal experience of many manufacturers of laptop while customers with software pre-installed because that the performance of the laptop or simple parts (graphics card, HARD drive, memory IE) are not approximately the same mostly.

  Last but not least; I put t really understand why you're a little annoyed.
  Why you didn t check the laptop and the description?
  Do you always buy a cat in a bag?

  Really strange guy?  :|

• Re: Satellite C870 - Questions about Toshiba software pre-installed

  Hello..

  Instant Messaging user a new SATELLITE C870-1JV
  Or seen a review on an American site saying that all software pre-installed Toshiba slowing down the operating system.
  The site has recommended that a windows clean install to remove all...

  Everyone does this, or would you recommend?

  Anyone like the software installed and recommend keep it?

  Thank you!!

  > Someone has he done this, or would you recommend?
  You always want to use the advanced features like function keys laptop?
  If so, don t remove the feature key Toshiba software that controls the keys.

  You always want to be informed of updates to the driver through Toshiba Tempro or Toshiba Service Station?
  Then don t delete these software

  But as far as I know there are also other additional software installed on the laptop.
  For example: TOSHIBA, TOSHIBA Eco Utility, TOSHIBA PC Health Monitor, etc.
  All of these tools provide additional functionality, it s your decision whether or not you want to use.

• How to download the software pre-installed?

  You can download and reinstall the software already installed on Toshiba laptops.

  I've upgraded to a SSD drive which was smaller than the original hard drive so I had to perform a clean installation and therefore could not keep my other software such as Win DVD, which is essentially what I'm trying to recover.

  I have a recovery disc but am afraid if I use it could cause problems and that the new SSD drive works like a dream, I don't want to chance it.

  The 3 rd party software can be downloaded on the Web from Toshiba site due to copyright restrictions.
  You can download only the Toshiba Software, drivers and tools.

  If you want to use the 3 rd party software, which is part of the image of Toshiba, you must recover the laptop using Toshiba recovery disc.

• IP address for deskjet 3055A js11

  ineed the IP for deskjet 3055A j611

  Hello

  It's in your home network, we do not know. You can find the IP addresses of your home network by issuing a command in Windows. The next step is for Windows 7:

  b click Start,

  b type cmd in the box of serch that press ENTER,

  (c) type IPCONFIG, and then press ENTER.

  You can see a list of all devices/computers on your home network.

  Kind regards.

• Sony Vaio Duo 11 software pre-installed

  I see references in reviews of Sony Vaio Duo 11-preinstalle Add on PowerPoint and Adobe Photoshop Elemments 10.

  I can't find mentioned previously on my Duo 11.

  Is there a way to download these addons?

  I have a problem do not have art rage avilable studio for my vaio duo 11. It did not clearly or at all when the new option selectign departure that rage of art studio is not available. the reason why I went with option new start was because I wanted to choose which software to install. According to me, it's a question as art rage was a big part of my voluntary decision to purchase laptop, and I hope that this issue will be resolved.

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• Cannot find "automatic detection" to reinstall the software pre-installed on my desktop after installing win7

  I did a full install of win7 from vista on my hp Pavilion a6250z desktop which has deleted my preinstalled software that came with the computer.  They told me to go to hp and run detection system to reinstall the software, but after a lot of research were not able to find auto-detection. Any ideas on where should I look for?  Thank you!

  What we call "automatic detection" can be found HERE. The only thing he finds some drivers and install some software updates for your original Vista. HP no longer provides the software pre-installed on their Web site.

  My experience is that if you have created your HP recovery disks when you got the computer or just before you did a clean install of Windows 7, you should be able to find most of the original software on the discs. Insert the HP recovery disc in the DVD drive and navigate to the folder "HP". In this folder should be a file 'Drvr' and a file 'Apps '. You should be able to find the software preinstalled in the "Apps" folder Note that some programs may not work correctly because they were not designed to be used with Windows 7.

  Frank

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to install the software pre-installed on dm1-4118au?

  I have a pavilion dm1-4118au that comes with windows 7starter kit. I upgraded the memory to 4 GB and installed windows 7 ultimate. How can I install the software pre-installed?

  (1) more simple to get this working is machine to recover from drive D by pressing f11 when the computer starts.

  (2) install OS using the media created by you (incase you have created the media before formatting the computer or OS currputs). Start with 1 disc, and follow the steps to install the operating system.

  If you have already formatted the computer and there is no D drive or drives more.

  (3) order support from HP HP recovery and install the OS using these disks. Here's the link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Please be informed that recovery is going to re install the operating system, drivers, and applications. in this process, you lose all the data on your computer, please take care of the data before you start the recovery process.

• Install the Kodak ESP5250 printer software and install Windows updates

  My father-in-law bought a Kodak ESP5250 printer last week, we tried to install the software without success. I was even in remote access with Kodak technology for 5 hours. There seems to be a problem with Windows Vista that will not allow the software to install. In addition, the automatic update of Windows has tried for more than a week to download and install updates of security on his computer, he has let stand for 24 hours and it will not install updates.
  He runs a Dell 1545 with Windows Vista service pack 2 Dual Core T4200 CPU and 3.0 GB of RAM.
  Can you help me solve these problems?

  Hi kcbell1953,

  Thank you for the information.

  Did you follow the steps I have provided?

  I suggest to follow the steps mentioned in the previous post and then try to install the printer software.

  You can try the following steps to install the windows updates:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  Step 2: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once everything is done.

  Step 3: Put the computer in a clean boot

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Now try to install the updates, try to install only some updates at the same time.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.