HP Deskjet 3755: "this wifi network is not supported by the device.

Similar Questions

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.

• BIOS error 104: network card not supported after the update of the bios, HP G60

  Recently, my hard drive has begun to fail. I bought a new drive, installed a Windows 7 ISO on a flash drive, installed etc. I have a HP G60-237NR. I have reinstall everything, and then I went to the page of the drivers for my laptop. I started to install stuff, at that time there I was bored so I'd sort of from the bottom to the top if this order of the questions, I can give more details on that if I need to. I downloaded the BIOS update, because I thought that "good, he he listed for my computer, I have no doubt it needs to be updated since my laptop like 6 years. Flashed the BIOS, my computer shut down and restart didn't like I thought he was supposed to. I turned on and well 'device 104 - unsupported of detected wireless network. System stopped. Remove device and restart. "I tried to find out what to do, which told me to remove the network adapter, the bios downgrade, plug it back and you're good. Well, I unplugged my network card and the snap-snap-in two sons who attaches and restarted, he did all the stuff. I got the same error. EDIT: I meant I plugged my network back in, but still got the error. Where I had the clichés about evil, I passed the clichés and double checked the connections maps, but still nothing. Everything I found said that should have worked, I'm on the same version of the BIOS, I started with that, but it does not recognize my network card. What am I doing here? Please help, thanks.

  Hello
  
  When you have the outside wireless card, you have the error?
  
  If this isn't the case, then you can get necessary to replace the wireless adapter. I would not be able to explain how, but something may have cause to fail.
  
  You can find maps of replacement of support on page 16 Chapter 4 of the Guide Service and Maintenance for your laptop.
  
  I hope this helps.

• Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40

  Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.
  I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.

  Can anyone help?

  Do you mean the LAN card?
  What status of LAN card appears in Device Manager?

• EtherCAT: "found a module not supported on the slave device"?

  Hello

  I have a CompactRIO system that uses of slave hunts EtherCAT (cRIO-9081 + cRIO-9144) when I tried to deploy my settings, I got this message:

  Found a module not supported on the device slave address 0: 32445 slot

  What does that mean? (I have several slaves Garland, but of course, I don't have that many slot machines!) The chassis that has been reported with a red exclamation point contains these modules:

  • NI9201
  
  
  • NI9203
  
  
  • NI9265
  
  
  • NI9421
  
  
  • NI9481

  Is one of them unsupported on EtherCAT? If so, is there a list of modules taken into charge/no supported somewhere?

  Thank you!

  Hey there,

  I think you'd find this knowledge base, http://digital.ni.com/public.nsf/allkb/CA3A1D2166A4591386257514007A0F9C?OpenDocument , useful. It would be better to check what version of DAQmx you use and check the readme associated for compatibility or verify this DeveloperZone, http://www.ni.com/white-paper/10462/en. I hope this helps.

• My wifi network does not connect automatically

  Hi all

  im a user frustrated.

  My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

  I also deleted the list of networks do not forget and do it again. Any help?

  Much appreciated guys.

  

  create another user account and start to this account, set up a wi - fi connection and restart to this account.

  Is the same behavior?

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Home Wifi network is not detectable!

  After implementing the lollipop, the my home WiFi network is not detectable on my motorcycle G. All other Wifi networks nearby make their appearance as usual except for the WiFi in my house.

  I tried the partition hiding wiping. Did not help.

  Then I did a hard reset on my device, after speaking to a Motorola Assistant, did not help.

  Is there something wrong with my router or my device?

  Lollipop does not allow for channels above 11 in Wifi - is your router set to use channels 12 or 13? It's the only thing that has changed in lollipop I know.

• HP Premium - why 'Properties of the wireless network' did not appear in the settings!

  Hi, I have updated the firmware on my HP Calculator first, and since then "wireless network properties" have disappeared from the settings. Basically, there are four pages of settings and now there are only three!

  On the other hand, the emulator yet I have this option available on page four of the parameters, as well as the wireless icon on the title bar next to the time (on the upper right corner of the scree).

  Anyone know what's the problem? Why my emulator has the option but the calculator itself not?

  Thank you

  Sam

  Hello

  The problem is that the material of NW280AA does not support:

  Since the notes version 6031:

  "1. When you use HP StreamSmart 410 (NW278AA), the graphic calculator HP first (G8X92AA) now provides the power supply via the USB port."

  This power would probably be necessary for the device wireless also.

  (only compatible with the http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA5-4132ENW.pdf of America G8X92AA)

  This we can assume that nw280aa does not provide the necessary power, lacks any firmware that tries to use anyway.

  If this feature is important to you, I suggest you only to contact HP for a replacement.

  Best regards.

• The sim card that you are currently installed in this iPhone is a carrier that is not supported under the activation policy that is currently affected by activation serv

  The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...

  Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls

• I get the message "this search engine is not supported by Firefox and cannot be installed" whenever I try to install a plugin to search on the Mozilla Add-ons site. Why?

  Any search plugin I chose to install it from the list of search plugins FireFox on the Mozilla Add-ons site, I get the same error message - "this search engine is not supported by FireFox and can not be installed. I tried to delete the 3 files in my profile identified in the article on troubleshooting plugins, but it did not help. I am running Firefox with administrator privileges, but it does not help. The problem seems to be with the search plugins. I can install other extensions that are not plugins from the Mozilla Add-ons site search, but not the search plugins. I tried restarting FireFox and restarting the computer severaltimes, but I get the same error message when I try to install a search plugin.

  Something is messed up on the pages of plugins MySapce AMO. Clear the URL bar and type something here (but do not hit Enter) - then you should be able to proceed with the installation of a search plugin.

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Hi mariart

  Welcome to the Microsoft Answers Forum!

  ·         What format of picture or video file you are trying to open using the Windows Photo Gallery?

  Here is the link that will give you the description of the Windows Photo Gallery: Windows Photo Gallery: frequently asked questions

  Make sure that the Windows Photo Gallery is the default value. Steps to follow:

  i. Click Start, in the search box type in default of program

  II. Select set your default programs

  III. click the windows photo gallery, and then select set this program as default

  Link for reference: change that uses default Windows programs

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.