HP Deskjet 4200 Series not Compatiable with Windows 7

Similar Questions

• HP Deskjet F4850 is not compatible with window 8. Is there a driver for this update?

  I just bought a new laptop with Windows 8. HP Deskjet F4850 is not compatible with window 8. Is there a driver for this update?

  Hello

  The printer make compatible with Windows 8, of course not the original CD which is way before Windows 8.

  Download and install the software below, for USB connection remember to keep the cable disconnected until you will have to connect:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109196-2&cc=us&DLC=en&LC=en&OS=4131&product=3944758&sw_lang=

  Shlomi

• DeskJet F4200 Series CD Incompatible with Windows 7

  Hello!

  Now I have a new HP G62 Notebook with Windows 7, 64-bit, and the CD for my Deskjet F2400 gives an incompatibility message when inserted in my notebook. The CD is for Vista and earlier operating systems.

  I downloaded/installed something called "dot4patch_reboot", I found a solution in the support section, but always the same 'inconsistent' message appears.

  A sollution that works?

  I suggest you go to this site www.hp.com/support

  take note of the number of your product for your printer, then put on this Web site and when you get to the page where you will be asked for your operating system checked if there is a driver for a windows 7...

  If there is:

  1. choose the proper win 7 x 64, and then click Next

  2 locate the pilot field and then select or search for full features software

  3 dl and install

  ENJOY!

• HP DESKJET 710C DOES NOT WORK WITH WINDOWS 7 64 BIT

  ANY IDEA OF IT PLEASE? The printer worked fine with Windows 98, Windows XP Home Edition, now I'm on Windows 7 64 bit, that the printer will not print even if the printer shows as installed & working?

  This has nothing to do with the Windows Update feature. That being said...

  This page suggests that your Deskjet 710C is not supported in Win7 (32 bit or 64 bit)-online http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14543&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=25401

  For more information, contact HP support.

  PS: You can check this (old) associated with thread in the community forums of HP, too-online http://h30434.www3.hp.com/t5/Windows-7-Beta-and-test/HP-Deskjet-710C-in-Windows-7/td-p/126893

  Tip: If you do get the printer works in Win7, I can guarantee that it won't work with installed IE9 (at least as far as printing the pages Web are concerned).

• Fujitsu laptop computer: HP Deskjet 5150 is not compatible with Windows 10

  Before I update, I need to know that my printer will be compatible.

  It is old but good and reliable, so don't want to by a new.

  Anyone know?

  As soon as the final version of Windows 10 is released, see the HP web site for your printer for supported drivers. But everyone knows that you should never move to a new version of Windows until at least 6 months after the definitive introduction.

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• HP Deskjet 2544: HP Deskjet 2540 Series not found - Error Message

  Hello

  I'm getting "HP Deskjet 2540 Series not found" - Error Message When I tried to scan...

  I have recently upgraded to windows 10. I get the same error message when I trobleshoot using 'doctor print and Scan '.

  Please fo help me solve this problem...

  Thank you...

  Hey @HpUser83,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve the 'HP Deskjet 2540 Series not found' scan error you get when the all-in-one printer HP Deskjet 2544 scanning to your computer Windows 10. There is probably a software or driver error occurring. Can I please you follow the steps below to resolve this error.

  If you use a USB cable between the printer and the computer connection, please unplug this cable now.

  Step 1: Remove the driver:

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Remove temporary files:

  1. click on the Start menu

  2. type run. Click on Run to launch the run dialogue box.

  

  3. tap folder in the run box, and then click OK

  

  4. when the Temp folder, open select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  6. close the Temp folder when it is empty

  7. right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download and install the package to the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once the installation is completed successfully, please test scan.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Deskjet 3420 does not work with Win 8?

  Hi all!

  I am facing a lot of problems with my printer (Desket 3420) that doesn't seem to work with Win 8. I installed it first with the 'old' drivers supplied with the original CD, and then, when I discovered the problems of compatibility, I tried the Deskjet 3600 drivers provided by Windows Update.

  The printer seems to be properly installed and "ready" (if I can see in Control Panel), but every time I launch he grabs a sheet and seems to start printing but awkwardly, with characters bad and extremely slow, even if I set the option "starts printing immediately" or, Alternatively, "start printing when the coil is complete! Also when I try to delete a document in the print queue, it seems not respond!

  Can someone help me find a solution? There is the chance to use this printer with Win 8 or I have to buy a recent news?

  Thank you for the support.

  Hello

  As you can see below, I'm afraid your pritner is not compatible with Windows 8:

  http://support.HP.com/us-en/document/c03457812

  Shlomi

• HP Mini 110-3101TU: HP Mini 110-3101TU is not compatible with Windows 10?

  I've been running my HP Mini laptop in Windows 7, IE11 with an external (extended desktop) Samsung SyncMaster LS23A300BS/XP with no problems of navigation. All drivers up to date. I received a free upgrade for Windows 10 I installed online 2 weeks ago and have not been able to make a good navigation on the internet yet, either on board or IE11: both crash in browsers after a 2nd or 3rd browser, blocking and the opening page process may not be finished in Manager tasks so that Windows can not stop (you need to disconnect). I followed all the advice, corrections and common sense (clean boot) pertaining to this crash, but nothing works. On top of this crash, there is a problem with the application of Windows Explorer which can not read a statement in memory at shutdown of Windows 10 and must be closed in the first place. The last problem occurs only (I think) when working with the external montor, when I work with the laptop only I've not seen this message (can not read the instructions...) when stopped down, but blocks the navigation happens tirelessly with one or two monitors.

  I played with the DNS (using automatic 8.8.8.8 etc. and DNS), I also run a PowerShell (tip forum) command and disabled non-Windows file extensions and all supplements but did not touch the registry other than adding two words for maximum 10 tabs/server. Nothing helps.

  Question: My Mini laptop too old and incompatible (surfing the internet) with Windows 10 or maybe Windows 10 faulty (buggy)?

  I am writing this post with my old Compac HP 8710p with the same monitor external but digital (DVI/HDMI cable) in VistaSP2 32bits Business that works like a 'charm' (pun intended). I could not even connect you to this forum with Windows (crash) 10.

  Any suggestions and help would be appreciated

  Track 5 September 19:00 (GMT + 8 hrs.)

  Not crashing with browsers (Edge and IE11) but still very slow and often-page response cannot be found and freeze, then after updating but I am now able to close the frozen pages (no more crashing, process in normal Task Manager). The message Windows Explorer app that it cannot read a statement in memory occurs that when my external browser is connected (2 active monitors) and does not show using my laptop just so it's probably Intel graphics driver related. I didn't know I was downloading Defender 5 updates yesterday that there is nowhere a notification in Windows, 10 with a slow (home, 2 G WIFI) internet connection may have caused some of my problems, but Microsoft has promised to look into the crash problems I brought today and I'll post the results shortly. I type this follow-up with my HP Mini and IE11, Windows 10...

  Frank

  To follow this thread on the Microsoft Forum please see:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/HP-mini-110-3101tu-not-compatible-with-Windows-10/262e92c9-5f73-4333-BC46-fb5b229fbdea

  Frank

  Updated: 9 September

  I found three issues that I fixed and most of the problems have disappeared now, internet Windows response is still slow compared to VistaSP2 and IE9 but which can improve with W10 updated.

  The last driver Synaptics touchpad from Synaptics and Windows 10 fix1 support web page: load automatically downloaded an update.

  Correction 2: Downloaded Intel driver 3150 8.14.10.2230 (2010) of the web page of the HP support and ran Windows 10 compatibility check, saved results to setup.exe and then install the (older) driver on my graphics driver (2015) Intel 3150 more recent that I have downloaded from the Intel support web page but is not compatible with the HP Mini 110 series. This caused the accidents of Edge and IE11 (zoom).

  Fix 3: run 2 commands (admin) NETSH: netsh winsock reset and netsh int ip reset c:\resetlog.txt which improves the response of browsers, but after restarting the need for procedures to be repeated, if all goes well in a future update of the W10, will address this issue.

  I think that my HP Mini is now compatible Windows 10

  Frank

• My webcam does not work with Windows 7

  I tried to install my Logitech webcam for my new laptop which has windows 7, but it says that the webcam is not compatiable with this operating system. Is it possible for me to install my webcam on my pc? The webcam I have is a Quickcam for notebooks M/N: V-UBS47... If there is no luck with getting it installed, webcams are compatiable for Windows7?

  Your webcam drivers from the manufacturer of the webcam needs, allowing him to talk to any operating system that you have installed.  You need to go to the site web page/support from the manufacturer to your webcam and see if they support the material in your chosen new OS and download / install the appropriate drivers/software.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Qosmio F50 - 108 - Toshiba Flash Cards will not work with Windows 7

  Hello

  anyone tried to install Windows Seven? I tried.
  Everything works fine (Wlan, Lan, sound, etc.), but one thing is unable to work on my laptop: Toshiba Flash Cards.
  I installed the driver, and nothing happened...

  Any idea to solve this problem? Because I usually used it in Vista.

  Thank you and sorry for my English ;-)

  Hello

  The Toshiba Flash Cards has been designed for Windows Vista only

  Windows 7 is very similar to the Vista and many pilots could and would go with Windows 7, but in very rare cases certain tools would not fully compatible

  The Toshiba Flash Cards is not a driver; It s a utility that seems to be is not compatible with Windows 7

  Good bye

• Satellite C660-1CN - touchpad do not start with Windows

  Hello
  I have problem with Toshiba Satellite C660 - 1CN PSC0QE.

  Touchpad do not start with Windows 7 Home Premium.
  All the drivers are up to date.
  BIOS - lastest.

  After logon, I need to click on * double * "FN + F9" and after it is OK until the next reboot.

  I tried:
  several drivers of Synaptics - no change.
  Reinstall Windows - no change.
  Mini Windows XP Hiren - no work.
  Default BIOS - no change

  After that I installed 'toshiba value added package' I can't turn on the touch pad at all.

  To be honest, I never heard the show. According to specification for laptop, your laptop came with Win7 home premium 64-bit. With factory settings touchpad should be activated after the OS has started.
  I can read you have reinstalled Windows. Have you reinstalled with the original recovery image and tested with factory settings?

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Compaq Presario: NVIDIA GeForce 6150SE nForce 430 chipset is not compatible with Windows 10

  I try to upgrade to Windows 10 and I get message that current chipset is not compatible with Windows 10. My PC is Compaq Presario motherboard M2N68-(NARRA5). Is there a graphics card for this motherboard is compatible Windows 10?

  You need to burn a DVD to install windows 10. It's going by checking the video card. https://www.Microsoft.com/en-us/software-download/Windows10 32-bit or 64-bit. Then after win 10 is installed, and then install the 32-bit or 64-bit driver http://www.geforce.com/drivers/results/82758 64-bit video dated the 2015 http://www.geforce.com/drivers/results/82701 32-bit dated 2015 good luck it really works