HP Deskjet D1341: Deskjet D1341

Similar Questions

• DESKJET D1341 PRINTER WORKS DO NOT HELP - 911

  I just reinstalled windows xp professional sp2 for my dc5100.  OK, it's all good.  I also reinstalled my printer deskjet d1341 as well.  During installation when you are prompted to connect the printer, nothing happens (no recognition of sound/no the printer at all).  I clicked on the option to continue without plugging in the printer.  I have NOT received any kind of error messages.  My D1341 printer icon is visible if you goto printers/Fax and it's like my default (this is the only one).  I try to print a page, the printer icon scrolls and appears in the lower right corner of the status bar, BUT nothing DON'T get PAST.  I have the printer connected to Intel(r) 82801FM/FBM USB2 Enhanced Host Controller - 265 C.  I just click and the status is fine without errors.  BUT STILL I CAN'T PRINT.  I connected the printer to my computer compaq laptop and have no problem.  Someone can help me.  I uninstalled and reinstalled several times.  I even tried online support for 1.5hrs without a bit of luck with HP support.  Any suggestions?

  go t this forum to please and read the page on the problem of the printer that Mr. headrick wrote he actually raised my printer and running for the first time im so happy that I found his article to answer someone else I found just by reading all the problems of the people and is to try it on my own and yes it is corrected thanks to him

• Problem w / HP Deskjet D1341

  Hey, new here btw... I tried to fix the problem printer (HP Deskjet D1341) sister for awhile now it will not print anything, the power LED flashes and any PC I connect to it just says it is offline , but it is turned on and connected. When I try to print something, it doesn't make a noise and the light stops flashing, it only send the print to the print queue of the printer. I read the troubleshooting and frequently asked questions on the HP support Web site but no luck and I still have this problem. Help?

  Hello

  From what you wrote, you indicate that you have tried some troubleshooting on the web.  Have you tried to download the Print Diagnostic Utility?  This utility allows to resolove issues 'offline' for you, and if it isn't there are additional steps to try.  I posted a document from the product support site to try.

  The document contains the Print of Diagnostic Utility as one of the first steps to try; just add in the document on the operating system you are using.

  http://support.HP.com/us-en/document/c02221706

• DeskJet d1341

  I have a HP Deskjet D1341 printer has died.  Light does not illuminate.  I went to the control panel and it said printer was offlne, changed that Ready, checked all connections, tried the disc that came with the printer running, but an error message that it cannot be enforced.  Also restarted computer, still nothing.  Any suggestions or do I just need a new printer?

  Have you tried to unplug the printer for 30 seconds and plug in again? If after doing this, the unit does not turn on, check the box in the middle of the power cord. If there is a light in the box then the printer is probably (as my father says) out-of-commission. If there is no light on this box, then you probably had a power serge and blew the transformer on the power cord (in which case you might just need a new cord).

  Let me know!

• DeskJet D1341 new software message said "save the print media as" but then won't print

  HP has made a software change, so now when I try to print it says 'save the output as', but there are two problems: (1) I don't want to save the output of printing to a file - I just want to print the document, like HP used to let me do. (2) even if I enter a file name, it does still not print.

  Hi @M156

  The default value is generally Adobe, but on my computer, I opened a PDF file and the file opens in Internet Explorer, with an intake in Adobe.

  I suggest you go on the Tools button and then press or click on Manage Add-ons. Under display, tap or click all add-ons. Make sure that your Adobe add it is activated.  - Source

  

  I suggest making sure you have all your Windows updates and verification of updates of Adbove too.

  Keep me posted, thank you.

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• HP Deskjet 2640 Jet advantage: printing without margins

  I would like to know if it is possible to print borderless with the advantage of Jet HP printer jet 2640 engineering.
  If possible, I would like to know how to set up the printer for such an impression.
  Thanks for the help

  Hello

  Your ptintrt doed does not support borderless printing. Full stop. The best you can get for border is round 3.2 mm for L & r 1.5 mm for Top and 14.5 mm for the bottom.

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2640-all-in-one-printer-series/5357278/document/c03802179/

  Kind regards.

• HP Deskjet 3512 e-all-in-one Deskjet of HP P: 3512 e-all-in-one printer does not "standby mode"

  Printer will not wake from sleep mode.

  It has a static IP address. Works very well once he wakes up to the top. Doctor of Scan cannot even find it when he's asleep. 2 computers on home network have the same problems. Is there a way to disable the mode 'sleep'?

  Hi @tedd1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3512 does not wake from sleep mode. I'm happy to help with this problem!

  Please make sure that the auto power off feature is not turned on. As when it is off, you manually turn on the printer after 2 hours.

  Automatic stop function

• DeskJet F2180 + Vista 64-bit

  Hello

  I am currently in the situation that I need to print something, in the case of witch, I decided to use a HP Deskjet F2180 I had laying around. I use Windows Vista Ultimate 64-bit so I thought I was good off to download this file. Appearently that was not the case. It fails during step 3 of 4 of the installation process.

  The error States:

  SourceFile was not "C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\Toolbox\Toolbox1030.cab".

  And then it pops up with another error, a word on ""C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\hpzmsi01.exe " "

  Then it analyzes the log, and this is what is said:

  Error code: 193060200

  Now Launching = x: \hpzmsi01.exe - aioproduct_min l - XXX the list f
  X:\DIVins?. DAT
  Error message received: Sourcefile not found: X:\Toolbox1030.cab
  Make sure that the file exists and that you have access to it. -I am sure that I run the installer as administrator and I have access

  X:\Toolbox.msi failed with return code 1603
  MSIInstall() failed with 1603 for MSI Toolbox
  Exit code = 1603

  I hope that's enough for you give me a way to fix this detailed

  Sincere greetings

  its

  Message edited by its on 2008-11-23 14:46

  Try to download the software from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-1 & LC = on & DLC = in & CC = US & Product = 3177562 & os = 2100 & lang = in

  Save your desktop and run it from there...

  Keep us abreast of the concerns

• DeskJet 3632: Installing the software with the IPad

  Hi all, I just bought a deskjet 3632, I do not have a PC or laptop, so I can't install the software on the disk.

  I have an iPad,

  Please could you guide me through the steps of the installation (if possible) I've done a major boo boo, I bought the HP1512, not even give it a second thought that it would not be wireless.

  Thanks in advance

  Kee

  Hi kee,.

  Download and use the HP AiO Printer application to set up your printer on your wireless network If you have router:

  http://support.HP.com/RS-en/document/c03561640

  Open the app and click Add a new printer, and then follow the instructions on the screen.

  Note: f you can't find the name of the printer with the "setup" from the list of WiFi from your iPad, reset the printer settings by pressing on and now the buttons cancel and wireless on your printer for 3 seconds, then turn on the printer and make sure the WiFi switch on the printer flashes, otherwise press the WiFi button, and it starts flashing.

  Then follow the steps in the article to print and scan, so you can use AirPrint to print from your iPad:

  http://support.HP.com/us-en/document/c02623193

  If you have a router, connect directly to the printer using WiFi Direct, as shown below:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-4510-e-all-in-one-printer-series/5285997/model/5383027/document/c04090221/

  If you need to find the WiFi Direct password, press the Information (i) and the WiFi Direct () buttons to print a sheet with WiFi Direct name and the password, the same steps apply to print using AirPrint and scan using HP AIO remote.

  Kind regards

  Shlomi

• HP DESKJET 3545 e all-in-one: I want to know that what type of ink cartridge of contains in HP deskjet 3545 e ink advantage all-in-one

  ink used in the cartridge (dye or Pigment)

  Hello

  HP Deskjet Ink Advantaje 3545 uses cartridges HP 650 as example (or a different number of ink for different regions) - so that the black ink is pigment-based, the tricolor ink is tinted.

  Kind regards

  Shlomi

• HP Deskjet 3545: How to reset the password of admin for HP Deskjet 3545. Cannot connect to the administrator settings page.

  I put a password for the printer. And whenever I try to open a session with him, he keeps asking the user name and password. So I want to reset the password or leave the field empty. Please help urgently.

  Hi @flame_ardor,

  Welcome to the Forums of HP Support! I understand you want to reset the password for your HP Deskjet Ink Advantage 3545.

  You should be able to do this by restoring the default network settings in the front panel of the DJ 3545:

  On the printer control panel, press the Wireless button. Wireless menu.

• HP Deskjet 845c on windows 7 64 bit

  Hi evry body
  I can't install my printer on Windows 7.
  However, it is succfull installed on Vista.
  Help!

  Please, where can I find these drivers!

  Enzo says:
  Hi and thanks for writing, test what you say and always gives me the same error "windows could not get a list of devices from windows update. "Please try again later" I live in Cuba, and my connection is very slow, if I give a link where download you would be easier

  OK, this is not quite a direct link, but try the following: go to catalog Microsoft update site (you will need to use Internet Explorer, not FIrefox or another browser).  In the search box, select Deskjet 845c, and then press ENTER.  There will be a list of four choices, one you need is that which is 11.6 Mb in size (it is the 64-bit version).