HP Deskjet D1470not impression after cleaning of the cartridges

Similar Questions

• HP ALL-IN-ONE DESKJET 1051 HOW THOROUGH CLEANING OF COLOR CARTRIDGES

  I would like to know exactly what the printed test page is supposed to look like after a deep cleaning of the cartridge? is there a sample somewhere to watch? Thanks for any help

  Hello Sandlady22,
  Welcome to the Forums!

  I understand that you're looking for an example of a test page for your Deskjet 1051.

  Please see the link below which will show you examples.

  http://support.HP.com/us-en/document/c04190374

  I hope this helps.

  Thank you!

• Problem with HP photosmart more B210a CN216B of printer after you changed the cartridge

  Anyone know why the ink can not come through when I install a new ink cartridge?  I changed the that many times before, but it does not print.  I should shake the cartridge, moisten the place where the ink comes out, clean the print head and if so, how?  Any other suggestions?  Thank you

  Hello

  Click here for the steps to install a cartridge.

  If you did above correctly and the problem persists, perform the below mentioned steps...

  On the printer, press the Setup > TOOLS > CLEAN printhead

  Note: You may need to perform the steps mentioned above for 2 - 3 times.

  Now try to print, it should work.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• Pages of white or gray HP2545 impressions after cleaning and changing the ink

  Hello.

  Earlier, sometimes I have a problem with my printer.  I was an important analysis of the files and all of a sudden the printer stopped printing (I got only blank pages). So I thought that the ink has been used, so I changed it. Still nothing. So I cleaned the printer once, then the second. The test pages came without the letters, the colors are OK but the intense Black points on the test page are actually grey. I don't really know what I can do without giving the impression to the service. The printer is actually quite new, I think I bought it 2 months ago.

  Thanks for the responses,

  Kitsu.

  Hi Kitsune_San.

  If you purcahsed your printer 2 months ago it is still under warranty.  I suggest you contact the HP Support at 1-800-474-6836.  Otherwise, you might consider going to HP.com and search for the model number of the printer that you have.  There are usually a number of technical documents, manuals and subjects of support that might help you solve your problem.  In addition, it is a good diagnostic to print and scan diagnostic tool that can be useful.

  If one of these solves your problem, please update your post as solved so that others could benefit from this.

• Start A60 after cleaning of the ATI drivers problem

  Hi, as the vast part of PC Toshiba laptop with ATI card users installed, I had been experiencing problems with the "blue screen", "recurring loop." Look for example at http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9411&messageID=33486#33486

  I tried different approaches and managed to reduce it to crashing weekly or biweekly. I must have stopped improving, but has decided to never happen and found somewhere a radical solution: to wipe completely all traces of ATI drivers by some driver cleaner, restart and install brand new from ground zero. Well, he stopped boot at all. Normally, in 'the last working configuration', or 'safe mode '... It gives for an instant Windows logo glitters even more short with a blue screen and goes immediately to restart...

  Is there anything I can do about it without reinstalling Windows and losing my data?
  Thank you very much!

  Hi Dimitri

  Connect the HARD drive to the other PC (using the USB HDD) and try to copy all the data to the main PC.
  Replace the portable HARD drive and preinstall the operating system using the recovery media.

  On this way you will have own OS and save your time and nerves.

  Good bye

• DeskJet 6940 ink black smudges on page some time after the change of the cartridge

  Ink started smudges on the printed page, not immediately after I changed the cartridge ink, but after about 50 leaves.  Some leaves have small lines perpendicular to the printed lines as was ink on the rollers.

  I opened the printer and wipe excess ink above the bottom of the grey cables and off the coast of stainless steel rod that runs through the Interior.

  Someone at - it ideas?

  With our thanks

  Hello NHarchivist,

  I see this is your first visit with us on the HP Forums. Please, let me take a moment to say 'Welcome. '

  I hope you enjoy your experience!

   

  To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have some problems with the smears and streaks on the print-out.

  Please click the link which helps out ink drool or streaks.

  Please do not hesitate to write me again if you have any questions or concerns.

  If I don't get an answer from you today, I hope you have a fantastic weekend.

   

  See you soon,.

• HP Deskjet 1510: Printing can not see the characters in the text box

  my printer cannot print text but it prints the pictures ok

  Hi derrylahan,

  We will first determine if any black ink comes out of your printer.

  This document describes how to check the ink levels and how to print an alignment page.  You should check you have black ink in your cartridge and you should see black on the alignment page printing.

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/document/c03803074/

  If you do not see the black ink on the page, you should do a cleaning of the cartridge.

  If you still haven't black ink, you may have to replace the ink cartridge.

  Let me know how the printer performs on these alignment pages.  If black ink prints fine on this page, this indicates a problem with the selection of the driver or settings.

  Jean

• Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

  This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

  The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

  I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

  I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

  I hope this helps.

• HP Deskjet 3520: My HP Deskjet 3520 won't print black after replacing the cartridge

  I just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless).  It prints fine colour, but not black.  I tried to clean the print head, align the cartridges, check the intake on the cartridges.  I have also just opened another black cartridge, thinking maybe my new was defective.  So now, I've just lost a cartridge.

  so frustrated! My printer is more than a year now.  So not guaranteed.  When I click on the printer ink levels, he is grateful I have full cartridges - but is not printing in black at all.

  FYI, never heard of anyone in case HP. himself seems to have resolved the day after. Now my black ink cartridge works.

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I'

  Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I am using Lenovo y50... help me please

  The y50 Lenovo is a hybrid and that manufacturers are especially ThinkPads, I guess that Adobe sees it as such is why you get the phone display.

  However, you can delete the 5876 to get a view of the desktop and all do it muse site

  for example, the home page

  change the /phone/index.html to businesscatalyst.com/index.html to see the office... I suppect you forgot the slash so delete/phone phone not only

  Office ex = yourweb page | Home

• I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

  I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• Try reinstalling Dreamweaver CS6 on macbook after installed a cleaning of the macbook. Put in series

  Try reinstalling Dreamweaver CS6 on macbook after installed a cleaning of the macbook. Equip the serial No. Accepted. Then continues to come withMac message "Setup wants to make changes. Type your password to allow this. "Type correct password and it keeps repeating this same message. I know the password is correct as password does not wobble as it would if password is incorrect.

  This is the password of your mac.

  If it is not accepted, forgotten Mac password? How to reset your Mac password (with or without CD)

• HP 7510 quit black impression after replacing the cartridge

  My HP 7510 showed the message of low black ink - polygon.  Once replaced by the new black cartridge slowly disappeared to nothing and will not copy or print anything in black.  My colors will be printed again. There is no low ink message.

  Was able to find another post with a solution.  I cleaned the cartridge heads. Well, I thought that my husband had already done this.