HP 7510 quit black impression after replacing the cartridge

Similar Questions

• Photosmart 6515 does not print black ink after replaced the cartridge

  I am very frustrated! I can't get my Photosmart 6515 print black ink.

  Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

  I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

  I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

  I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

  What should I do to perform a partial reset or full?

  Hi Photokool,

  I understand that this has been a frustrating experience for you, and I want to help him.

  I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

  This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

  The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

  I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

  I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

  I hope this helps.

• HP Deskjet 3520: My HP Deskjet 3520 won't print black after replacing the cartridge

  I just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless).  It prints fine colour, but not black.  I tried to clean the print head, align the cartridges, check the intake on the cartridges.  I have also just opened another black cartridge, thinking maybe my new was defective.  So now, I've just lost a cartridge.

  so frustrated! My printer is more than a year now.  So not guaranteed.  When I click on the printer ink levels, he is grateful I have full cartridges - but is not printing in black at all.

  FYI, never heard of anyone in case HP. himself seems to have resolved the day after. Now my black ink cartridge works.

• OfficeJet 6310 tricolor cartridge (93/95) stops working after replacing the cartridge of black and white (92)

  OfficeJet 6310.  Brand new problem.  This morning my 92 black (right) went dry and as soon as I replaced it the printer said my tricolor is bad.  With the 95 the printer now shows "left cartridge needs to be replaced" and with the 93 the printer now shows "cartridge not intended for this printer."  There is no point at all.  Restarting, cleaning the contacts and heads, nothing seems to work. The cartridges are HP OEM fresh out of the blister, no refills.  I used the 93 both cartridges lights 95 alongside 92 black for a few years.  Foreigners have infected my printer.  Anyone have any ideas?  Someone two days ago posted basically the same problem with their so 5740 printer.

  Message edited by Frustration1029 on 12/09/2009 07:48

  1. remove all the cartridges and turn the printer off

  2 unplug the printer and wait a minute

  3 press and hold the # and 9 while plugging in the power cord from back in.

  4. wait a few seconds, and then press the power button.

  5. the display should read 'Full Reset to Null'

  6 only install the color cartridge.  Close the cover

  7. wait for the machine to ask for black cartridge, then open the cover and install black cartridge.

  8. close the lid

  9 alignment page be printed automatically.

• 2000 laptop... black screen after replacing the screen"

  I dropped the cell phone cracked screen, replaced the screen with a controlled with surgeons of the screen. Screen remains black, external monitor works. The brightness keys do not move the progress bar. All bars are gray. (assumes that the replacement is correct). Any suggestions?.

  Solved. I don't have a proper cable connection. All right.

• Photosmart c3150 check ink cartridge blink after replacing the cartridge

  Almost every time I have to replace a cartridge check ink cartridge blinking and I can not find anything wrong.

  If the led check cartridge blinking after changing a cartridge, then there is a document with steps to help solve this problem. The document can be accessed here.

  Hope this helps Richard.

• Does not print even after replacing the cartridges refilled with geniune ones.

  HP Officejet 8600 more all-in-one. Win 7 and 8.1

  We recently had some inkjet cartridges recharged at the shop [personal information deleted]
  Overland Park Kansas. They worked for a few days then our printer started to show error messages. Since then, we replaced each cartridge with a brand new black cartridge genuine HP, but our printer no longer works. I was wondering what kind of recourse do we have. We were happy with Costco over the years, but we hope that we don't end up having to buy a new printer. We also provide this letter to HP to see what options we have. Thank your for your quick response.

  Thanks for the information. "With this error, I suggest following the actions suggested in this troubleshooting guide: "Printer failure"Message may include a ' 0x610000f6" or "0x61xxxxxx" error Code appears on the printer.

  Since your error has an error code, you want to follow the second option in the document. I would like to know what are the results with as many details as possible.

• Problems after replacing the cartridge

  Hello

  I have a problem with my all-in-one HP Photosmart C3180. Recently, I replaced the black cartridge with a new one and now I can't print or copy more because it shows a problem with the cartridge three colors (it has not been replaced).

  What happens is that the red error led and the led (the one near the color copy button) color cartridge still flashing. It does not accept any input print and everytime I turn on the printer it will begin what is called "align cartridge" (printing paper with a few lines on this subject).

  Is that what I can do in addition to the replacement of the two cartridges at the same time? I never had this problem before.

  Thank you for your time,

  Alin.

  Hello, AXN

  Unfortunately, you must have the color cartridge to print. I noticed that some printers can still use the scanner if you also need that. You can always try, but it might give an error when you try to print.

  Let me know if the replacement cartridge solves your problem.

• Ink level still shows low after replacing the cartridge in OfficeJet Pro L7680

  88XL black cartridge replaced, still shows low ink but prints out OK.

  Travis_C wrote:

  Hello pikespeakbob

  Did you use XL cartridges in your printer before? According to this article it may simply not be read correctly. I had read the article below, even if that shows a different number of ink.

  The ink low message

  My bad!

  At first I thought it might be the 'electronic device' on the cartridge that was at fault but when I rechecked it against the cartridge I replaced it smelled a bit of light.  I weighed both cartridges on a postal scale and they weighed the oz in 1.9.  It turns out that it was also a used cartridge should I have placed in a container cardboard new cartridge so I thought it was new.  I even found the date that I had written on the cartridge when I initially installed, should have looked more closely.  Detective Conan.

  Thanks for the reply.

• Will not print black after replacing the black ink tank

  After replacing the black ink tank, the printer does not print black data (text or graphic).  I ran printing HP and scan doctor utility and printed assessment page.  The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.

  Printer:

  HP Officejet 6000 E609n

  Thanks in advance for any help

  OK because that is a thing of warranty which may be worth dip the printhead as described below...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

  Recently, I messed up my CPU and bought a replacement (exact same kind). I am running windows 7 ultimate and for about 6 months prerequisites with no problems. After replacing the CPU I get intermittent lock ups, sometimes with a small portion of the screen flashes. I say intermittent but at least every 15-20 minutes. Different programs, different habits, but still the screen freezes.

  I went in and deleted the driver under graphics cards, pick a 'completely remove the option' - it after restarting the system on its own charged for a Standard VGA Graphics Adapter and since there is then no more accidents. Of course the functionality is not as complete, large icons and such, but it works.

  If it certainly seems to point to a driver conflict I think. But for this machine, is there ever any single Vista Windows 7 driver. My skills are not so, but I'm moving.

  Any guidance?

  Hello

  Yes, your PC has integrated graphics controller: ATI Radeon XPress 200, we don't find drivers compatible Windows 7 ATI.

  The BEST OPTION: Buy a video card, then insert it into slot PCI Express 16 on the motherboard to better display and multimedia performance with Windows 7 to a value using else, it looks just like Windows XP