HP Deskjet D1520: HP Deskjet 1520 2753 error code

Hi have Windows 8.1 and I tried to install an old CD Rom for my HP Deskjet 1520. Unfortunately, the CD Rom is only for Windows XP, Vista (verson 10.0.0).  So my current computer does not support it.  (I don't know if I have 32-bit or 64-bit). When I try to down load HP Printer driver vor D1520 I get the error message 2753.  I looked at what I had about this error and it "still does not."  Any suggestions?  Thank you

Hello

Try following steps tese and check to see if that can help you:

1. click on the icon of the computer to open the file Explorer

Tags: HP Printers

Similar Questions

  • HP Deskjet 2640 series: Error Code

    Dear Sirs,

    I was faced with a problem with my all in one printer HP Deskjet 2640. Specifically, the printer suddenly showed an indication of error on the screen and refuses to print, reset or accept all orders by the laptop. The error code displayed is as follows:

    Error code

    OXC4EB11C9

    C HW_MICCI2

    As there is no indication of the error category (i.e. ink, cartridge printer software drivers etc, I am unable to determine the source of the problem. I would be grateful if you could throw some light on this subject.

    Thanking you in advance

    Hello emandal,

    Welcome to the HP Forums.

    I see that you have a problem with the error code "OXC4EB11C9".

    Please click on the following link which deals with HP monofunctional and printers multifunctional - an alphanumeric Code (' example: ' 0 x ' r 'C2...) ") displays on the front panel when printing.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

  • List HP DeskJet 930C printer error codes?

    Hello, where can I get a list of the error codes printer´s HP DeskJet 930C printed on the page of diagnosis and their significance? As 90020302 etc.

    To answer your question regarding the list of error on a diagnostic test codes, I have never seen a list and I'm looking for very long.  To my knowledge, the diagnostic report means more to engineers.  Usually, each digit represents certain aspects of the trial.  If you have problems with the printer or are you just trying to understand the test page printed off the coast?

  • HP Deskjet 3052 has error code...

    I tried to stop my printer from the other day, and it took a minute or two, compared to the second 5 regular one. He finally gave me this: "Error Code OXB022B902" I do not know if some of the zeros are supposed to be the "o" or the other way, but I would like to know what this code, like what has gone wrong. Thank you!

    Hi Dakota5525,

    I understand that your printer has an alphanumeric error code.   A code alphanumeric error means that your printer has a hardware problem.

    I'll take a look at the document below.

    Alphanumeric error

    Let me know how it goes.

  • HP Deskjet 3059A: 0XB807A80C error code

    I get an error code 0XB807A80C on the screen of the printer. I read that it could be in trouble with the printinghead. The printingheads are cartridges, or not? The main question is: is this repairable? and how?

    I only use original cartridges.

    Thank you

    Reference:

    http://support.HP.com/us-en/document/c01458034

    Also this thread:

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

  • 2753 error code when you try to install programs

    I have vista and I get an internal error code 2753 whenever I have try and install anything, how can I solve this problem?

    I have vista and I get an internal error code 2753 whenever I have try and install anything, how can I solve this problem?

    Hey jenn22c

    see if the information below helps you

    http://www.ehow.com/how_5047270_fix-internal-error.html

    Walter, the time zone traveller

  • 2753 error code when you try to uninstall microsoft silverlight

    not had this problem before with netflix watch, but now I get this screen to download microsoft silverlight, but it's already installed netflix customer said to uninstall the old microsoft silverlight, but I get this error code 2753

    How to clean a facility damaged Silverlight and then reinstall Silverlight

  • Cannot install lightroom 3.6 2753 error code

    Had problems with my computer today (windows 7 64 bit) has finally managed to get a restore point which would access the machine windows and all programs (including Photoshop CS5) did not work except lightroom 3.6. I was not able to have the Windows Installer UN remove lightroom, so I had to go and do it manually. I downloaded another copy of Adobe. When I try to install, I get the error code 2753. The file Lightroom.exe is not marked for installation. I checked the FAQ and it there was only one reference to this code, but it refers to the installation of the lightroom 2.0 software. I have re-installed lightroom 2.6 without any problem and I tried to install the 3.6 software after installation of version 2.6. I had no chance to get the error code 2753.  When I installed initially version 3.6 on 12/4 there is no questions and software worked without any problems. Any ideas / suggestions? Thank you.

    Hello Jeff, thanks for the reply. What happened was when I was working inside one of these balloon messages popped up by the remark of a hardware driver does not Lightroom or missing, I really did not pay attention to be honest, I thought that it could have something to do with the download of files on the card compact flash. After you download the files in lightroom, I turned off the machine. Later, when I came back to work on the files of the machine wouldn't boot into windows 7 instead a kind of chkdsk utility launched, after he finished to check the disc, it gave me the opportunity to go to a previous restore point, the first time, that he did not. On the second try with a different restore point selected, I was able to raise Windows. Everything worked except for the lightroom software. After execution of Registry Reviver and also optimize the registry I still was unable to get lightroom to work.

    I decided to download another copy and re-install. Well the first problem encountered was not able to uninstall the software from the Control Panel utility so I tried to install the software without the old software is removed, this is the first time I got the error code 2753. I checked adobe.com FAQ page and the only mention about this code was referring to the version 2.X. I tried the procedures it anyway. Still without success with the error code 2753 yet to come. I then decided to remove the software manually from the computer (Windows only, not going through BACK or regedit). Yet once, I ran Software Registry Reviver and tried to install the software again without success yet.

    Finally, I decided to google the error code 2753 and consider what was actually happening. Part of the instructions to clear the code required me to download some software that microsoft created (msicuu2) that would force remove the software lightroom on my machine (it was still showing in the control panel uninstall even if I took it from the program file in windows). Once again, I have run Registry Reviver and optimized the registry, rebooted the machine gave him another chance and this time I got success.

    I am pleased to announce that Lightroom works without any problem. I can't say with certainty what caused the problem initially for all I know it could just be a case of syndrome of HS.

    I have taken note of your response about the stability, I'll pay more attention for now to see if there is a repeat of this unit or a similar problem and then address it right here. I would like to mention that I did not lose all the photo files or have files corrupted due to this problem... so I think a windows problem that you referred to in your answer that it is a problem of Lightroom.

  • hp deskjet 3050 0x805d0700 error code

    The printer started to display the "Paper jam" message, follow the steps described by HP to make sure that the paper jam is solved, and nothing has worked. Now it seems it won't even turn on.

    Very frustrated! Help, please. Thank you

    Hi MeesterStewart,

    See the following documents below and let me know if you still have the problem?

    http://support.HP.com/us-en/document/c02130018

    http://support.HP.com/us-en/document/c02200770

  • HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

    At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

    Have research all day but unable to know what means this error code.

    Hi @e-year-e.

    Thanks for joining the Forums of HP Support for a solution to your printer problem.

    I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

    These error codes are caused by hardware or firmware issues.

    "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • HP Deskjet 3056 A does not: 0xc7390500 HW_BARACUS_HEA error code

    HP Deskjet 3056 A windows 7 64-bit wireless configuration

    Do not answer and this displays on his screen.

    0xc7390500 HW_BARACUS_HEA error code

    I bought this black and finally installation Friday in our new apartment. Settled and a test page printed, all very well, even a sodoku puzzle. Really impressed me here.  Left work in the other room, later my fiance has continued to visit him, and this mistake was on his screen. for the past 2 weeks I did my best to figure out how to solve.  All programs support and stuff do not help, says they can not connect to the printer. Hooking up to usb allows it to be recognized but do not operate.  Unplug / vile the power button and it will boot fine, and after a second idea, it appears.

    I don't want to whimp out and return immediately. but my patience has been tested...

    These codes 0 x normally indicate an internal hardware error state in the printer.  The software of the printer is not link to the printer correctly, right now, is because the printer is in an error state.

    There is a document to solve the codes of x 0 in printer Deskjet 3056 has found here.

    I hope this helps.

  • HP DESKJET INK ADVANATAGE 3545: error message in my hp deskjet ink advantage 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

    Hello

    HOW TO GET THE SOLUTION FOR THE ERROR ON MY HP DESKJET 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

    Hello

    Please try the steps below...

    1. While the printer is on, remove the cartridges.
    2. Remove all sheets in the tray. Close the drawer.
    3. While the printer turned on, unplug the power cord from the back of the printer.
    4. Power Off the Wireless router.
    5. Wait 60 seconds.
    6. Plug the power cord of the printer.
    7. When you are prompted, install the cartridges.
    8. If the error persists, then it is a printer failure. Please call HP Tech Support for assistance.

    Support of HP technology (USA) 1-800-474-6836

  • 0x00729c98 on the HP Deskjet 3050 all-in-One error code

    I just got my Deskjet 3050 last summer, and now it gives me this error code (0x00729c98) whenever I turn it on. Turn onto the property and made a few noises whirring as it adapts, so the two ink cartridge brand orange flash as the exclamation mark next to the screen on the printer. The only thing that the printer display the error code and the only way I was able to turn off is to unplug. I'm in College so I really need my printer to the random things at least twice a week. Anyone have any ideas?

    I had the same problem and called. They told me it was a hardware problem and it cannot be resolved. They said that if you are in warranty, they may be able to replace it, but mine wasn't while they just offered to buy new.

  • Hp deskjet 1660 printing error after "installed being successfully" on my computer

    my hp deskjet series of 1660 is "installed successfully" according to my computer, however, when I try to print a test page, the print queue says under the status "printing - error".

    Hi MattParsons,

    1. What is the full error message you get?

    2. you receive with the message error codes?

    You can try to run the printer Troubleshooter and check:

    Printer in Windows problems

    You can also consult the following link:

    Solve printer problems

    Hope this information is useful.

  • HP Deskjet printer 3052 J611 series, 0XB022B902 error code

    I tried to print something and I thought it was better to turn off the printer and turn it back on (since my computer says that it is offline at the time) when I was there ' off, he gave me this error code. I could not find in the Ant so if someone reads it, does that mean?

    Hi @Neonas,

    Welcome to the HP Support forum.

    I understand that your computer Windows 10 said that your printer HP Deskjet 3052 a e-all-in-one printer has been disconnected, so you were restarted, and when you were there ' turn off display as the "0XB022B902 error code. I would like to help with that.

    Error "0 x" can be caused by several different things.

    I would start by ensuring the printer and in particular the transport path is free of obstructions or the jammed paper. Here is a document that can serve as a reference if necessary - the "paper jam" Message at appears to e-all-in-one printer, HP Deskjet 3050 printer.

    "If the printer is free of all jams follow this document to see if the '0 x' error can be solved - ' 0xc19a0005" or similar error.

    I hope that you are able to clear the error code '0 x '. If it is turned off and the printer still appears as offline on your computer, follow this document - printer does not maintain the wireless connection.

    Please let me know if that solves the problem, or if you need assistance.

    In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

Maybe you are looking for