HP Deskjet F4180 ceased to print

Similar Questions

• DeskJet 3070 ceased to print a few days after replacing the black print cartridge

  Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

  But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

  The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

  I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

  Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

  Please help me.

  New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

  I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

  Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

  Thank you HP.

• DeskJet 5552 ceased to print. Eventually after MS Windows in November 2012.

  Printing process seems in good condition until the paper is in place for printing and recognition of paper light lights up - but rejects the paper that is quickly sent to the status bar 'out '.

  Using Windows XP with parallel port connection. Have made windows restore to correct date. Have crossed all diagnostic tests (including the change of automatic paper type) several times and reinstalled the original software and tried too many downloaded HP software.  Printer will not print the test page when the software reinstalled - marked-up page is rejected

  Help, please!  Thank you very much

  I recommend trying another driver. Here's a thread on how to allocate one of those. If you can't find the 990 c driver, I also recommend the Deskjet 9800.

  http://goo.GL/6WVSG

  I would like to know how it goes!

• DeskJet F4180 does not print color?

  It would not print in color; I checked the settings of the printer.  I did a scan alignment.  I did a test of color.  I went and bought the new cartridge.  Does not print color.   Black prints fine, clear

  help my son has a project for school in the morning

  Thank you

  There is a document on colors missing or faded print quality issues. The document can be accessed here.

  I hope this helps.

• Impossible to copy and scan on all-in-one printer, HP Deskjet F4180.

  I can't make a copy and scan on the surface of the glass of my printer HP deskjet F4180 all-in-one. The printer says: error in the copy menu and seeing red flashes on color and black. However, I am able to print from my laptop and a pop-up message would be in my laptop showing the ink cartridges (black and color) are placed incorrectly. Check the ink cartridges, both are in their right place and broken up. Need help... Please.

  I found this document which decodes what mean flashing lights.  There are a lot of different codes described, but I found a heading "question: one or two of the lights blink check print cartridge" which seems to be what's going on your printer.  Basically it's saying that the cartridges are out of alignment or defective.  If the document is not help clarify, let me know and I'll see what I can find.

• HP Deskjet F4180 print photos with a purple hue across

  Hi all, I was hoping that someone can help me. Our HP Deskjet F4180 is printing pictures with a purple tint (usually something in, like a coffee table or wood panelling, comes out magenta-y).

  I tried troubleshooting it myself and it seems there is no problem with the printer cartridge, or the program that I am printing.

  Here is what I tried:

  -current color cartridge replacement with a new one; problem persists

  -cleaning of the cartridge through the HP Solution Center (he asked me to clean, then intermediate clean, then first; tried all three, and the problem still persists)

  -print the photo of Microsoft Office Picture Manager and Microsoft Word

  -change the color balance (I value Magenta - 25; still did not help)

  This problem started after I printed 60 wine labels, which all had purple graphic and black text on them... but I think a lot of printing of purple would cause the printer having less purple coming out, no more...

  Any ideas what the problem may be? I have included a link below to the images show what that is the problem - the first image is how the picture should look like, the second is an analysis of the image printed super-purply (which, moreover, is printed on ordinary printer paper white old).

  http://S1044.Photobucket.com/albums/b447/cappa_j/HP%20Deskjet%20F4180%20error/

  Hi Ciara B,

  I had the intention to get back to you with some comments - thanks for your help! I tried the last steps, you suggested, except to repair, which is what I wanted to avoid .

  I found a solution to the problem though - I completely uninstalled the printer from my computer, then insta. Ed again and it works perfectly! Don't know what the problem is, but reinstall all fixed.

  Thanks again!

• HP Deskjet F4180 prints very, very slowly. -one line about every 15 seconds.

  Product name & number: HP Deskjet F4180

  Operating system: Windows 7 64-bit

  no error message

  No changes were made to the system

  No problem.

• install hp deskjet F4180

  I use Deskjet F4180 2 years with W7.

  The week last W7 has been updated with heavy upgrades.

  Since then the scanner HP F4180 did not work.

  I tried to uninstall and reinstall the driver (downloaded from the HP site), but I got the message "Cannot access the system registry key" - register HKEY_LOCAL MACHIN\SYSTEM

  My system has now no printer and scanner and I do not know how to proceed.

  Hi marcosogliani,

  Thank you for sending me the results in the product Monograph.

  Sorry test registry and to rerun the installation as that administrator does not solve the problem.

  The question is releated full administrator rights on the computer.

  Create a new user account to see if that is causing the problem.

  Create a user account.

  Then follow the steps described in this document.

  Windows: A 'fatal error' Message is displayed on the computer to 96% of the Installation of the HP software.

  Do not take into account the title.

  Go to Solution 2: change the Hard Drive parameters of security, step two, three and four.

  Try to run the installation again.

  It's in an office or at home?

  You have a COMPUTER service? (make them check the permissions on this computer)

  Thank you.

• I can't install the driver for Deskjet F4180 with Yosemite

  Hello

  I try to install my Deskjet F4180 on Yosemite following instructions in http://support.hp.com/us-en/document/c04488851 but when I plug in usb print queue is not created automatically and the printer software is not installed automatically.

  Then I try clicking + option and I get the answer, you can see in the picture: there is no software available for this printer in Apple. Get in touch with the manufacturer of the printer...

  

  If I drop the list next to the Option "use":

  

  Can you help me please?

  Thank you

  Ok

  Try to install the software manually and check to see if that can help you:

  First, fix the permissions of the drive to avoid any possible problem:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Now, download and install the package below, try chicken add the printer again:

  http://support.Apple.com/kb/dl907

  Shlomi

• F4180 do not print in color (even if it does not print in color test page)

  Whenever I try to print anything from a Web page or save the file, it only prints in black and white. I did the color test page (holding the button cancel and hit then start color copy), and the colors printed correctly.

  I always see color/black and white of preferences and make sure the color is selected. It continues to print only in black and white so.

  Welcome to the Forums of HP redwing634,

  I read your message which indicates that the printer does not print in color from the computer, but it will print the color on the material test page. I can help you with this.

  Try the following steps to see if it will solve the problem.

  More troubleshooting when the self-test Page has no flaws.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically.

  Find and fix common printer problems using the HP for Windows diagnostic tools?

  Try printing the paint to see if you have the same results. How to use Microsoft Paint.

  If you are still not able to print in color, the pilot may have been damaged. I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP Deskjet F4180 all-in-One Printer Drivers.

  Select your operating system, click Next and click on the software to download and install.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• Driver software Deskjet f4180 not install on windows 8.1

  Hello! I bought a computer hp laptop spectrum x 2 and tried to connect my old deskjet f4180 all-in-one printer. The computer recognizes the printer, but says that the drivers are not installed. I tried to install the drivers of hp:

  Hello Tmontonen

  You can download on this site https://www.sendspace.com/and just copy and paste the link to the file to your message.

  If you don't want the message to be seen by anyone, you can just PM me the link, and I'll look into it.

• HP deskjet 5150 - failure sudden print under Windows 7

  I've been running a printer HP Deskjet 5150 with Windows 7 for two years now without a problem (and for several years before in XP). Suddenly, it ceased to print from my desktop computer but continues to work away happily from my laptop (which is still running on XP).  When I select a file to print from office model, the printer comes to life (lights flashing etc.) but nothing is displayed. On the Control Panel, it says that it is there no ducuments in the queue.  I reloaded the driver etc. and used installation HP doctor, but all without result: none can detect defects.  But in trying different routes of troubleshooting, I find that the "Print test Page" function works as long as necessary the office, then it seems that nothing wrong with the printer functionally.   (But "print test page" in the installation of doctor HP is not working!)

  I saw only two error messages: once I got an error message that read something like "this program has encountered an error and is unable to act" and a second, some time later, said "cannot print scripts on this page.  They lead me to suspect that the problem lies somewhere with the Windows software.  The firewall in use is BitDefender, but disable this does not solve the problem.  Can anyone help?

  Sand Piper, to start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

   

• HP DESKJET INK ADVANTAGE 1515: To connect the HP DESKJET INK ADVANTAGE 1515 printer device to multiple computers.

  Mr President, I have HP DESKJET INK ADVANTAGE 1515 PRINTER I want to connect to my two computers with all FIRST Windows XP and the second having Windows 7 operating systems. Kindly help me to do this in detail...  THANKS IN ADVANCE

  What's your plan for the connection?   It is a USB printer only, no network connection.  You can connect to a computer and then enable Microsoft File and print sharing on both computers.   Or if your router has a USB port that supports printers CAN operate when connected there.

  Those are your options.

• HP Deskjet 1112: HP Deskjet 1112 does not print

  Recently, I bought a HP Deskjet 1112. It prints very irregular and I can't seem to understand the problem.
  
  Here's what I've tried so far:
  
  (1) turning and turn on the printer
  (2) turn the system off and on again spooler (using Windows + R, typing in services.msc, turn off the spooler, then by disabling the that and turn it back on)
  (3) uninstall and reinstall the software (this is what the printer Troubleshooter told me to do)
  
  The convenience store told me that is missing a driver, and he also says that the printer and the computer communicate well. I wonder if it is a question of rope? In addition, I do not know what a driver is so I don't know how to check if it is operational.
  
  Help, please. I'm running out of ideas for now thanks in advance!

  Hello @humblebee,

  Thank you for showing your interest in the HP Forums! I see you have printing problems constantly. I would like to help.

  Try the following steps to see if they will solve this problem: printer is offline (Windows).

  If you still have trouble, let me know the results of printing and scanning doctor.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• DeskJet 3520: Unable to print the map of wedding stationery

  I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?

  Thank you

  @Djinnie

  Printer:

  E-all-in-one printers HP Deskjet 3520

  The printer specificationsincludes a list of the weight allowed for various documents:

  Status bar	Type	Weight	Capacity (depending on the weight of the paper)
  Feeder	Paper	64 to 90 g/m² (16 to 24 lb)	Up to 80 sheets
  Envelopes	75 to 90 g/m² (20 to 24 lb)	Up to 5
  Index cards	Up to 200 g/m² (110 lb index maximum)	Up to 20 or 40
  Photo paper	Up to 280 g/m² (75 lb)	Up to 30
  Output tray	Paper	n/a	Up to 15
  Envelopes	Up to 5
  Index cards	Up to 10
  Photo paper	Up to 10

  "Medium stock paper / card.

  Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.

  "Very heavy weight paper / card stock.

  You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.

  Reference:

  Printing options

  Comment

  In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.

  You can provide the staff of print service with a sample of your message that is printed on plain paper.  This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.

  Why use a printing Service?

  • This printer also beautiful be, isn't able to print invitations from the way you expect.
  • The invitations are likely to be expensive and perhaps not easily replaceable.
  • The test phase may exceed the number of invitations you want to risk.

  If you do, you could remove this in your list of items "I do" and entrusts the care professionals.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.