DeskJet 5552 ceased to print. Eventually after MS Windows in November 2012.

Similar Questions

• PSC 2355 all in one printing stopped after upgrade windows 8.1 scan is OK.

  I have a HP psc2355 printer worked happliy in window 8. I downloaded and installed windows store 8.1 and the printer no longer works!

  With the printer Open (via Control Panel) status window, the details of the document briefly appear when you click the button print. Nothing happens at the end of the printer. Theres nothing wrong with the printer as I can use it on another PC without problem.

  I uninstalled and reinstalled the printer using hppiw 2012-10-31 and the HP print and Scan Doctor V 4.1.0.29 which gives an error in device "your printer is in a busy state" after an attempt is made to print from applications or properties of the printer/print test page.

  that self-test prints OK.

  Scanner works OK

  Printer is connected via rirectly USB cable to the USB port on the PC

  Windows Update ran this morning

  3 hours lost so far!

  SOLVED * printer properties Advanced tab Print Processor change Print Processor to winprint hpzpplhn settings check the default data type is RAW print OK now HP has gotten support jobs going?

• printer problems after installing Windows 8.1

  HP officejet 6110 do not print afer 8.1 Windows installation... HP support website has no drivers for this printer to download... anyone have any suggestions?

  Hello

  A basic set opf driver is already included in Windows 8.1.

  Follow these steps to install the printer on your PC:

  http://support.HP.com/us-en/product/HP-OfficeJet-6100-all-in-one-printer-series/79476/model/79478/document/c01796879/

  If you have any questions follow the frequently asked questions section.

  Shlomi

• DeskJet 3070 ceased to print a few days after replacing the black print cartridge

  Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

  But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

  The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

  I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

  Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

  Please help me.

  New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

  I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

  Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

  Thank you HP.

• HP Deskjet 3520: My HP Deskjet 3520 won't print black after replacing the cartridge

  I just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless).  It prints fine colour, but not black.  I tried to clean the print head, align the cartridges, check the intake on the cartridges.  I have also just opened another black cartridge, thinking maybe my new was defective.  So now, I've just lost a cartridge.

  so frustrated! My printer is more than a year now.  So not guaranteed.  When I click on the printer ink levels, he is grateful I have full cartridges - but is not printing in black at all.

  FYI, never heard of anyone in case HP. himself seems to have resolved the day after. Now my black ink cartridge works.

• HP Deskjet F4180 ceased to print

  Original title: My HP Deskjet F4180 stopped printing, why? New ink!

  My HP Deskjet F4180 printer stopped printing lately. Since last week, he stopped

  printing for unknown reason. I put new ink cartridge, yet. Plugged and unplugged, checked all

  the instructions in the help, but it just does not print. Notepad does not either print. Why?

  Please help; I'm desperate!

  Hello

  (1) what exactly happens when you try to print?

  (2) you get any error message?

  (3) what operating system is installed on the computer?

  I would say to you to follow the steps provided and an update on the State of the question.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  HP Deskjet F4180 all-in - One Printer Troubleshooting: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&dlc=en&lc=en&product=3177566

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• HP LaserJet P2035n: HP 2035n ceases to printing/answer after installing the new toner

  Hi, I work for a School District, we have several of these printers and recently had this problem on 2 machines. Problem is that the printer is completely insensitive after installing a new toner real HP 05a.

  Install toner turn printer on, it passes through the light initialization sequence and shows ready, will not print a test page for the PC, will not print a page of the control panel of the printer configuration, will not be recognized through its USB connection (PC gives same message the USB is damaged or defective), does not pick up an IP address and is not accessible via the Web console.

  Turn the printer off and reinstall the old toner put under tension and everything works again, USB is recognized and system installs the drivers, accessible via the Web console, prints the config to the PC and the control panel of the printer. I have 3 used toners and all three will work with both printers, I have 2 new toners and the two do not work in the printer. Thanks for playing.

  I saw a few client computers and forums on other sites about this issue defective chips on the cartridges-back them and replacements should be good.

• OfficeJet Pro 8100: Lost my printer drivers (after a Windows 10 update)!

  Hello

  After the recent Windows 10 updates (one installed on Christmas day), I lost my (custom installed) to the printer drivers. No big deal I thought, ONLY MIcrosoft MOST inconvienience - I'll reinstall just them. But when I open the properties of the printer Panel, I found that ALL ADVANCED TAB where I needed access to reinstall drivers is now GRAY and completely unaccessable! I not only lost my custom drivers, I also lost my second tray of the printer (installed optionally) capacity! YES, MERRY CHRISTMAS!

  Now I need help to reinstall (they gave me specific instructions for installation, so I won't bumble worse trying to install them differently (as a regular driver) without confirmation first.)
  This is a PERFECT EXAMPLE of why we should be allowed to choose for outselves when and what updates to install on OUR computer! I checked the Windows Update history and there is NOTHING there that would strike even he would have had to change printer drivers, nor I anthing that would affect them being changed (for example, allowing control HP from my PC to automatically updated drivers), but clearly something changted them.

  What I HAD... I use a printer Officejet Pro 8100 bought two years ago February next with the option second tray of the installed printer. I also use Officejet 8600 drivers in order to be able to print my graphic files properly (these drivers were recommended on this forum once I have posted having problems printing after the first installation. These drivers worked PERFECTLY in all of my PC (running Windows XP, 8.1, and 10), but now with the missing options, everytting is printing through the upper status bar (where I have a THICK paper). I don't have the ability to choose which try to print (Tray 1 or 2), and I need to change paper whenever I want to print on different paper (I always had a THICK paper on top (Tray 1) and plain paper in the lower part (tray 2) because it would not print thick paper from the tray at the bottom.

  To use the 8600 drivers, I was given specific instructions (on this forum) on install in the section "NEW DRIVER" of the ADVANCED TAB in the properties of the printer. Now that I don't have access to this tab, I need to know if there is a way to access new (my preferred method) OR another way to install (for example just install them as if I would install the printer (8600))?

  It's free enough explainatory tab FULL area is GRAYED OUT, but in case there are any doubts, I have attached is a screenshot showing what he looks like.

  I apprecate any help you could offer.

  Kind regards... Chugbug

  

  OK, now it's really WEID!

  I tried during the last 24 hours to get to the Panel in question, including the restart of Windows at least half a dozen times without success.  But now tonight after that I dug around the different tabs, once again, INCLUDING clicking on through security and permissions panels (but not to make changes) AND for posting my question here, all in the advanced Panel was suddenly accessible once more!

  I reinstalled my 8600 drivers again, then reset my printing (default) preferences (paper 2 / plain plateau), and everything is good again (kumbaya...)!

  Good thing, I took a screenshot of it (grey) or I can't believe myself!

  Happy holidays!  Chugbug

  Screenshot showing access with my 8600 drivers installed:

  

• No software available for HP Deskjet 2050 All-- One Printer - J510 in in windows 8.

  Product: Printer all-in-one HP Deskjet 2050 - J510

  Operating system: WINDOWS 8

  Problem: Software for windows 8 was not available on the HP site and the software CD is in error.

  Error message: Corrections system.

  Changes to the system: My operating system is already upgraded to latest OS or Windows 8 windows. It's the HP which has still not being upgraded its software for window8.

  Hi prateek1science,

  Refer to the following thread

• Printer disappeared after installing Windows SP3

  I have no printer listed now.  I tried to go thru administrative "Printer Spooler" in the system - nothing has worked.

  I get an error "1068", which I can't find something on.  Help!

  I'm sorry. I use Windows XP 2000.

• No sound after installing windows 10 MBP 2012

  Hello world

  Here's what I did.

  I have MBP 2012 with El Capitan on it.

  I installed windows on this 10. Here are the steps I followed.

  1. Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
  2. ISO file 10 Windows installed
  3. Make a key USB bootable but Bootcamp with drivers
  4. Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
  5. Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
  6. Installed Windows and driver loaded by installing bootcamp
  7. Everything works fine but the sound

  Tried, but failed

  1. Clean install of windows if partition bootcamp (error - no found boot device)
  2. Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
  3. Tried the update of drivers for the sound. However, did not

  Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.

  Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.

• Epson 830 xp print driver does not (Windows 7-32 bit)

  Last week, I bought a new printer multifunction Epson XP-830.  I have used Epson before without problem.  Can't get the driver to load.  Has been able to load the scanner software.  Driver is not displayed.  I think that the computer sees the right printer cannot find a driver that loads.  I loaded the driver for the Epson web site.  The drive, they sent me will not read in my drive.  I spent a lot of time on the phone with Epson troubleshooting - in the end, he said to call Microsoft... I feel I'll send this printer back.  I have disable check verification in the wind, it was an unsigned driver.  When I ran windows update - the 830 do not show upward well that several other models of xp has.  There was a generic of the 800 series and I tried this - it loaded - but it did not work.  Very frustrated.

  Sharon

  The symptoms you describe its pretty strange.  You may be correct that the unit you received is defective.

  Recently, I have not run Windows Update to update the list of printer drivers on my Win 7 system, so I do not have drivers from the Epson XP series on this system.  However, looking at the Windows Update Catalog indicates you're right: there are drivers there for XP - 800 series, XP-810 series and XP-850 series printers (as well as upper and lower XP series), but not XP-830.  Here is what I expected appear in the list of drivers when you use the "Add a printer" Wizard after running Windows Update.

  However, Epson has an available for download driver for XP-830.  Have you downloaded the printer driver or you downloaded the "drivers and utilities Combo Package Installer?

  For Windows 7 32-bit, you downloaded epson16387.exe (combo package installer) or epson16463.exe (driver only).  What file did you, in fact, download?

  Also bizarre is your statement that ' the disk they sent me won't play in my player. "

  • Wasn't there a CD supplied with the printer?  If there was, what happened when you tried to use it?
  • What exactly happens when you insert the CD they you sent in your drive?

  The first time you tried to install the printer, if using the CD supplied with your printer or otherwise, did you make sure that the printer was NOT connected to the computer until the next DAY, the software has been installed?

  At this point, you have all the printers installed on this computer?  In other words, if you click on the round to start and go to devices and printers, which icons appear, in the category 'Printers and faxes' or in the category "not specified"?

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.

• Printer HP Deskjet 3050 a hesitate because long after command to print

  Printer HP Deskjet 3050 a hesitate because long after command to print.  How to fix this?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.