HP Deskjet F4280 does not!

Similar Questions

• HP deskjet f4280 does not scan on MacBook Pro Mid 2010 (MacBookPro7, 1).

  Hello!

  I have a hp deskjet f4280 and when I try to scan from my MacBook Pro Mid 2010 (MacBookPro7, 1) the scanner and image capture app froze... I was watching the issue closely, and I think that it is due to a problem with the "HPscanner.app" when he's not on the preview, it freezes and State to 99.8% of the CPU usage...

  The problem is that in this computer. I have another mac, MacBookPro8, 2, and it scans properly and without any problems.

  Any idea?

  PS / else and if anyone is wondering... I have the latest version of the drivers.

  Thank you for your proposal!

  I finally comes to enter in safe mode to check if it I could scan. It scan Scanner normally. When I restarted the machine, it does not freeze over.

  Thanks anyway. I'll keep your solution where the question arises again.

  

• HP Deskjet J110: 8.1 for Windows does not recognize Deskjet J110, does not print. Drive of reloads.

  DeskJet J110 does not test page print.  Removed the printer and reinstall, USb not recognized. Charges such as LPT1. Tried unplugging, reboot and reconnect. Same result.

  Hello Floadnar,

  Have you tried with another Usb cable? DC said that "usb not recognized it. You should check also Device Manager for universal serial bus drivers. Finally, you can try to connect both usb cable to check the work of regular printer usb socket or not. you don't need to install the driver. Simply connect the usb cable between the printer and PC. If both USB works with off problem that should not see the unrecognized Usb device message.

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• HP deskjet 995ck does not work on win 7

  HP deskjet 995ck does not work on win 7

  Check on the Web site of the manufacturer for an updated driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=JM&LC=en&DLC=en&softwareitem=DJ-14681-2

• HP Deskjet 990cxi does not print color

  HP Deskjet 990cxi had for many years with no problems.  Once the color has begun to come out in pink, I replaced the cartridge from the printer and now it does not print in black and faded rose.  I replaced the cartridge with an another new and still the same results.

  Can someone help and let me know what I need to do?

  Hello LoBaan,

  Welcome to the Forums of HP Support! I see that you are not able to print in color on your HP Deskjet 990cxi, you replaced the cartridges without success. I would like that you start here: lack of color, wrong color or cast in print, follow these steps to resolve the problem you are experiencing.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Printer HP Deskjet 3525 does not connrct wireless without router.

  I recently bought a printer HP Deskjet 3525. I have Windows 8 on my laptop. I have a router and want to use the wireless function. I downloaded the necessary drivers, because the cd supplied with the printer that it is only compatible with other Windows operating systems.

  I can connect to wireless on my laptop, but when I try to print wireless, it does not see the printer.

  Before, I chose the software and configuration of the printer. Then select convert to Wireless Usb.

  Then, it is (your printer could not join the wireless network)

  The green bar then runs and he sees the printer model: HP Deskjet 3520 Series + No. series + name of the wireless network and MAC address.

  I printed a wireless test report and the network name (SSID) - FAIL

  Any help

  Unfortunately, after reading the manual (see below) and check the connectivity of this unit, you need to have a router. While some of our printers are supported wireless direct, as shown above, it is a lower end model and does not support this feature.

  Connectivity: Page 33 - http://h10032.www1.hp.com/ctg/Manual/c03355292.pdf

  Art-S, the software is available for Win8 on our Web site. The software is made available for public download as soon as it is available, I'm sorry for the inconvenience.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & LC = on & DLC = in & Product = 5241265

  I hope this is the information you need, have a great day!

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• HP deskjet 3510 does not work after windows 8.1

  My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

  @klb75,.

  Thanks for posting.

  The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

  After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

  * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

  If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1

• HP deskjet 845c does not print

  My printer is "hp deskjet 845c. My operating system is 'Windows Vista - Service Pack 2'. The cartridge does not move when I try to print or open the printer itself. The green power light & the orange alert light both blink. There is no jam or something like that. Everthing is clean, without dust inside & on the cartridge. Refreshment & reset does not work. Any advice will be appreciated. Thank you.

  cBaker

  Hi craigbaker1,

  What are the levels of ink in each cartridge?

  I would recommend reinstallation of ink cartridges and replacement of low ink.  Are you able to move the cart?

  You can also try a hard reset in the following order.  To do this, unplug all cables including the power cord at the back of the printer when the printer is still on.  Unplug the other end of the power cord.  If there is a power supply on the power cord, disconnect one end and reconnect it.  After 60 seconds, plug the cable directly into a wall outlet ( not a surge protector or battery backup ) then plug it into the back of the printer.  Are there changes?

• HP Deskjet Ink Advantage 1515: problem: HP Deskjet 1515 does not print

  Sorry, English is not my mother tongue, and I do not know how to express... I have a problem. HP Deskjet 1515, Windows XP SP3, Microsoft Word 2003... -No document is printed, same test print does not work. New drivers are loaded. 'HP print and Scan Doctor' utility does not help. What should I do?

  К СОЖАЛЕНИЮ, АНГЛИЙСКИЙ НЕ ЯВЛЯЕТСЯ МОИМ РОДНЫМ ЯЗЫКОМ И Я НЕ ЗНАЮ КАК ВЫРАЗИТЬСЯ...

  У МЕНЯ ЕСТЬ ПРОБЛЕМА. HP Deskjet 1515, Windows XP SP3, Microsoft Word 2003... -НИ ДОКУМЕНТ НЕ ПЕЧАТАЕТСЯ, ПРОБНАЯ НЕ РАБОТАЕТ ПЕЧАТЬ ДАЖЕ ОДИН. НОВЫЕ ДРАЙВЕРЫ ЗАГРУЖЕНЫ. "HP print and Scan Doctor" Утилита не помогает. ЧТО Я ДОЛЖЕН ДЕЛАТЬ?

  Hello centurion-x.

  Try an other drivers so that you can at least be able to print.

  Here are the steps...

  1. click on the Start button on the computer.
  2. then click on Control Panel .
  3. then Printers and faxes
  4. in the top left, click on Add a printer
  5. click Add a local printer
  6 then, while 'use an existing port' is checked, select "virtual USB port ... "and then click Next .
  7. in the manufacturers list, select HPand select from the list of printers Deskjet 990 c", then click Next and complete the wizard.

  Now try printing. It should work.

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi