HP Deskjet Ink Advantage 4515: print jobs automatically cancel middle of print printer HP Deskjet Ink Advantage of 4515
Hello
Recently I bought the HP Deskjet Ink Advantage 4515 e-all-in-one printer and installed this printer wireless, operating system is 64-bit Windows 8, but question current side in print documents.
When I give print for black & white command it printed perfectly, but when I give a command for printing, paper color as (color photos) it cancels the middle of printing automatically print job and produce the half printed paper.
Please help me solve this problem.
Thanks in advance
Kind regards
Rahul Thakur
Hello Rahul,
Try following these steps instead and check if this may help:
-Open the HP software clicking on the HP Deskjet 4510 icon in the desktop or the Start Menu, and then click the link to the Home Page of the printer (EWS).
-Click on the network tab.
-According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
-Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
* Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
-Click the HP Deskjet 4510 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
-Type the IP address that is configured manually, click on save and confirm.
-Open the control panel and go to devices and printers.
-Right click the HP Deskjet 4510, then select printer properties.
-Open the Ports tab.
-Click on the button Add Port, select Standard TCP/IP and click New Port.
-Follow the procedure by typing the IP address that is configured manually and confirm the changes.
Now try printing and check if the problem solved.
Kind regards
Shlomi
Tags: HP Printers
Similar Questions
-
PHOTOSMART C410: Not available at this time ink levels. Automatically cancel printing
When you try to print. Document starts printing then error message appears "Not available at this time of the ink levels" CANCEL PRINTING. The print job is automatically cancelled.
Result: Prints 1/2 a page then stops. Spit then several pages with one line of numbers, letters and symbols.
Recently moved to the new HP laptop. I installed driver and software HP several times.
Connect to the Internet via the VPN
As you copy it, I suspect that the problem is related to software and how it is communicating with the printer. Let't remove the software completely and install the base to start driver.
- Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
- Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
- Download the software and choose Save as, save to desktop > PS_AIO_07_C410_FSW_Full_Win_EMEA_140_222 - 4.exe
- After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
- Locate and open the folder starting with 7z (example: 7zS2356)
- Open the Util folder
- The CCC folder
- If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP run the L4uninstall.exe
- Once the uninstall is complete, reboot the computer
- Follow these steps to reset the registry settings and options for Windows Installer.
- Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
- In the Open box, type msiexec /Unregister, and then click OK.
- Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
- In the Open box, type msiexec/regserver, and then click OK
* Note: there is a space between the c and the /.
If you do not at this stage, use this link to perform another way. Restart Windows install
- Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
- Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
- Restart the computer
Once the computer is restarted, please download and install the driver of base from here: PS_AIO_07_C410_FSW_Basic_Win_enu_140_222.exe
Please let me know if you can print with the base driver. Thank you.
-
M477fnw: Memory is low. The job is canceled M477
Sorry, I'm new here and I am trying to solve this problem, but I'm out of options. I am trying to print this page, but it gives me that this memory is low, job is cancelled error message. I tried to add a USB drive to the printer to increase memory, but he had no solution. Someone at - it ideas?
Thanks advance!
Rodrigo
Hi Rodrigo,
Try to install the latest firmware for your printer, it lists the following improvements:
Addressed several issues that could result in memory out conditions while printing.
You can download and install the latest firmware by following this link:
Hope that helps,
Shlomi
-
Last month, my office has been freezing almost whenever I connect, I rebooted my laptop or close and turned on afterwards. The way I know that it is frozen is when my wifi icon is the blue loading circle and when I right click on my slider and it is located in the blue loading circle. Then after I do a restart hard (hold the power button and back - turn on my laptop), after the screen usual "the computer did not turned off properly", I see "scan disk" screen Even if I touch any key so analysis can run and maybe find the problem, the analysis is automatically cancelled. I pass this cycle at least twice before being able to use my computer properly.
I've had my laptop for 4 years. It is a Dell Inspiron N5010 Windows 7 Ultimate 64 - bit Intel Core i3 processor. For safety, I got Kaspersky Internet Security for one year. Is there anything that can be done to prevent it happening again?
Hello
You can check with Dell, their books online technical support, diagnostics,
and ask questions in the forums about known problems.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
==============================Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Windows hangs or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those without drain in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I paid my creative student account for 2 months but I found our school to provide a plan of one year $ 170 for us. So, I bought this plan. Will my older plan was automatically cancelled or need for any other action? My account is [email protected]
You need to get the previous plan cancelled.
If it's subscription month. You can cancel this subscription form your adobe account:
Cancel your membership creative cloud
Otherwise please contact support:
Hope this will help you.
Concerning
Megha Rawat
-
Windows cannot recognize the printer after the print job is canceled
When I installed my printer Epson XP - 410 on my laptop Windows 7, the installation of program established three identical icons in the box "Show hidden icons" system tray, a 'Epson XP-410 series named' and others adding "(Copy 1) and (copy 2) that." It was not critical until today when I ran in the paper and cancelled the print job. Now rather than see the icon for XP - 410 as before, Windows Live Photo Gallery is only to see the icon (copy 2) and the properties of the printer selection under print settings is looking for a printer that does not exist, say is not ready, showing without ink, etc.. Anyone know how I can get Windows to recognize the printer that is there instead of look for one that is not there? I tried to customize under Show hidden icons, but when I change the status of the any icons, they change all three at once. Any help would be so appreciated...
Original title: duplicate icons in the box "Show hidden icons" in systray
Hi Robert,.
Thanks for posting your query in Microsoft Community.
I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.
- What is the exact error message you get when you give the print command?
- You have related driver printer disks to install the printer?
The question may arise if the package of printer from the printer model driver is either not installed correctly or has been corrupted.
In order to diagnose and solve the problem, I would say, try the following methods and check if the problem persists.
Method 1:
Run the printer Troubleshooter and check if that helps. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.
Open the printer Troubleshooter
If the problem persists, try the following method.
Method 2:
Try to uninstall and reinstall the last full have printer drivers and check if the problem persists.
Step 1: Uninstall the printer drivers installed in the system
- Open programs and features, click Start > Control Panel > programs and features.
- Find and select Epson printer drivers in the list of programs.
- Click Uninstall and follow the instructions on the screen.
- Reboot your system.
Step 2: Reinstall the printer drivers
Reinstall the latest drivers at the following link that is compatible with Windows 7.
Additional information:
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
Hi John - thank you for your response. For the benefit of someone else who has this problem, I was able to perform a miracle. Went to Start - devices and printers, found three printers instead of one year, removed the two copies and who has also removed the two unwanted icons in the systray. Now, everything's fine. Hope this helps someone. Thank you, Christian...
-
Nothing is printing because a job is CANCELING
I have a feeling which was cancelled 5 days! Because of, I believe that nothing is printing. I tried everything I could think of power, reset, cancel the account and open a new one with a new ID (impression being canceled was always there), etc.
Is it possible to clear the queue? Any ideas?
Thank you.
Dan
If you are unable to delete the print job from your queue via the option Cancel in the line of work, I suggest that you remove and then re-enable web services on your printer.
Who will be remove your printer from your ePC account, clear all print jobs and provide your printer with a new email address. Then you can add your printer to your account using the new email address.Can you tell me what print job is 'stuck' - was it a standard email, HTML email, email with an attachment or embedded images?
Thank you.
-
03/03/14 my eprint was working fine but today tried to send an email from my Android phone several times and no go.
When I connect E print and check on print jobs, that it says INTERNAL ERROR, PLEASE TRY AGAIN. Is a server down
somewhere due to weather conditions. Help, please
Hi MBA1,.
Welcome to the HP Support forums. I understand that you tried to send an email to your printer from your mobile Android and it failed.
Still having the same problem? I checked with HP Cloud service and they indicated that there was a problem, but it has been resolved. If you are still experiencing a problem, can you please give some other information:
(1) do you get the message even if you try to send an e-mail to the printer?
(2) what happens if you try to send an email from a different email address?
(3) you put the printer email address in the BCC field?
(4) you are trying to send from an exchange based email address?
Thank you.
-
My free trial of Photoshop will automatically cancel?
I just started my 30 day free trial. It will automatically convert the paid plan? I don't want to have to manually cancel...
Yes.
-
The automatic cancellation of password main provides access to protected sites?
When I press 'Cancel' in the master password of Firefox local always fills the username and password for the site. How to prevent this? Win 7, FF 22.0
Ah, fixed. It was the "mask-Me" add-on! https://addons.Mozilla.org/NL/Firefox/addon/maskme/?src=search https://www.Abine.com/maskme/
-
Check the disc automatically cancels
I need to do a system restore but it says I have errors on C:. When I try to fix them it says that I can't fix a disk that rotates and I need to schedule a check disk for the next startup and make. When it starts the disk check semes start but immediately said that it has been revoked. Then, the computer will continue to boot normally. I tried to do this in safe mode and the same thing happens.
I need to do a system restore but it says I have errors on C:. When I try to fix them it says that I can't fix a disk that rotates and I need to schedule a check disk for the next startup and make. When it starts the disk check semes start but immediately said that it has been revoked. Then, the computer will continue to boot normally. I tried to do this in safe mode and the same thing happens.
Hey Hazufrazen
There are a few tips on this in the tutorial below
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
Walter, the time zone traveller
-
Download automatically cancelled
Suddenly, for some reason any, whenever I have download an update and click on the "Save file" option, the download is canceled. Can't successfully download updates either. If I click on the download in the download window, it appears to download, but I can't open it. Can anyone help with this?
OK, well the only suggest at this stage would be a system recovery. This will bring the laptop to a State when you bought it. You should back up the files that you recently saved with an external HARD drive or USB key. Here is a documentshowing you how to perform the restore. Please let me know the results.
THX
-
Photoshop Elements 9 automatically cancels Installation
Hello. I just "disabled" my 9.0 PSe from an old computer to move to another. I copied the contents of the DVD on a USB drive to get on the new computer. When running Setup.exe, it seems back properly by moving 9 PES, PES then organizer of common elements. After the third stage, he goes to "roll back the installation" of each of the three components. Is there any solution for this? He seems to accept the serial number very well. Thank you!
Please see the links below.
- Install rollback and Shared Technologies | Windows
- Troubleshoot installation | Adobe Photoshop Elements & Adobe Premiere Elements for Windows
Hope this will help you.
Kind regards
Hervé Khare
-
my printer keeps repeating over and over again the same print job, and I can't seem to stop. I tried cancelling but it stops and when I go to print something again it prints the same job, I canceled. Help
Hello
Try the following.
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler service, right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the document has been deleted.
Kind regards
DP - K
-
Cannot cancel queued print job
I have an Officejet 4500 printer who was printing fine, and then I have a paper stuck in the print queue that I can't cancel. I have: (1) printing cancelled printer several times - he says job is canceled, but then the power button flashes. (2) turned repeatedly printer power switch and when I turn it back on again the same old print job starts printing again (and that's a big print job). (3) used HP-online tool to scan for the printer and it says everything is fine, but when I go to print a test page, the same old work printer starts printing again. The only thing I did is removed the printer from my computer and reinstall the driver, but my concern is the print job does not appear in the my computer print queue and it is now at the printer (?). Help!
Hello
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler service, right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the documents have been deleted.
Kind regards
DP - K
Maybe you are looking for
-
Need facilities for Satellite A100 WXP CD
Hello When I bought my Toshiba A100 last year it did not come with an installation cd, now I want to rebuild my laptop to get all this allowed to go out and run fast. How to get a Windows XP Professional cd that will work with the cd key on the under
-
What iPad Air model is MD793X/A
Need to know if my iPad Air is a 2, iPad 2 Air cover will be good for iPad Air?
-
I received a file where I swap shows the data in the rows into columns using transposes table 2D. The problem is now, now, it shows all in a single line. How do I divide it into several lines? From: Simplex-link duplex-linkn1 n0n0
-
Well guys, I did a program here in LabVIEW... and I taped it with the name 'Show 4V4I 480V '. but when I saw in the façade, it appeared 'Show 6V3I Vbat 2008 [show 4V4I 480V]' I took an old program here 'show 6v3i vbat 2008' and make some changes and
-
Original title: C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf When I do a scan of security whenever the reached scan as this point, the computer freezes and thoughts? The point is C:\ProgramFiles(x86) \Photo-Service\optionallMobul