HP Desktop: transfer of collateral to a second owner

Similar Questions

• Transfer of license to the new owner

  I want to transfer the license to the new owner, but the www.adobe.com/go/supportportal link does not work, what should I do?

  Here you go: transfer an Adobe product license

• Transfer of pictures for a second time to help using Windows 7

  I'm having a problem transfer a photo to my computer.  I'm not young (!), but have generally been successful using the system of automatic transfer of Windows that appears.  I have a photo I kept it on my small device which I have already transferred, but I lost on the computer (don't ask!).  I would like to transfer once again, but don't know how to do in this regard.  Nothing comes up when I wire to the top of the camera to the computer that I guess because I already transferred.  Any help would be appreciated.  I have Windows 7 Professional amd a HP XT249EA desktop computer.  Thank you very much.

  Hello

  What is your camera? There should be a cable to go with it, or even better, you can remove the memory card and use a card reader to copy the photo to your computer. I'm not too young, I was born after WWII. Hope that I'm younger than you (sorry, just kidding).

  Kind regards

• Hello, having real difficulties to display the versions Tablet and my Muse created the website on the phone and Tablet phone, everything indicates the desktop version. This is the second time Ive designed this site, after reading that redirect the links m

  Help with the help of Adobe Muse CC

  It may be little reason to do this, including links to page content or content used in the phone/tablet version.

  Please provide the url of the site, also try to publish the site as a place to test with all the layouts that would help to isolate the problem in Business Catalyst.

  Thank you

  Sanjit

• Warranty transfer - sale mini laptop

  Hi all

  I'm selling my NB250-107 and will need to transfer the remaining time of the standard warranty.

  After reading the small PDF for the (European) standard warranty and Googling a reasonable amount, I don't see any processes for the transfer of the standard warranty to a new owner. Could someone advise me on the correct processes and procedures to follow for this please?

  Concerning

  Paul

  I m not 100% sure, but you don t need a transfer of collateral for the new owner.
  As a first step, it is important that cell is recorded by Toshiba and the new owner has original invoice that you give.

  If there is some service issue will verify registration and purchase date. With the original invoice, new owner has good and valid document.
  Just for example: hundreds of laptops eBay change owners every day and no one send some transfer of warranty. It is important that new owner an original invoice with Notepad.

• How can I transfer all the messages/conversations from my iphone to messages.app on my mac?

  Hi people,

  Maybe someone can help me:

  How can I transfer the entire contents of my messages app on my iphone to the messages on my mac app?

  the problem is, when I create in the messages app a new account with my appl ID (for example on a new mac) I also use with my iphone, so everything worked very well for the starting point of creation.

  BUT... some older posts, I have on my iphone will appear in the new messages.app - account on my mac.

  I have thousands of old messages and conversations, I now can only see on my phone or with some more or less useful third party apps. those who cannot vonert messages to a PDF file or som other format useful semi > but no one can transfer it in the messages app.

  • I learned that apple does not save my imessages for more than 72hours (which makes me happy because of the confidentiality of the data), so I can't take via imessages-servers.
  • I also learned that it is possible to transfer data from the library files to a previous account. but unfortunately, I've just accidentally deleted those files, so this solution won't help:
  • I had serious problems to enable the transfer of SMS on a second mac (I guess I failed it in between), I went in the ususal trial & error-process and disabled the account of messages on the mac.
  • After that, I deleted all caches using onyx. then I restarted the iphone and the macbook and restarted the messages app.
  • the app behave like the 'never used before': I entered my apple, app ID remind my cell phone number and all other settings from the old account, but THE MESSAGES WERE GONE alle.
  • I don't know I deleted the using onyx. but there should be a way to win back them?

  the system configuration:

  • Start "2011-17 - macbook pro with latest el capitan (10.11.6)"
  • iPhone 6 with latest iOS (9.3.5)

  PLEASE Please HELP me - even if I use third-party software...

  Hello

  Can't do.

  iMessages are pushed by the iMessages servers to devices recorded at this time there.

  They are not held on servers and are deleted as soon as receiving devices accept.

  (that is, it is not like electronic mail that can be left on the server (POP) or rest on the (IMAP) server to be retried by other devices that can identify you later).

  How the files/iMessages are stored on the iPhone and the way the Mac stores are not the same.

  It is possible to have the iPhone one store backup via iTunes on Mac.

  From there on, it is possible to use third party applications to read (check out them and make them as text files), but they cannot be forced into Messages.

  By copying and pasting entire conversations from one chat to another it's the Mac send s just like a long piece of text with few (not in use) formatting.

  Can also have problems with actually duplicate the whole file with space on the iPhone in the first place.

  

  19:44 Friday. September 2, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Installation of a second hard disk in P6 - 2412 has

  Is there a position to mount a second HDD in case the Pavilion P6 - 2412a?

  I had a peek inside and can't see anything obvious.

  We spare ports SATA and connectors to power supply but I can't find a place to mount the real drive.

  Any ideas (other than to let it hang) would be appreciated.

  Hello

  Those also too ask about it:

  http://h30434.www3.HP.com/T5/desktop-hardware/adding-a-second-HDD-to-an-HP-Pavilion-P6-2450ev-desktop/TD-p/2431067

  http://h30434.www3.HP.com/T5/desktop-hardware/adding-second-hard-drive-to-a-HP-Pavilion-P6-2100-desktop-PC/TD-p/1624857

  http://h30434.www3.HP.com/T5/desktop-hardware/HP-how-to-says-second-hard-drive-can-be-added-to-P6-2026-but/TD-p/1070205

  Option: use the optical drive (5.25 ") with media Bay for. 5"HDD.

  Good luck.

• a second hard drive

  Hello everyone, I have a dell optiplex gx 580 desktop computer and I want to know if I can add a second hard draive of SATA that he

  Thank you

  shesagordie

  mujaka

  Sorry, but the GX 520 desktop version does not support a second hard drive, a 3.5 "internal HD is supported, [page155] here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_optiplex_desktop/OptiPlex-gx520_user%27s%20guide_en-us.PDF

  But, if you're willing to lose the optical drive, a second hard drive can be installed in the Bay 5.25 ".

  Bev.

• Problem with an old Dell desktop computer

  Hey guys :) first post here! Happy to be part of the community!

  My father has so some of these old Dell desktops at work that were purchased second-hand and some of them don't work at all. I was asked to provide assistance and we managed to get most of them and running outside.

  Long story short - when you plug the power cable into the PC, the fan runs for a very short time and the power light flashes green light after that the computer is ready to go.

  The problem with this particular computer is that when you plug the power on the computer the CPU fan starts to spin and power light blinks with a light orange and never stops. By pressing the power button has no effect. The power supply of the computer has been replaced, but the same problem persists (the power supply works normally on other computers). All the problematic capacitors have been replaced on the motherboard (which fixed this issue with other computers) but this has still not had any effect.

  The computer has been tested with its minimum parts bare, stripped of all readers of storage, RAM and anything else, but is still unable to boot to the BIOS or do anything.

  My question is - is this a known problem and what measures would be a good thing to determine the cause of the problem?

  Unfortunately, I do not know the exact model of the computer, but I have some pictures of what you can find here:

  

  

  

  

  

  Feel free to ask for additional information if required.

  Thank you in advance!

  CAP'

  It is an Optiplex GX280 SFF.  Regulatory model DHP

  http://www.Dell.com/support/home/us/en/19/product-support/product/OptiPlex-GX280/manuals

  Shipping date: November 30, 2004, country: Denmark

  The model is written around the ring on the power button.

  The behavior is a Committee with bad traffic and bad diet.

  

• New 8 dualboot windows desktop

  I have a new windows desktop computer 8 to install the second hard drive with vista 64-bit from the second hard drive, it displays a dual boot when I start it after that I have the second drive?

  I did it and it worked fine. I had to remove the drive letter of the system drive booked at the start of the secondary o/s as it is assigned automatically. I've also tagged each partition clearly what always got me some what disk I got to go to them because I had additional partitions.

• Slow opening Excel file with MACRO and links from network on the Desktop view file server compare to physical PC

  Hi guys,.

  It's a weird thing.

  I just encountered a very strange problem when you open one of the excel files located on a Linux Samba Shared running file server.

  My laptop physics has a Dual Core 2 Duo 2.27 GHz, 4 GB of RAM and Windows 7 Pro 32-bit.

  My Desktop view has 2 vCPU (UC from host to 2.99 GHz/Core with base 16), 4 GB of RAM and Windows 7 Enterprise 64-bit.

  Note: The Desktop view is located on the FusionIO card locally on the server, so it is lightning fast.

  When I open excel file from my physical office, need you 3 seconds to open and 5 seconds to enable the content (because it is a big xls file with a bunch of MACRO and LINKS to a different worksheet)

  When I opened that same excel view Desktop file, it takes you 18 seconds to open and 1 minute to activate the content.

  Anyone happened to have the same problem with their environment to experience?

  Do you mind sharing some tips to solve this?

  Finally, be able to locate the problem.

  It was Sophos EndPoint AV for vShield that I deployed for assessment.

  Once I turned off politics, everything is back to normal.

  Couldn't believe that via vShield endpoint was causing all this because I tried Symantec and BitDefender for vShield before and no problem at all.

  Well.

  I hope that Sophos or VMware vShield team has a solution for me.

  Nice day!

• I can not connect on windows vista home basic desktop pc because of the former owner

  I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K

• End of transfer Dell computer property

  I bought a used computer from Bestbuy taken and the manufacturer's warranty is still available. I'm trying to raise a request for assistance from Dell and they asked me to transfer the property to the previous owner of my name, in order to process the request. I didn't know the name of the previous owner and I contacted best buy, Geek squad, best store customer service buy as well and they said that they could not provide customer information due to their confidentiality rules. They asked me to contact Dell that they must help me change the owner myself. Dell customer service recognize they sold at best buy, but the serial number is associated with another owner who they want that. I'm in a scenario where nobody is troubleshoot.

  I'm gone in this forums and tried others corrected using thread below.

  http://en.community.Dell.com/Dell-groups/new-to-community/f/3511/t/19257087

  I have this 10 days back, and since I have not heard of Dell, I connect with them to know that they refused my request. I need your help to solve the issue as soon as possible because I spent more time on it.

  Hi ynr00,

  Thanks for posting your comments on the Dell Community Forum Office client for protection. I may be able to help with this problem of transfer of ownership. Please respond to my e-mail and provide the requested information so that I can access your records into account.

  Thank you
  Lorna

• Transfer of license of Macromedia Studio MX

  Hello

  want to sell my Macromedia MX Studio (trade version). How can I transfer the license to a new owner?

  Any help is appreciated...

  The license transfer is not made for Macromedia, however please contact contact us | Adobe & application for registration of a ticket that document you would transfer the product.

  Concerning

  Stéphane

• Transfer of license/casenumber

  I bought and installed CS3 (Windows 10) with the Documents for "transfer of license. The previous owner filled his form with a casenumber. I completed my form. Do I have to request a new casenumber for me / i unfortunately cannot approach a telephone information and the Adobe website is a jungle. What is the link for submitting the forms PDF (www.adobe.com/go/support/contact) does not work

  I'm tired of wasting my time with this bureaucracy

  Hello

  Please see transfer a license of Adobe product

  For more information, please contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena