HP Director - does it come Standard with all the HP all-in-one?

Similar Questions

• I got blue screen and now my elitebook 8440p screen does not come on at all

  I installed TuneUp Utility and after use and restart my system, I got blue screen. I restarted in safe mode and still had the blue screen. Now, my screen does not come on at all. When I start it up, all the lights come on. caps and num locks juices flashes three times and turns off.
  I don't know what that is... problem can someone help pls?
  thnx Toffby

  If the lights Flash 3 times when its engine, it is a failure of RAM or problem with RAM slot on the motherboard. You can find more information here

• 114 the desire does not connect to Asus all-in-one wireless but connects to the wireless network

  I just bought my HP ENVY 114 e all-in-one last week and I tried to connect it to my computer (Asus all-in-one Windows 7 64-bit) and while he wil connect to my wireless very well my computer (or my cell phone which is also an Asus running windows 7 64 - bits) cannot identify it.

  Using the disc doesn't help nor did try manually to add in 'Add printer' in my computer and all the interest to get this particular printer was because it was wireless. If I have to plug in a USB key then I have saved money and bought a less expensive model. All my devices are on the same network, and their firewalls is turned off so that it does not hinder the process.

  When you browse the drive Assembly he asks the IP and I get it exactly as it is on the screen printer that I even printed it out and double checked 5 times and it was exactly the same, but he keeps asking for me to be reintroduced to it since the computer cannot identify the printer.

  Any help would be great I prefer not to have to pack up this thing and take it back...

  Unfortunately, the router and the printer do not get along at this stage.  The IP address changes too often and it is possible that the router has its own firewall.  A large number of firewalls, outside the Windows Firewall, sees a lot of traffic from hpnetworkcommunicator.exe and blocks preventing the software to find the printer.

  I saw this model of router and it doesn't have a built-in firewall.  Unfortunately, I could not see their manual without you register on the site.

  It may be preferable to set a static IP address for the printer in the router's routing table.  To do this, you acceding to EWS the router.  If you don't know how to set the printer's IP address in the router, you can try to contact the vendor of the router.

  Otherwise, I would recommend checking the firewall of the router.  I saw a router cause problems with an overactive firewall in place.

  If you happen to have an extra router around, you can try to use it instead of Paul's to confirm that it is the router.

  EDIT

  You can try to put a static IP address on the front of the printer.  I'm personally not too successful with setting a static IP address on the front panel when the SAP does not load, but this could be one of those cases where it does not.

  First, print a Network Setup page by going to Configuration > Wireless > Network Configuration > print Network Configuration.

  Then, go to settings > network > IP settings > change to the manual.

  Once it is replaced by the manual, it should allow the IP address, default gateway and the subnet mask.  Use the subnet mask and default gateway of the print network configuration.  Use an IP address that is not in use on the network.  You can change the last number of the IP address on the print.  For example, 192.168.1.50 could be converted to 192.168.1.250.

  Setting a static IP address on the front panel does not set servers DNS which is necessary for ePrint operate on this printer.  Now that the static IP address has been set on the front panel of the printer, try to access the SAP by entering the IP address that comes to be defined in a browser address bar.  If the printer load, you should be able to set DNS servers and be ready to go from there.

• Logo on Quickbooks & PayPal does not print OfficeJet 7210 All in One

  Spin Windows 8 (64-bit). My logo on invoices from Quickbooks & delivery notes and mine and logos of PayPal on the PayPal online forms do not appear on the output of my HP OfficeJet 7210 All In One, BUT they do when printed on other printers I've tested using the same documents. I downloaded what I believe to be the printer driver on the HP support site, but the problem persists. Need some suggestions, please.

  Hello joefredt.

  Thanks for the information. I want you to add a printer Deskjet 990c. Please open "devices and printers". Once that opens click on add a printer in the dialog box. Now click on "add a local printer. When it says "use an existing port", the drop-down box and search for the USB0001. Select it and click "next".  Please click the button of "Windows Update". This may take a few minutes to complete. Just wait for the "MFG" and "Printers" list to fill again. When they come back to the top, scroll down to "HP" (no), and then search for printer "HP Deskjet 990c" on the right side. Please select this option and click Next. After that simply select the Finish button. Once the printer is installed you can your print jobs that you have problems with the printer. I hope this helps.

• Black cartridge does not print 6500 wireless all-in-one printer

  He can't get a black cartridge to print even after cleaning the print heads on my of 6500 all-in-one wireless printer.  I tried cleaning the heads of print and sensors twice no longer useful, but can print color.

  jweatherly, unfortunately, it seems that your printhead may be dried or damaged. I would recommend that you replace it if a local retailer or through HP directly.

  However, the print heads can be an expensive part of the printer to replace. On this thread (http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500-Office-jet-E709a-Black-printer-cartridge-HP-920-not/m-p/447545#M28623) Bob describes some steps to clean the printhead in a more direct way. It might be useful to follow the steps, he did and see if it improves your print quality, since he worked for others.

  Let me know if it helps!

• Does not work HP C7280 all-in-One re ink cartridge to expire-pressing 'OK' to activate printing

  All-in-One HP C7280: received message that ink cartridge is about to expire. In order to '... continue with this ink' (it has not yet expired), I pressed 'OK', but nothing happened (the message is not 'disappear' from the screen"and I am not able to print. I turned the printer off-and-two times but nothing helped. The "OK" button worked, even if, to lead to the elimination of a message previous concerning a different ink cartridge havingactually has expired.  Suggestions?

  Thanks for the info. I'll try your tactics by chance discovered when the problem recurs. I finally gave in and changed ink cartridges--lost some of the expensive ink HP - as I had to print a document on this printer as the other was not available.

• Jet office 6600 to work with all in one computer (scan)

  I have a hp officejet printer/scanner/fax/copy 6600 and I have just purchesed an all in one HP computer.  The printer software is not supported by Windows 8, and I can't get my scanner to scan to my computer.  Help, please!

  Ah ok. I just realized that you have not successfully updated Windows 8 software and drivers for this Office Jet. Download the full driver from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5304873#n197

  That should make it work just as you expect.

  I hope this helps.

• Small Question: Does the Inspiron 530 comes standard with an IDE or SATA DVD Drive.

  Specifically this one: http://configure.us.dell.com/dellstore/config.aspx?c=us&l=en&s=eep&cs=6096&eep_orig_cs=6097&oc=RDDWDGX&link_number=17970705&dgc=CJ&cid=24471&lid=566643

  TIA

  
  

• my screen does not come on at all. hooked to the monitor external and still nothing. laptop lights

  HP G60-635DX laptop

  Windows 7 Home Basic

  Screen of death

  Turned on and the screen never came. The laptop computer on and sounds like it is starting fine but not the screen. I connected it to a monitor outside and still nothing. What should I do?

  Can sometimes remove the strips of memory and only one putting in the memory slot closest to the CPU. Doing this and try to start Windows. If no joy with the first module and then remove it and try the other module in the same position.

  If that doesn't do anything so I hope that your laptop is still under warranty. If it is to Contact HP.

• Lightroom 3 does not import images with all the parameters used in camera

  I just upgraded to lr3 and import pictures from my Nikon D5000 in RAW format.

  I shot a bunch of images in monochrome mode on my camera with my contrast, sharpness and other parameters adjusted to my liking.  When I import into lightroom on the thumbnails, they seem to be that I shot them in black and white.  But if I click on the image in develop it converts in color and seems to remove my settings changes I had made in my camera.   I tried to click on black and white and it converts into a monochrome pure with any of my settings or the other.

  How can I tell lightroom to import images as-is and not change them unless I specifically choose changes to develop?

  Thanks for any help.

  The Lightroom FAQ has the answer to this frequently asked question:

  http://forums.Adobe.com/thread/358016?TSTART=0

• black ink does not print HP Photosmart all-in-one

  I have new cartridges and after installation black will not print.  All other colors are pring.

  Hi Luv2dance728,

  Thanks for the reply and the information

  I suggest you start as a result of this document for Troubleshooting print quality problems, should be able to help you to get black ink works again. If it isn't, you can also try manually cleaning your print head to make sure there isn't a buildup preventing out black ink.

  If the printer still won't print black ink, it is perhaps an accumulation inside the print head or on the beak and to help solve this problem, you can follow the instructions in Bob_Headrick in this post on soak your printhead.

  If after these three things, black is not always print, it's a hardware problem with the printer print head and I suggest to call HP Support and inquire about their exchanges of and the trade program.

  Hope this helps, have a nice day!

• D110: Printer Destination does not exist - for D110 all-in-one

  This printer is connected via a Charter Communications wireless router wireless. Printing and scanning has been working well. 2 nights ago he stopped and we started getting the message "the destination printer does not exist" in the window of the printer.

  I am currently working on an iMac 10.6.8 running, but the same thing happened on a Macbook running the same. I just tried on this macbook again and he did print, although he had problems yesterday. Of course I tried earlier once more on the iMac and it did not work. I can print a page of test here, however.

  I tried the following:

  1 remove the printer and selling it.

  2 download a new copy of the driver and install it.

  3. follow the instructions to change the IP address via the web interface, stop the router and printer and then start up the two, router first, then the printer after it increased. relisted to the printer. The iMac certainly sees the printer for purposes of installation and status, but not for printing.

  What now?

  Thank you

  Ellen

  Hi@Ellen_B,

  I see you are having problems printing from Mac. I will definitely do my best to help you.

  Print a Network Configuration page to get the printer IPv4 address.

  Go to settings, wireless, print the Network Configuration Page.

  If you have a valid IPv4 address for the printer, then try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If multicast is disabled on the router, you will not be able to add the printer as a Hello device.

  If you encounter network problems, and then add the printer via the IP protocol.

• How can I fix problems with all-in-one printer when I have Windows 2010? There is no driver for it.

  My computer crashed. Replaced the hard drive and installed Windows 2010. Now, the scanner does not work. Impossible to download a driver because HP is not Windows 2010 drivers listed for download.

  Sorry for the confusion, the forum here is not connected to the system of HP support and volunteers here (like me) do not have access to the information provided to the HP support unless include you in your message.

  I suggest that you unplug the printer (if you use USB to connect), then download and install the driver here.  Do not connect the USB up to be instructed by the installer.

  After the installation is complete, apply the update here.

• Is it possible to use the wizard to analysis of Microsoft with all-in-one HP Officejet 7410?

  I have a HP Officejet 7410 connected to my system and it works well had to analyze the documents, that I prefer software that comes in the accessories of Windows XP. Naturally, the HP software overrides this facility and the scanner is not seen. Is it possible to make visible in the Microsoft program?

  Thanks for your suggestions.

  If the printer is connected by USB cable, you should find the scanner icon in the control panel > Scanners and cameras. If you double-click on the icon of the scanner, it should start the wizard for scanning.

• Copy function does not work; HP F380 all-in-One

  Printing and scanning functions are working properly, but the copy does not work.  He stopped abruptly.  I installed a new cartridge, nothing helps.  Also unplugged printer and wait 60 seconds before I plugged it again.  Still no copy.   Any suggestions are appreciated.

  Solved!  I discovered that the printing and scanning functions used the color cartridge that printed as a dark blue.  When I ran the copy function using the copy color button, it worked.  Guess I had a bad black cartridge.

  How can I report this as RESOLVED?

  Hello Dolton,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I'm glad to hear you solved your problem! Unfortunately, you can not mark your post as the accepted Solution. But if you check my post as an acceptable option, then the thread will be resolved. In this way, others will have an easier time to find this information.

  Please let me know if you have any other questions. Thank you for choosing the HP Forums. Have a great day!

  Mario