HP DL360 with ESXi - local disks required for the SWAP file?

Similar Questions

• What to do with free mini PCIe - Flash for the swap file

  Hello

  in my T500, there is a free mini near the location of SIM location PCIe, but that's only half of length. I found an SSD at SuperTalent in these Dimensions. Someone out there who has tried to use this slot for storage, for example $TEMP or swap file?

  Kind regards

  Ronny

  It will not work. This SSD is designed for the Dell Mini 9, which uses a special type of mini PCI-e slot [FLASH_CON]. This slot machine is connected to a PATA or SATA controller on the motherboard.

  The DSS will not work on PCI-e standard minis housing because they are not connected to a PATA or SATA controller.

  I think that half height mini PCI-e slot is used for Intel Turbo Memory.

• How to free up disk space for the database file

  Hi experts BDB.

  I use bdb4.6.21 transaction Btree access method, found that after vacuum db db-> truncate, the size of the db file has changed. How to free up disk file db space? It can be configured?

  Thank you

  Min

  Hi Min,

  What Mike says is that you do not expect that the empty space after an operation of truncation (for example a delete or update that empties a page) in the database (empty pages) to return to the file system and therefore to see the physical file size decreases.

  The next section of the documentation explaining this: required disk space

  Space released by removing the key/data pairs in a Btree database or Hash is never returned in the file system, even if it is reused when possible. This means that the databases Btree and hash are to develop alone. If enough key is deleted from a database which shrinks the underlying file is desirable, use the DB-> compact() method to recover disk space. Alternatively, you can create a new database and copy the folders of the former into it.

  
  

  So, as Mike suggested, you can dump and reload the data into a new database, or copy data from the existing/old database to a new (to remove the old database and rename a new one the old name), or you can try to compact the database using the method compact().

  If you use compact(), then in order to force the return of empty for the file system pages when possible, use the DB_FREE_SPACE flag and try to avoid using an explicit transaction (use a NULL tnxid pointer, so this BDB will use internally of several transactions that will be engaged periodically to avoid locking large sections of the tree).

  When you use the compaction in order to free up space and return pages from database empty in the file system that it is generally recommended to repeat Compact with a value low 'compact_fillpercent '.  In addition, the following output statistics fields in the structure DB_COMPACT, compact_pages_truncated and compact_pages_free should be examined to determine if there is a point, continuing to run the compaction with the same compact_fillpercent.  If the values are strict positive it is then compact() calling again with the same compact_fillpercent (and specify the DB_FREE_SPACE flag).  The compact algorithm allows a single pass on the pages of the database;  pages so not empty at the end of the file will prevent the free pages (which are placed on the free list) to be returned to the file system.

  Kind regards

  Andrei

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Error: The application-specific permission settings grant Local Activation permission for the COM server application in the Windows XP computer.

  Original title: DCOM {E9F9ED00-7705-101B-9802-0000C07B665C}.

  I have this message DCOM in the registry: "the application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E9F9ED00-7705-101B-9802-0000C07B665C} server application the user... xxxx...". (I deliberately placed the "xxxx" instead of my current PC for security reasons). This security permission can be modified using the Component Services administrative tool." I tried to look through the forum here, and I found elements that were close and others are not. so if anyone knows where I can go make the adjustments, it could save our society approximately $10K, because my new bosses are ready to install all new hardware and software, but if we could find a much simpler approach to this problem, this would make the new kid on the block like a champ look.
  We have a Window XP, the flat touch screen PC, running a few packages of software reviews that keep a record of our SCADA system trend.

  At random times around the clock, the PC will just restart and return to the logon screen. There is no other necessary users, so we have only the journal administrator form. As soon as we open the administrator it is specially configured to run a specific program of our choice, but if the PC keeps restarting whenever it feels like it, there is no history chart tend to save. It is essential, that we need.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Package ID is required for all .bar file.

  Hello

  The error I got is

  Package ID is required for all .bar file. If this is an upgrade, Package ID must match Package ID in original file bundle.
  

  I know that if this error occurs I sign with the wrong keys. I have 2 signature keys, but have backed them up. I chose the file correct author.p12 but it seems that the CSK (Code signing key) is wrong. He always takes the CSK of my other file author.p12 or something. How can I install the correct CSK in QNX Momentics... I'm really desperate...

  I managed to get my key to signature (barsigner.csk and barsigner.db) with Recuva! So if you lost your key, download software and it will get them in 20 minutes.

• Bundle file ([filename] .bar) was rejected. Package ID is required for all .bar file. (...)

  I would like to present the new version of my application, but I got error:

  File bundle ([File_Name].bar) has been rejected. Package ID is required for all .bar file. If this is an upgrade, Package ID must match Package ID in original file bundle.
  

  I try to do everything:

  • App version increment in the config.XML from 1.0.2 to 2.0.0
  • Package using new WebWorks SDK
  • Send the file as a new version , but also by release edition refused

  I can't create new product, because it is application of Last Chance Port-A-Thon...

  Can anyone help?

  The package ID can be eliminated.

  This creates a problem with current users upgrade, but will be resolved in the long term.

  There is no problem for new users or new applications.

• Error: "file beam (Alarm.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file. »

  I am trying to submit a new version of my application "awakening."

  I'm on "Presentation of new Release" screen and when I click on the pencil under the column "Files" icon and select my new BAR file, I get the following error:

  File bundle (Alarm.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Because of this error, I am unable to submit new versions of the application.

  This error occurs generally if you:

  n ' have not increased the number of output

  -try to connect with the new signing keys

• Digital signature is required for the AVG filter driver, I had to disable AVG filter driver to connect to the internet.

  Hello

  Apparently, after the updates (don't know where exactly), a digital signature is required for the AVG filter driver. I had to uncheck AVG filter driver in network card to connect to the internet settings. Now the AVG firewall has stopped and the Windows Firewall is enabled.

  Does this mean that AVG is not compatible with the new updates?

  Hey Deiry,.

  Why don't disable you driver signing in Windows 7 and you would be able to use the AVG firewall. Take a look at the section of the Web site.
  http://www.ehow.com/how_8131643_turn-signing-check-Windows-7.html
  See you soon!

• Are there special requirements for the price of introduction to CC for teams?

  Are there special requirements for the price of introduction to CC for teams? A 3rd provider told me the pricing lives and dies with the system it is installed on.  What does that mean?

  Hello

  You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software.