HP DL585 G7 - restart incorrigible caused unexpected Machine Check Exception

Similar Questions

• Restart: Machine Check Exception Cache hierarchy error (18 events)

  I'm getting reboots on my machine all night (I have a few tasks planned during the night) which means that when I wake up scheduled tasks have not taken place.  Windows reports he had an unexpected restart and verification of that event viewer indicates that there are 18 of the WHEA-Logger event.

  Note: the machine is overclocked, but synchronization is a conservative OC using presets on the motherboard (4.6Gz was not stable so it is on 4.4, I have not tried to manually tweak it more because it's not worth the effort), with the RAM OC below the XMP profile supported.  A 4-hour race with Prime95 test complete instruction set (105W) showed no problems and a CPU temperature has not managed 60 c with considerably lower than that of the RAM, so I'm sure no problem with cooling.  In addition he has not been seen when running anything, only nights that has suspect me something in the States of sleep or power-saving modes is not responding well to a software or settings of the OC.

  System details:

  CPU: Intel i7 - 4770K 3.5Gz 3.9 thrust OC to 4.4 boost Haswell

  MoBo: ASUS Maximus formula VI

  RAM: 16GB TeamGroup XTreme 2600 to 2400

  GFX: NVidia GTX680 CUII Direct

  Drive system: Corsair Force 3 240GB SDD

  Data disk: Barracuda 3 TB Samsung

  OS: Windows 7 Ultimate with SP1 and updates

  Utility MoBo: HAVE suite 3

  Error details:

  Source: WHEA-Logger

  EventID: 18

  A fatal hardware error occurred.

  Reported by component: Processor Core
  Source of the error: Machine Check Exception
  Error type: error in Cache hierarchy
  Processor ID: 6

  Details of the event:

  
   
     
      18
      0
      2
      0
      0
      0 x 8000000000000000
     
      13356
     
     
      System
      Aurelie-PC
     
   
   
      3
      6
      1
      0xbf80000000000124
      0x415d01780
      0 x 86
      9
      1
      256
      2
      256
      0
      256
      256
      256
      928
     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
   
  

  I downloaded the minidump in my google docs to share:

  https://drive.Google.com/file/d/0BwKeBQWlRiHlNU5Md2VCWGpqSjA/edit?USP=sharing

  Any support you can give to help understand the cause would be useful

  Hello

  Thanks for the reply.

  I suggest you to post the question on the link below. His link of Windows 7 for the TechNet Support forums. They are the team who work for the issue that you are facing.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Feel free to write us if you still encounter problems related to Windows.

• machine check exception - windows 8

  I just bought a new PC. It continues to crash with the following error appears;

  1. check exception machine (often)
  2 clock watchdog timeout (several times)
  3. several accidents where it does not go to the Blue error screen, but remains frozen.

  These errors occur shortly after startup in windows 8.

  The PC specification is;

  Ultra Durable card mother-GA-B75M-D3H
  3.2 Intel i5
  Kingston 8 GB DDR
  2 TB hard drive

  I tried to delete one or the other memory chips and the erros continue to be committed. I checked the reset of all cards and updated the BIOS. Reformatted the hard drive and reinstalled Windows 8. I could not load windiws updates that the incident occurs before being committed. Errors still occur.

  Please notify.

  Thank you

  Thank you all for a responded to this problem.
  I have finally followed down to the wifi card is the problem. After doing a search, it seems that other people have found that it does not work with Windows 8, it seems that I should have done this before you buy the card!

• Machine Check Exception / blue screen

  I am running Windows XP, SP3.

  Recently, I experienced start-up problems. Occasionally, I get a blue screen:

  0X0000009C Machine_Check_Exception (0 x 00000004, 0X80546EF0, 0XB2000000, 0X00070F0F)

  I'm assuming that a hardware problem can be to spoil my boot process. This blue screen message indicates what in particular is causing the problem?

  Kind regards... John

  ZigZag3143 has the most experience BSOD to find here and I have nothing in my notes on that one, which means that I've never had to understand before.

  People on the wide Wide World of the Web seem to agree that it is some kind of hardware problem and with some of these mistakes, it isn't going to be a crash dump file if the CPU gets into such a funk that he just current quites of execution.  He can't write the dump file - it's just going to lock up and stop running.

  Other references indicate that there is no crash dump with this error.

  For example, systems with heat problems do not generate a crash dump file - the CPU enters a thermal event and it just turned off the system so no more damage and it's not going to be a crash dump file, but you may have a thermal event.

  Many theories of the cause and most unlikely, but it would not hurt to test your RAM (it will probably pass, but at least you can say you did) and other people suggest a deficient diet or a new material has been added which contributes to the problem, or some hardware puff like a CD/DVD drive.  I couldn't find something where someone has the eureka moment with this error.

  You recently said you have had this problem, so can you think of anything whether material wise who might have changed?
  You have an external unit any which may temporarily disconnect when there is a problem starting to see if things work better when they are disconnected?
  If the system is a desktop computer, you can temporarily disconnect things like your CD/DVD drive.

  I think it might be a process of elimination...  Power supplies are not too expensive to today and need me more time to pick one he made to replace one.

  If you want to test your RAM, here are a few ideas:

  Run a test on your RAM with memtest86 + (I know it's annoying and will cost you a CD).

  Memtest86 + is a version more up to date of the old program memtest86 and they are not the same.

  The memtest86 + does not work under Windows, you will need to download the ISO file, create a bootable CD, boot on it and then run memtest86 +.

  If even a single error is reported is a failure and you do suspect of your RAM.

  If you have several sticks of RAM, you may need to run the test on them one at the time and change them out to isolate the particular omission of a single stick.

  Always keep at least the first Bank of occupied RAM so the test will find something to do and simply restart your system.

  Sometimes reinstalling the RAM in slots will relieve the error, but a failure is always cause for suspicion.

  The file and complete instructions on using a USB or CD drive are here:

  http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

  or here:
  http://www.memtest.org/
  Here is a link that shows that you create and use the CD memtest86 +:

  http://www.GeeksToGo.com/Forum/Guide-to-using-Memtest86-t246994.html

  If someone says to run memtest86, you can tell them to go sand paper and that you know memtest86 + replaces memtest86 and here's why:

  http://en.Wikipedia.org/wiki/Memtest86

  Microsoft also has a test tool used to run out of memory, but there is a copy on my SkyDrive:

  This 'tool' is MIA from Microsoft for some time but there's a copy on my SkyDrive, you can download (mtinst.exe).

  I downloaded a copy of the Test utility of Windows memory on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, save it to your desktop, launch (double-click on it) and follow the instructions.

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called mtinst when the name of the file should really be called mtinst.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  Double-click mtinst.exe to start it and follow the instructions.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

  Original title: Error in the printer for 16-bit application that is running in Windows7 32

  I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.

  Hello

  Have you tried the methods suggested in my previous post dated August 29?

  Response to help you further.

• Will simply be to unplug router to restart the cause of the long-term damage it?

  my router Belkin had an option to plan restarts by choosing the days and times, and I would like something similar for my nighthawk ac2350 v2, to keep smoother things because I always reset my router sometimes when a device loses / reconnects wifi again and again. a simple reboot solves the problem for a few days to a week or more.

  in any case, I'm considering using a programmable electric timer to schedule a reboot twice a week, and my question is if I simply cut power briefly to restart it will cause damage?

  I mean cut the power supply of abruptly vs by pressing the power button on the router or do the reset through the interface of the router

  With the help of a timer is not a problem. Others do the same for several routers.

  EDIT: Basically the power button did the same thing. Just a cleaner way of cutting to a device power.

• Windows cannot load of Rise of Nations and when I restart it blocks my machine

  I have a new Dell laptop with Windows 7 above.  I have an older game, Rise of Nations, I love to play.  I went to load it on my machine and it loads fine, but it does not open.  When I restart the machine, I get a locked machine.  I had to reboot in safe mode and restore to an earlier date.  Has anyone found a workaroundfor this?  I hate to say goodbye to this game.

  have you tried compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  MCP. MCDST. LVL 80

• Restarting the management agents on ESXi 4.1 / risk to restart the guest virtual machines?

  Unfortunately, we must restart management on our HP ML350 G6 agents almost once a week (unable to connect with VSphere client more, customers are works well).

  We know this Article -: restart on an ESX or ESXi Server management agents

  and this article useful: http://www.vm-help.com/esx/esx3i/ESXi_restart_agents.php

  How can we avoid the ESXi 4.1 command /sbin/services.sh restart will restart our execution of virtual machines (guests) as well?

  (Our first test shows: it restarts the guests, but it is sure, or just happy coincidence?)

  According to the second article linked:

  ... This will restart the agents installed in /etc/init.d/ and with a default installation that includes: pass, ntpd, sfcbd, sfcbd-watchdog, slpd and wsmand. He is aalso restarting the agent VMware HA (AAM) if that has been activated on the host...

  Each of the agents of this is responsible for our virtual computer operation invited?

  Do we ensure "auto start/stop" to each virtual machine too (as written in "Attention" on the first linked article)?

  I think it was on ESX 3.5 U3 corected. In any case, this happened only if you autostart enabled for VMS - the ability of ESX Server to boot VMs when it starts itself. If you do not need, leave it disabled.

  Each of the agents of this is responsible for our virtual computer operation invited?

  Not at all. Virtual machines running in a very low level of the VMkernel. Even if you lose the COS (which is your main problem here - you should check it...) the VMs will still work.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• schedule a restart of the virtual machine

  Is it possible to set up a schedule a reboot for VM of CR or in any other way?

  For restarts of the annex, it is best to do so within the guest and do not force a reboot of the VCenter.

  For one the VCenter will signal just the tools to do it, but the tools do always not react if the VM cared, but if you set the prompt to reboot using the Manager tasks or something similar, you have more control over the process of restarting, like forcing users, waiting for a period of time to allow users to log out with elegance etc... If you just put the virtual machine restart, that's how he will be treated a reboot now, and no action is possible.

• The IP address has changed on the Officejet L7590 caused XP machine does not see

  I have an Officejet L7590 connected to my wireless router, and it was works very well with our laptop Win XP via the network wireless for a few weeks. Then all of a sudden, we couldn't connect. So I checked the IP address through the front panel to find that he had changed from x.x.x.3 to x.x.x.4. By looking at the advanced properties of the control panel-> printers area he showed at the address x.x.x.3 (though that a button has been checked to always say 'print to this same device if its ip address changes'.

  So I managed to force a change to make it work by changing the ip address in the printer Control Panel icon manually, but nobody knows how to stop what is happening yet? What are the causes the IP address of the printer to change anyway - he is using DHCP of course but they change whenever you turn it on? We usually spend the printer off every night...

  Thank you!

  Nick

  Hello

  Set a manual IP address on the HP all-in-one device

• Having trouble installing Photoshop CS6. "Machine to restart pending." Reboot machine has no effect.

  I found several related articles, but none of them could solve my problem. I got a new computer with Windows 8 and I was going to install Photoshop CS6 on it, but then I had this dialogue.

  

  Restarting the computer does nothing; the dialogue just reappear. I had this same problem with my last computer too a year previously, but I chose eventally then ignore it. I was able to install Photoshop with success, but there are features that don't behave the way they were supposed to. I got a recording layers did not independently and that the glitch acted fill tool. When I ignored the dialogue while trying to install Illustrator and InDesign CS6, there are characteristics that do not behave the same with them as well.

  
  

  Now, I really don't want to ignore this time Setup. I got a new computer, and I really want everything to work. I really think that this dialogue indicates a type of error, and I really want to get out before installing anything. I don't want to repeat the same questions.
  

  Resolution of error messages. CS5, CS5.5 bootstrapper

• Premiere Pro software mid-project update causes unexpected behavior

  This is not the first time, Adobe made this mistake, I hoped they learned previous errors...

  Try updates carefully before sending it to the public, that's my opinion.

  now I'm losing time to try to resolve this issue, contact the manufacturers of plugin etc etc.

  Why is this still not compatible with previous versions once, what do...

  I'm really amused!

  The first has never been backward compatible.

  General advice since always never update while on an important project (especially with a deadline)

  I always keep their projects and the first versions on my computer.