Machine Check Exception / blue screen

Similar Questions

• Restart: Machine Check Exception Cache hierarchy error (18 events)

  I'm getting reboots on my machine all night (I have a few tasks planned during the night) which means that when I wake up scheduled tasks have not taken place.  Windows reports he had an unexpected restart and verification of that event viewer indicates that there are 18 of the WHEA-Logger event.

  Note: the machine is overclocked, but synchronization is a conservative OC using presets on the motherboard (4.6Gz was not stable so it is on 4.4, I have not tried to manually tweak it more because it's not worth the effort), with the RAM OC below the XMP profile supported.  A 4-hour race with Prime95 test complete instruction set (105W) showed no problems and a CPU temperature has not managed 60 c with considerably lower than that of the RAM, so I'm sure no problem with cooling.  In addition he has not been seen when running anything, only nights that has suspect me something in the States of sleep or power-saving modes is not responding well to a software or settings of the OC.

  System details:

  CPU: Intel i7 - 4770K 3.5Gz 3.9 thrust OC to 4.4 boost Haswell

  MoBo: ASUS Maximus formula VI

  RAM: 16GB TeamGroup XTreme 2600 to 2400

  GFX: NVidia GTX680 CUII Direct

  Drive system: Corsair Force 3 240GB SDD

  Data disk: Barracuda 3 TB Samsung

  OS: Windows 7 Ultimate with SP1 and updates

  Utility MoBo: HAVE suite 3

  Error details:

  Source: WHEA-Logger

  EventID: 18

  A fatal hardware error occurred.

  Reported by component: Processor Core
  Source of the error: Machine Check Exception
  Error type: error in Cache hierarchy
  Processor ID: 6

  Details of the event:

  
   
     
      18
      0
      2
      0
      0
      0 x 8000000000000000
     
      13356
     
     
      System
      Aurelie-PC
     
   
   
      3
      6
      1
      0xbf80000000000124
      0x415d01780
      0 x 86
      9
      1
      256
      2
      256
      0
      256
      256
      256
      928
     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
   
  

  I downloaded the minidump in my google docs to share:

  https://drive.Google.com/file/d/0BwKeBQWlRiHlNU5Md2VCWGpqSjA/edit?USP=sharing

  Any support you can give to help understand the cause would be useful

  Hello

  Thanks for the reply.

  I suggest you to post the question on the link below. His link of Windows 7 for the TechNet Support forums. They are the team who work for the issue that you are facing.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Feel free to write us if you still encounter problems related to Windows.

• HP DL585 G7 - restart incorrigible caused unexpected Machine Check Exception

  Hello

  I have a HP DL585 G7 and ESXi 5.1 is installed on it.

  The server has been restarted due to MCE I found on ILO IML, error looks like this: incorrigible Machine Check Exception (Board 0, processor 2, APIC, ID 0 x 00000040, Bank 0 x 00000004, status 0xF6000000 '00070F0F, address 0 x 00000019' 9C5BFA00, Misc 0 x 00000000 00000000')

  Also, I found this on vmkernel.log: MCE: 635: property of the Bank/CPU-package fixed 12 MCE settings
  

  Update my BIOS of the server and political power is "HP High Performance Mode static.

  Can someone help me find the root cause?

  The answer is published on this page: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=4161627&docId=mmr_kc-0117152&docLocale=en_US

• machine check exception - windows 8

  I just bought a new PC. It continues to crash with the following error appears;

  1. check exception machine (often)
  2 clock watchdog timeout (several times)
  3. several accidents where it does not go to the Blue error screen, but remains frozen.

  These errors occur shortly after startup in windows 8.

  The PC specification is;

  Ultra Durable card mother-GA-B75M-D3H
  3.2 Intel i5
  Kingston 8 GB DDR
  2 TB hard drive

  I tried to delete one or the other memory chips and the erros continue to be committed. I checked the reset of all cards and updated the BIOS. Reformatted the hard drive and reinstalled Windows 8. I could not load windiws updates that the incident occurs before being committed. Errors still occur.

  Please notify.

  Thank you

  Thank you all for a responded to this problem.
  I have finally followed down to the wifi card is the problem. After doing a search, it seems that other people have found that it does not work with Windows 8, it seems that I should have done this before you buy the card!

• Core security check failure blue screen on Windows 8

  Whenever I'm playing games such as sometime V or even just browse the internet or Watch youtube my computer hangs and has a blue screen saying kernel security check failure and my pc restarts. She often does. Is there a way to fix this?

  KH

  First of all, you need to upgrade to win 8.1 as in itself, it may solve the problem

  These related to the MRVW24C.sys Device driver for Marvell NIC of Marvell Semiconductor 802.11n your 2007

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Could not open the virtual machine after Windows blue screen

  I updated my machine Windows 8, he projected blue, now I can't open my VM that I had open at the time of the blue screen.

  This is the message that I received from VMware Workstation 10 attached.

  Search for files of *.lck in virtual machine directory - delete them all.
  Also delete the directories named *.lck

  Then try again - if it still does not need more details

• Error System Service Exception blue screen BCCode: 3B

  For about 3 weeks, my Vista 64-bit machine has started meeting with a BSOD. I met four accidents in 3 weeks. However, this does not happen very often as a point, I went a week and a half without crashing. I ran MemTest86 + for 12 hours, with 10 passes completed without error reported.

  The accident occurs generally when I have several programs open, which includes a game like DOTA 2, Spotify, Skype and Google Chrome.
  I've updated my network driver and I just updated my video card driver, but it remains to be seen if this will help. Looking for a simple list of things that I can start going through, starting with the most common causes of this type of system Service Exception BSOD. You will find additional information below:

  Signature of the problem

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 3B

  BCP1: 00000000C 0000005

  BCP2: 0000000000000000

  BCP3: FFFFFA600C5BFF10

  BCP4: 0000000000000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Information about the server: 448e9b3d-41d5-40c5-bd68-1a4f420dafe8

  I also have a dump file mini that I could provide if necessary.

  Associated with the Solo - 1 Sunbelt Personal Firewall SbFw.sys driver.  I would remove at least to test.

  Please remove the viewing programs of CD such as Daemon Tools and Alcohol 120%.

  They use a driver, are in your dmp, called c:\windows\system32\drivers\sptd.sys, which is known to cause a BSOD.

  Use this program to uninstall SPTD DuplexSecure
  -Http://www.duplexsecure.com downloads

  When you are finished, you can use this Freeware:

  MagicISO Virtual CD/DVD-ROM (MagicDisc) instead

  http://www.MagicISO.com/download.htm

• system service exception blue screen

  With the help of a connected USB GPIB adapter 2015 LabView, NI Max worm. 15 and the NI 2 488. Replace the old system. New system with the same versions of software installed causes a BSOD when run us our program or "scan" for devices the BSOD looks as follows.

  System Service exception

  ni488k.sys

  0 x 00000033 (0x00000000C0000005) FFFFF8800A44702E

  any ideas?

  Tried several different things but ultimatlely I think I have all the updates from Windows update has solved the problem.

• Blue screens on Satellite A210

  I have a satellite A210-158 and on several occasions he gets blocked and after restarting the message blue screen appeared.
  After analyzing the minidump with Windbg program proposed the following source is displayed:

  Debug version of Windows * Microsoft (R) 6.12.0002.633 X 86 *.
  * Copyright (c) Microsoft Corporation. All rights reserved.*

  * Loading dump file [F:\041310-42354-01.dmp]*
  * Mini kernel dump file: only registers and the trace of the stack are available *.

  * Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols. *
  * Executable search path is: *.
  * Windows 7 Kernel Version 7600 MP (2 processors) Free x 64 *.
  * Product: WinNt, suite: TerminalServer SingleUserTS *.
  * Built by: 7600.16385.amd64fre.win7_rtm.090713 - 1255 *.
  * Machine name: *.
  * Kernel base = 0xfffff800 '02800000 PsLoadedModuleList = 0xfffff800' 02a3de50 *.
  Debug session time: Tue Apr 13, 2010 (UTC + 02:00) 21:04:23.485 *.
  * System Uptime: 0 days 0:00:20.482 *.
  * Loading kernel symbols *.
  *................................................. .. *
  * Loading user symbols *.
  * Mini kernel image does not contain unloaded driver list *.
  ************************************************** *******************************
  ** **
  ** Bugcheck Analysis **
  ** **
  ************************************************** *******************************

  * Use! analyze - v to obtain detailed debugging information

  * Error checking 124, {0, fffffa80028932b8, 0, 0} *.

  * Probably caused by: material *.

  * Follow-up: MachineOwner *.
  *---------*

  * 0: kd >! analyze - v *.
  ************************************************** *******************************
  ** **
  ** Bugcheck Analysis **
  ** **
  ************************************************** *******************************

  * WHEA_UNCORRECTABLE_ERROR (124) *.
  * A fatal hardware error occurred. Parameter 1 identifies the type of error
  * source that reported the error. Parameter 2 contains the address of the *.
  * Structure WHEA_ERROR_RECORD which describes the error conditon.*
  * Arguments: *.
  * Arg1: 0000000000000000, Machine Check Exception *.
  * Arg2: fffffa80028932b8, the address of the WHEA_ERROR_RECORD structure.*
  * Arg3: 0000000000000000, 32 - significant bits of MCi_STATUS valeur.*
  * Arg4: 0000000000000000, low 32 - bits of the MCi_STATUS valeur.*

  Debugging details: *.
  *------------------*

  * BUGCHECK_STR: 0x124_AuthenticAMD *.

  * CUSTOMER_CRASH_COUNT: 1 *.

  * DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT *.

  * Nom_processus: System *.

  * CURRENT_IRQL: 0 *.

  * STACK_TEXT: *.
  ' * fffff880 '02db96f0 fffff800' 02abaa89: fffffa80 ' 02893290 fffffa80 ' 01757b 60 00000000' 00000000 0000002e 00000001': nt! WheapCreateLiveTriageDump + 0x6c *.
  * fffff880'02db9c10 fffff800'0299 c 547: fffffa80'02893290 fffff800 '02a155f8 fffffa80' 01757b 60 00000002'00000005: nt! WheapCreateTriageDumpFromPreviousSession + 0 x 49 *.
  * fffff880 '02db9c40 fffff800' 02904b 95: fffff800 ' 02a 77360 fffffa80 '02939be8 fffffa80' 02939be0 fffffa80 ' 01757b 60: nt! WheapProcessWorkQueueItem + 0 x 57 *.
  * fffff880 '02db9c80 fffff800' 0287f161: fffff880'00c65e00 fffff800 '02904b 70 fffffa80' 01757b 60 00000000 00000000': nt! WheapWorkQueueWorkerRoutine + 0 x 25 *.
  * fffff880 '02db9cb0 fffff800' 02b 15166: 00000000 00000000' fffffa80 '01757b 60 00000000 00000080' fffffa80' 016c9b30: nt! ExpWorkerThread + 0 x 111 *.
  * fffff880'02db9d40 fffff800'02850486: fffff880'009e9180 fffffa80 '01757b 60 fffff880' 009f3f40 00000000' 00000000: nt! PspSystemThreadStartup + 0x5a *.
  * fffff880'02db9d80 00000000' 00000000: fffff880'02dba000 fffff880 '02db4000 fffff880' 02db9800 00000000' 00000000: nt! KxStartSystemThread + 0x16 *.

  *, STACK_COMMAND: kb *.

  * FOLLOWUP_NAME: MachineOwner *.

  * MODULE_NAME: material *.

  * Nom_image: material *.

  * DEBUG_FLR_IMAGE_TIMESTAMP: 0 *.

  * FAILURE_BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR__UNKNOWN_PRV *.

  * BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR__UNKNOWN_PRV *.

  * Follow-up: MachineOwner *.
  *---------*

  I have already been materialized from the BIOS, but the problem hos continued to appear.
  Is there a solution?
  Thanks in advance
  Blanca

  Hello

  There DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT mentioned.
  Maybe the BSOD appears due to some problems with some Vista drivers.

  It's really hard to say what's going wrong here.
  Have you tried to recover the laptop to check if the BSOD would appear again
  Maybe you should do this.

• laptop blue screening guard

  I'm running win7 and from time to time I get the blue screen, it was shut off too quick to intercept the error on blue screen, but rather those that I managed to get was STOP: 0 x 00000124 (0x00000000, 0x860e9024, 0xe2000040, 0 x 00000800

  I had my graphics card with some problems with appear as unable to begin that I managed to put down to the outdated driver, I installed a driver listed for mine and it seemed to solve this problem, but now the accidents began. I have an ATI Mobility Radeon HD 4670. I did tests antivirus without result, tried to run the windows tools to find and fix problems with no luck either.

  as I was trying to post this laptop has crashed again, but this time the screen flashed red, green, blue, which baffled me completely because I never met it. I tried the system restore, but apparently this custom works because a file is not available, but it does not say that. I think he might be linked to the driver I installed, but im not sure, since installing it things work better with videos etc, but of course accidents began with her.

  HEEEEELLLLLPPPPP

  LB

  These are related to materials and called a BCC124.  Since she deducted "genuine Intel" I'd start with the CPU stress tests.  If you are overclocking STOP!

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".

  
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\053114-58968-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.x86fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0x82a17000 PsLoadedModuleList = 0x82b605b0
  The debugging session: 00:54:02.253 sam 31 May 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:09.032
  Loading the kernel symbols
  ......................................................
  Loading user symbols
  Mini Kernel Dump does not contain the list of discharged drivers
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 124, {0, fc 861278, 0, 0}

  Probably caused by: GenuineIntel

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  WHEA_UNCORRECTABLE_ERROR (124)
  A fatal hardware error occurred. Parameter 1 identifies the type of error
  source that reported the error. Parameter 2 contains the address of the
  WHEA_ERROR_RECORD structure that describes the error condition.
  Arguments:
  Arg1: 00000000, Machine Check Exception
  Arg2: 861278fc, the address of the WHEA_ERROR_RECORD structure.
  Arg3: 00000000, 32 - bits of MCi_STATUS value of.
  Arg4: 00000000, low 32 - bits of MCi_STATUS value.

  Debugging information:
  ------------------

  BUGCHECK_STR: 0x124_GenuineIntel

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  STACK_TEXT:
  8cf17cc4 82ae886d 861278e0 82b7f988 82b7f980 nt! WheapCreateTriageDumpFromPreviousSession + 0x32
  8cf17ce4 82ae9689 82b7f980 861278e0 82b7f9b0 nt! WheapProcessWorkQueueItem + 0 x 56
  8cf17d00 82a9414b 82b7f980 00000000 84f74798 nt! WheapWorkQueueWorkerRoutine + 0x1f
  8cf17d50 82 c 20141 00000001 aa899a40 00000000 nt! ExpWorkerThread + 0x10d
  8cf17d90 82ac7559 82a9403e 00000000 00000001 nt! PspSystemThreadStartup + 0x9e
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x19

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: GenuineIntel

  Nom_image: GenuineIntel

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  IMAGE_VERSION:

  FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS_PRV

  BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS_PRV

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x124_genuineintel_processor_bus_prv

  FAILURE_ID_HASH: {f507296b-20ca-dc3b-cebf-36d51efdb93d}

  Follow-up: MachineOwner
  ---------

• The computer restarts or a blue screen during the game League of Legends

  Hi, lately I changed my motherboard, processor, RAM and. I played League of legends normally, but the last days he started crashing. The computer restarts or gives me a blue screen after playing League of legends for quite awhile, but it doesn't happen with league of legends, I also play other games like cs, World of Warcraft and 14 of FIFA.

  I downloaded the file .dmp to one player in this link below:

  https://onedrive.live.com/redir?RESID=24D44C1E00C3A1DB! 172 & authkey =! AJJoxzCr1dPqhwM&ithint=file%2c.dmp

  It says BCCode: 124. If anyone can help me I'll really apreciate it.

  Forgive me for writing erros because I'm not American, so I do not write really well.

  Thank you.

  Hi, lately I changed my motherboard, processor, RAM and. I played League of legends normally, but the last days he started crashing. The computer restarts or gives me a blue screen after playing League of legends for quite awhile, but it doesn't happen with league of legends, I also play other games like cs, World of Warcraft and 14 of FIFA.

  I downloaded the file .dmp to one player in this link below:

  https://onedrive.live.com/redir?RESID=24D44C1E00C3A1DB! 172 & authkey =! AJJoxzCr1dPqhwM&ithint=file%2c.dmp

  It says BCCode: 124. If anyone can help me I'll really apreciate it.

  Forgive me for writing erros because I'm not American, so I do not write really well.

  Thank you.

  Richard

  WHEA_UNCORRECTABLE_ERROR (124)
  A fatal hardware error occurred. Parameter 1 identifies the type of error
  source that reported the error. Parameter 2 contains the address of the
  WHEA_ERROR_RECORD structure that describes the error condition.
  Arguments:
  Arg1: 0000000000000000, Machine Check Exception
  Arg2: fffffa80083e3038, the address of the WHEA_ERROR_RECORD structure.
  Arg3: 0000000000000000, 32 - bits of MCi_STATUS value of.
  Arg4: 0000000000000000, low 32 - bits of MCi_STATUS value.

  WHEA_UNCORRECTABLE_ERROR (124)
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557321 (v = vs. 85) .aspx

  Resolution of the bluescreen errors.
  http://go.Microsoft.com/fwlink/?LinkId=183646

  Note: I find it curious that no USB driver have been loaded in the course of this accident... None. Have you installed the drivers from the Chipset of your motherboard after the change?

• blue screen error and the memory of dumping

  Dear all,

  Beyond 20 days before my knees worked well, with any problem.

  OS: win 7 home.

  recently I updated all the patches update.that time Windows first problem started in the MSE.

  Error: Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  Due to this blocking of the system frequently. some time system starts window in a few second, or after the windows login began with a few min.and then memory dump and the blocking of the system and blue sceen dump.

  while I removed the MSE and also checked, after that also are having problems.

  Help reslove the issue.

  Please find the shared memory dump

  https://SkyDrive.live.com/#CID=F1D72CACC8DEB263&ID=F1D72CACC8DEB263%21126

  As well as the problems of now some think like this as follows,

  A fatal hardware error occurred.

  Reported by component: Processor Core

  Source of the error: Machine Check Exception

  Error type: internal Timer error

  Processor ID: 4

  View details of this entry contains more information.

  Hi Er.Nirmal,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Satellite A10: blue screen error: 'kernel_inpage_data_error '.

  When I turn on my laptop, it works fine for a little bit, and then after some time (usually when I do an antivirus check) a blue screen comes up saying "windows xp has been closed because the file"kernel_inpage_data_error"does not work or something.

  This error keeps occurring. So I used the recovery disks to reinstall XP but the same error appeard again. And when I installed Xp again, it asks me to register & when I don't fill in my information he says "we'll call a phone to sign up" but then he says theres no dial tone.

  I use broadband services and xp does not ansk me what type of internet that I use. It ask me to enter the serial number of my xp at any time. This way im can not get automatic updates more or it's just that I am not yet registered?

  How can I register? The laptop belonged to someone else before and things were enrolled in his account before. I'd be happy if someone could kindly help out me.

  see you soon

  Hello

  First of all, on the Toshiba Recovery CD you will find an operating system image that is always on and it is not possible or necessary to activate or to any key.

  Secondly, I found this Microsoft page that describes this error message:
  http://support.Microsoft.com/?kbid=315266

  On this page you will find information that it is possible that the master boot record is infected with a virus.
  I na? t have experience with "master boot record" virus but maybe formatting drive HARD integer it will erase. " However, this is only a suggestion.

  If you are not able to solve this problem yourself, you should ask Toshiba service for assistance.

• Card reader blue screens

  I have three Thinkpads with integrated card readers: a X 61, a R61 and T500.  All have been running Windows 10 for awhile; all are on the ring 'quick compilation.  And for several months, all three have the same unusual problem when using the card reader.  If the card is formally ejected through the windows, or if the card is simply deleted, machines with a blue screen failure WORKER INVALID.  It is always reproducible on all machines.

  I tried different drivers Ricoh fished from the web without affecting the question.

  After scratching my head for several months, I'll ask if anyone has any ideas for a possible cure.

  Art

  Generation of today 14959 claimed - properly! -that this problem has been fixed. We are happy!

• Blue screen after the work of completely P2V conversion completed

  Hi all

  I have try the P2V of Powered - on Windows XP conversion.

  The conversion work was finished with the status "completely."

  However, after that, when I try to power on the target of the Win XP on ESXi machine, the machine displays the blue screen and does not start.

  If there is a way to solve this problem, would you please let me know?

  [more info]

  1.

  I chose the installation of vmware tools option in the conversion with VMware Converer autonomous steps.

  However, it was not installed in the target machine Win XP on ESXi.

  2.

  In this Windows XP P2V conversion, I can always find a certain caveat on the sysprep file in Converter Wizard.

  The warning is "Impossible to locate the necessary Sysprep files."

  Due to the expiration of the period of support for Microsoft's Windows XP, I can't do anything about this warning.

  The default disk for XP controller is BusLogic, specially for 32-bit Windows. It might work with LSI Logic, too but with SAS - hardly.

  The warning of sysprep is on the customization steps. If you do not it - ignore it.

  In regards to the VMware tools - you can install later vsphere client, after fixing the boot

  HTH,

  Plamen